Kullanılmış Faymonville Faymonville F-S44-1Bby / Hydraulic Expandable -... satın al (36.051)

Durum: yeni, azami yük ağırlığı: 96.500 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 26.900 mm, toplam genişlik: 2.750 mm, Donanım: ABS, Our complete range of vehicles, including those available immediately and at short notice, can be found on our website. Excerpt from the equipment features. Full equipment details available on request. Gsdpfx Aqjzahp Sotebn Gooseneck: * Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm * For tractors: 6 x 4 or 8 x 4 * Truck hydraulic connection with flow regulator (20 l/min), including gallows for suspension of supply lines. The tractor's tank must have a minimum capacity of 80 L * With MAX Trailer couplings, otherwise coupling parts to be supplied ex works by the customer * Gallows with winch for spare wheel located at the front of the gooseneck * 3.5 inch kingpin * Steel front wall approx. 400 mm high * Plug-in aluminium side and rear boards for the gooseneck, approx. 400 mm high, anodized finish * Operating levers on the gooseneck protected by a foldable cover * Illuminated controls at the gooseneck, with on/off switch * One 7-pin socket left and right at the rear of the gooseneck for warning sign * BEKA-MAX central lubrication system for a gooseneck using standard grease NLGI-2 * Hydraulic couplings from gooseneck to lowbed deck with screw-type couplers * Access steps to the gooseneck * Four warning panels extendable approx. 1,000 mm, approx. 423 x 423 mm, with one LED marker light and bracket for rotating beacon * Mounting adapter for 2 spare wheels * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 HP) at 3,000 rpm * Hydraulic connection lines between the power pack and the connector plate at the gooseneck * One LED work light left and right at the rear plate of the gooseneck with separate on/off switches * Radio remote control: - Operation of the power pack, start/stop of the diesel engine. - Operation of steering, in addition to cable remote control, with 2 LED indicators on the receiver for single-track monitoring. - Operation of raising/lowering the gooseneck. - Operation of raising/lowering suspension of running gear. 2-Axle Front Bogie: * Pin-eye coupling front and rear. Length: approx. 2,970 mm; bogie width: approx. 2,750 mm * BEKA-MAX central lubrication system for a 2-axle bogie with standard grease NLGI-2 (not connected to the tie rods) * One 7-pin socket left and right at the rear of the front bogie for warning panels * Bogie surface finished with painted-in sand coating for slip-resistance * Yellow reflective tape according to EU regulations on the side, at extension and at the rear of the trailer * One 7-pin socket for warning panels, left and right at the front bogie, in the axle area * Extendable extensions of approx. 230 mm per side for a 2-axle bogie * 1 pair of M42 threaded blocks between the axles of the front bogie * 1 pair of brackets for warning panels to be inserted into the stake pockets on the outer frame of the load bed Load Bed: * 6-axle, double telescopic load bed with pin-eye coupling at the front and a rear bevel of approx. 500 mm x 8° * Load bed length: approx. 11,000 mm * Technically extendable by approx. 8,200 + 7,700 mm * Axle spacing: approx. 1,500 mm * Standard width: approx. 2,750 mm * Hydraulic coupling pin * BEKA-MAX central lubrication system for the load bed with standard grease NLGI-2 * Load bed surface finished with painted-in sand coating for slip-resistance * 11 pairs of recessed lashing rings in the outer frame of the load bed, foldable outwards (LC 10,000 daN) * Permanently welded intermediate platform, approx.

Durum: yeni, azami yük ağırlığı: 42.900 kg, toplam ağırlık: 55.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 29.000 mm, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of vehicles, including those available immediately or at short notice, on our website. Excerpt from the specification. Full equipment details available upon request. LOAD AREA: * Gooseneck, length approx. 3,900 mm with central beam * Load area with double telescopic extension, length approx. 9,300 mm * A support table approx. 200 mm wide is permanently welded to the central beam * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the relevant load area length (except for the supply of the first and second locking points) * Technical fifth wheel load: 25,000 kg for tractor units: 4 x 2, 6 x 2, and 6 x 4 * TPMS tire pressure monitoring system in compliance with ECE R 141 * BPW axles and suspension; all axles hydro-mechanically forced-steered, mounted on turntables * Technical axle load per axle: 12,000 kg; air suspension with lift and lower valve * 275/70 R 22.5 3PMSF twin tires. Manufacturer of our choice * ASPÖCK-UNIBOX on the front connector strip with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for controlling hydraulic functions * 3 pairs of recessed lashing rings in the outer frame of the gooseneck, foldable outward Gsdpfjyvnd Nex Aqtebn * 1 pair of lashing rings (LC 10,000 daN) at the king pin – all other lashing rings (LC 5,000 daN) * 3 pairs of stake pockets recessed in the outer frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 1 crosswise stake pocket rail mounted in the floor of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 1 at the rear of the gooseneck * 2-inch king pin * Mechanical landing legs with 2-speed gearbox and crank * 8 pairs of stake pockets recessed in the outer frame of the load area, for plug-in stakes approx. 100 x 50 mm * 10 pairs of recessed horizontal lashing rings in the outer frame of the load area, foldable outward * Steering override from the front and rear via cable remote control, with single-track alignment of the axles, no installation in the tractor unit * Last axle with air bellows venting activated by applying the parking brake * Bulkhead made of steel, approx. 1,600 mm high, certified in accordance with EN12642:2016 XL * Round NATO socket on the front connector strip (Maeler & Kaege VG 96 917) * 1 LED work light installed left and right at the landing legs with wiring to the tractor unit connection * Approx. 32 mm wooden floor on the gooseneck and load area * On the large cross-section telescopic tube, one locking position at approx. every 500 mm * On the small cross-section telescopic tube, one locking position at approx. every 1,000 mm, resulting in a locking option every approx. 500 mm * Cutouts in the outer frame of the load area for attaching lashing straps (LC 2,500 daN) * 4 crosswise stake pocket rails mounted in the floor of the load area, for plug-in stakes approx. 100 x 50 mm * 4 wheel chocks with holders under the load area * 1 lockable INOX toolbox, approx. 2,390 x 800 x 500 mm (L x W x H), mounted under the load area on the left in the direction of travel * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the load area on the right in the direction of travel * 1 LED work light mounted left and right in front of the axles with wiring * 2 axle load gauges mounted on the left side with axle load diagram included * 1st axle with automatic lift axle function and start-up a...

Durum: yeni, azami yük ağırlığı: 36.500 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the specification list. Full equipment details available upon request. GOOSENECK: * Gooseneck in SNT design for optimized loading deck length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 6° * For tractors: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX * Grating flooring with 5 mm steel reinforcement on gooseneck and rear chamfer * 2-inch king pin * Guide plate on the gooseneck for the fifth-wheel plate, approx. 500 mm wide * Round NATO socket at the front terminal strip (Maeler & Kaege VG 96 917) * On the gooseneck, one pair of removable side alu drop sides, approx. 400 mm high, anodized finish * One LED work light each mounted left and right at the top of the front wall, operated by on/off switch (operation from tractor unit not possible in this configuration) LOADING PLATFORM: * Loading platform, approx. 9,600 mm long, rear chamfer approx. 900 mm x 6° * Loading platform after gooseneck hydraulically liftable/lowerable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg * Continuous grating flooring with approx. 5 mm steel underlay on lift bed and loading platform for additional reinforcement, designed for point loads TYRES: 235/75 R 17.5 3PMSF twin wheel configuration. Brand at our discretion * TPMS tyre pressure monitoring system in accordance with ECE R 141 AXLES: * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle self-steering * 3rd axle with electromagnetically operated reverse lock, activated via reverse gear and manually * 1st axle with traction help * Technical axle load: 12,000 kg each Gsdpjy Auhhjfx Aqtebn * Air suspension with lift-lower valve HYDRAULIC LOADING RAMPS: * 1 pair two-piece AXS steel ramps with grating surface, approx. 4,920 mm long, approx. 900 mm wide * Hydraulically folding ramp tips * Ramps hydraulically adjustable approx. 235 mm outward and approx. 365 mm inward independently * Flashing lights on outer side of ramp tips, switch located next to ramp controls * Transport lock for ramps using quick-lock mechanism * On-outline sand coating finish on ramp outer frame and ramp tips * Mechanical drop-leg supports on the sides of the ramps for aligning with unloading docks * Control valves for hydraulic ramps located on the right side of the vehicle BRAKING SYSTEM: WABCO EBS-E braking system, meets current EU requirements SURFACE PROTECTION: * HRM-metallization of full vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimum corrosion protection PAINTWORK: * Trailer in carmine red (RAL 3002) * Rims in silver grey * Side panels: natural aluminum * Wheel hubs per axle manufacturer * Lamp panel in pure white (RAL 9010) EQUIPMENT: * Front wall made of steel, removable, approx. 1,600 mm high, incl. connector plate for supply lines to tractor mounted approx. 1,000 mm from the lower edge of the outer frame * Lash chain securing points at inside front wall (left and right), with aluminum troughs below left and right for chain or ratchet strap storage * Behind front wall: approx. 12 mm thick DELIGNIT board bolted on * Two additional pairs of bolted lashing rings (LC 5,000 daN) * Electric cable winch, pulling force approx. 5,400 kg, with radio remote control. Steel cable approx. 24 m long, cable diameter approx. 9.5 mm, incl. cable feed guide.

Durum: yeni, azami yük ağırlığı: 30.190 kg, toplam ağırlık: 43.000 kg, dingil konfigürasyonu: 2 dingil, Donanım: ABS, You can find our full range of vehicles, including immediately and short-term available units, on our website. Excerpt from the Equipment List. Complete equipment details available upon request. Loading Platform: - Low bed with external beams, designed as extendable SUPER LOW version, approx. 6,850 mm in length - Low bed with fixed hardwood floor, approx. 40 mm thick, and mechanical locking - Service lines routed securely inside the extendable beams, automatically adjusting to the respective bed length - 5 pairs of lashing rings, foldable to the outside (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for mounting bolted RUD rings Gooseneck: - Gooseneck in SNT design for optimized loading length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth wheel load: 23,000 kg - For tractor units: 4x2, 6x2 Rear Chassis: - Rear chassis in short version with closed outer frame and checker plate cover - Chassis with excavator recess, closed in the rear half to accommodate air tanks - 2 pairs of lashing rings, foldable to the outside (LC 5,000 daN) - 1 pair of lashing rings, foldable to the outside (LC 10,000 daN) - 1 pair of lashing rings, horizontal, mounted at the front & rear of the chassis (LC 10,000 daN) Axles: - BPW axles with hydro-mechanical forced steering - Technical axle load: 12,000 kg each - Air suspension with lift and lower valve Tyres: - 245/70 R 17.5 3PMSF tyres - Manufacturer of our choice - Load index (146/146F) - TPMS tyre pressure monitoring system per ECE R 141 - Data transfer to the tractor via standardized EBS interface (ISO 11992) - The tractor must be capable of transmitting and displaying these data for correct indication Brake System: - Brake system compliant with EU regulations, with EBS-E (2S2M) Electrical System: - Electrical system compliant with EU regulations, 24-volt lighting ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the turn signal - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S, and 15-pin sockets according to ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Steel Structure: - Made from high-strength fine-grained steels - Steel grades: S355J2+N / S355MC (yield strength 355 MPa), S690QL / S700MC (yield strength 690 MPa) Coating: - Complete steel frame automatically shot-blasted after welding - Second blasting treatment with corundum for optimal coating adhesion Gjdpfxjxarl No Aqtobn - HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for superior corrosion protection - Final topcoat: 2 layers of 2K paint, single color, RAL 3002 carmine red, in accordance with RAL system 841GL - Rims in silver - Rear section metallized and painted in RAL 9010 (pure white) - Metallic paint not available - Paint build-up tested in salt spray fog test according to ISO 9227-NSS - Cavity sealing with special wax Including the following additional equipment: - 2-inch king pin - One galvanized steel front wall, approx. 400 mm high - Remote steering from front and rear, cable remote controlled via push buttons, with single-track steering alignment (installation in the tractor unit not included) - Hydraulic connections from gooseneck to low bed with multi-coupling instead of screw couplings - Electro-hydraulic power unit - Preparation for mounting of bolt-on container positions for 1x 20' or 1x 40' container on the external beams - Without container locks

Durum: yeni, azami yük ağırlığı: 36.040 kg, toplam ağırlık: 53.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Equipment excerpt. Full specification upon request. Gooseneck: * Gooseneck in SNT design to optimize the loading area length, approx. 3,750 mm long * Gooseneck hydraulically lift/lowerable and detachable * For tractor units: 6x4 or 8x4 Lowbed: * Lowbed with external beams, extendable in SUPER LOW design, approx. 8,000 mm long * Lowbed with fixed hardwood floor approx. 40 mm thick and mechanical locking * Supply lines are protected within the extendable beams and automatically adjust to the lowbed length * 7 pairs of lashing rings foldable outward (LC 10,000 daN) * 6 pairs of threaded blocks on the inner girder for mounting screw-on RUD rings Rear Undercarriage: * Rear chassis with closed outer frame and checker plate cover * Chassis with excavator trough, closed in the rear half to accommodate air tanks Gjdpfjy Uwu Isx Aqtebn * 3 pairs of lashing rings foldable outward (LC 5,000 daN) * 1 pair of lashing rings foldable outward (LC 10,000 daN) * 1 pair of flat lashing rings, front and rear of the chassis (LC 10,000 daN) Axles: * BPW axles and suspension, all axles hydromechanically forced steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Tyres: * Tyres 245/70 R 17.5 3PMSF – manufacturer of choice. Load index (146/146F) Brake System: * WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: * HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection * Final coating with 2 layers of 2K topcoat, single colour in RAL 3002 Carmine Red as per RAL system 841GL Including accessories: * 2-inch king pin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings on the galvanized connection bar at the front * Remote steering from front and rear via cable remote control with push buttons, including single-track axle control (without installation in the tractor unit) * Prepared for bolt-on container positioning for 1 x 20', 1 x 40', or 1 x 45' container on the outer beams. No container locks * Hydraulic connections from gooseneck to lowbed with multi-coupling instead of screw couplings * Electro-hydraulic power unit * Spiral cable for supplying the electro-hydraulic power unit and/or electric winch (approx. 35 mm², approx. 3.5 m long, max. 250A) between semi-trailer and tractor unit with plug connection (NATO-NATO) * Yellow reflective tape to EU regulations on sides, extension and rear of the trailer * At the gooseneck and rear, left and right, a bracket for warning signs including a socket * Manual and description on USB stick * Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable guard around the pumps * 7 pairs of threaded blocks between the lashing rings under the top flange on the outer beam for mounting screw-on RUD rings VLBG-4 * 2nd ride height, approx. 50 mm above normal ride height, adjustable by hand control * On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear, galvanized plug-in stanchions are removable (body length approx. 2,560 mm) * On the gooseneck, a separate air connection with air gun * 1 stainless steel toolbox, approx. 1,350 x 400 x 400 mm, mounted externally

Durum: ikinci el, boş ağırlık: 10.350 kg, azami yük ağırlığı: 37.650 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2018, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: turuncu, Üretim yılı: 2018, işletme ağırlığı: 10.350 kg, Donanım: ABS,

Durum: ikinci el, azami yük ağırlığı: 36.100 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 10/2024, bir sonraki muayene (TÜV): 10/2026, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete inventory of vehicles, available immediately and at short notice, on our website. Gbjdpfx Aex Uvlloqten Partial list of features. Full equipment details upon request. Gooseneck: * Gooseneck in SNT design for optimized loading deck length, approx. 3,750 mm, hydraulically liftable/lowerable and detachable * Technical kingpin load: 25,000 kg * Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 Lowbed: * Lowbed designed as a telescopic vessel bridge in low-profile construction, extendable at the front with mechanical locking * Length x width approx. 6,850 mm x 2,540 mm * Supply lines run protected in the extendable beams and automatically adjust to the current lowbed length Axles and Suspension: * PENDLE-AXLE * All axles hydro-mechanically forced steered * Hose rupture valve on axle compensation * Cylinders with automatic RESET function * Hydraulic cylinders with shut-off valves and preload pins for securing in raised position * Technical axle load: 12,000 kg each * Hydraulic axle compensation * Tires: 245/70 R 17.5 * Rear chassis with closed external frame, checker plate cover, and continuous prism-shaped excavator recess approx. 1,250/700 x 505 mm, open at the rear Brake System: * Brake system: WABCO EBS-E in accordance with EU regulations, without connecting cables to the tractor unit Paintwork: * Trailer color: RAL 3002 Carmine Red Included Accessories: * Removable steel front wall, approx. 400 mm high * 3 kW electric-hydraulic power pack for hydraulic operations (except hydraulic winches), supply line installation on the tractor unit not included * Outer beams on the gooseneck with mounting holes for bolt-on lashing rings; first hole approx. 200 mm from the front, then every approx. 400 mm; 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear slope of the gooseneck (LC 6,000 daN) * 2" king pin * Locking point approx. every 500 mm on the extension * 1 pair of steel ramps with climbing slats and locking pins for bridging the lowbed receiving hooks * 1 lashing ring each left and right on the front crossmember (LC 10,000 daN) * Lashing rings with retaining spring every approx. 1,200 - 1,300 mm on the outside of the inner beams of the loading deck * Lashing rings with retaining spring every approx. 1,200 - 1,300 mm on the outside of the outer beams of the loading deck (LC 10,000 daN) on the top flange of the outer beams * Cutouts above the lashing rings * 1 hanging lashing ring each left and right outside on the rear crossmember (LC 10,000 daN) on the outer beams of the loading deck * Preparation for removable loading floor * Hanging bar at the front of the rear chassis for loose access ramps to the lowbed * Chassis with beveled rear corners * Hanging bar for loose aluminium ramps on the rear end traverse of the vehicle * Remote steering from front and rear via cable remote control with push-buttons, with axle tracking control, without installation in the tractor unit * Mechanical pin-latch coupling from lowbed to chassis for swapping loading platforms or installing extension beams, with electrical, pneumatic, and hydraulic couplings * Round NATO socket at the front connector bar (Maeler & Kaege VG 96 917) * 2 axle load gauges mounted on the left side Including special accessories: * 1 pair of removable aluminium side walls on the gooseneck, approx. 400 mm high, anodized finish * A

Durum: ikinci el, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2012, toplam uzunluk: 17.800 mm, toplam genişlik: 2.750 mm, süspansiyon: hava, Üretim yılı: 2012, Ek bilgi: Marka: FAYMONVILLE Model: STBZ-4VA + dolly D-2 Yapı: alçak şasi (düşük platform L=8143-13173 mm / G=2750 mm / Y=510 mm) Yıl: 07.2012 Süspansiyon: hava süspansiyonu Frenler: kampana Boyutlar: U/G: 17800 mm / 2750 mm Gsdpfxey Nlc Ae Aqtobn Ağırlıklar: tam/boş: 80000 kg / 22250 kg (dolly hariç) UZATILABİLİR / TÜM AKSLAR DİREKSİYONLU Model yılı: 2012 Süspansiyon tipi: hava süspansiyonu Frenler: kampana Direksiyon: yönlendirilebilir = Daha fazla bilgi = Süspansiyon: hava süspansiyonu Orta aks 1: yönlendirilebilir Orta aks 2: yönlendirilebilir Arka aks: yönlendirilebilir Boş ağırlık: 22.250 kg Taşıma kapasitesi: 57.750 kg Azami yüklü ağırlık (GVW): 80.000 kg

Durum: ikinci el, makine/araç numarası: YAFSR31200001xxxx, Üretim yılı: 2012, Please quote reference number: 23457 Specifications: Model year: 2012 3 axles Length: 1325 cm Net weight: 12,178 kg Gross vehicle weight: 59,000 kg 12-ton axles Steerable on all axles Ready for delivery Description: 2012 Faymonville Telemax flatbed semi-trailer with 27-meter extension. Gbodpfxey T D Sqj Aqten The extension measures 14 meters. Ready for delivery. TÜV: Yes EU-approved until: 28.02.2027 Own weight: 12,178 Total weight: 59,000 Model: Telemax flatbed semi-trailer with 27-meter extension = Further information = Please contact ATS Norway for more information.

Durum: iyi (kullanılmış), makine/araç numarası: YAFTL6002R0035345, yükleme alanı uzunluğu: 14.800 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 9.000 mm, Üretim yılı: 2024, = Diğer seçenekler ve donanımlar = - Arka havalı süspansiyon - Ön havalı süspansiyon Godpfxex Rtiae Aqtsbn - Kampanalı fren sistemi = Diğer bilgiler = Yük kapasitesi: 81.100 kg Azami toplam ağırlık: 81.100 kg Teknik durumu: iyi Görsel durumu: iyi Ön lastik durumu: 60 Ön lastikler: 245/70 R17.5 Arka lastikler: 245/70 R17.5 Son muayene: 2025-12-28 Daha fazla bilgi için Lastas Sales ile iletişime geçiniz.

Durum: iyi (kullanılmış), makine/araç numarası: YAFTL4000J0022411, dingil konfigürasyonu: 3 aks, dingil mesafesi: 8.020 mm, renk: kırmızı, Üretim yılı: 2019, = Diğer seçenekler ve donanımlar = - Arka hava süspansiyonu - Ön hava süspansiyonu - Kampanalı fren sistemi = Diğer bilgiler = Ağırlıklar Boş ağırlık: 15.200 kg Godpfswx Ea Hox Aqtobn Yük kapasitesi: 32.800 kg toplam izin verilen ağırlık: 48.000 kg Durum Teknik durumu: iyi Görsel durumu: iyi Diğer bilgiler Ön lastik durumu: 20 Arka lastik durumu: 20 Ön lastikler: 245-70 R 17.5 Arka lastikler: 245-70 R 17.5 Diğer bilgiler Daha fazla bilgi almak için Lastas Satış ile iletişime geçin.

Durum: yeni, boş ağırlık: 9.600 kg, azami yük ağırlığı: 53.400 kg, toplam ağırlık: 63.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 12.400 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 1.340 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5, renk: gri, Donanım: ABS, Cargo area: - Cargo area with approx. 30 mm thick hardwood floor - 10 pairs of outward-folding lashing rings Landing legs: - JOST landing gear with 2-speed gearbox for 24 t lifting capacity Axles and tyres: - BPW axles, technical capacity 10,000 kg, first axle fixed, all other axles hydraulically/mechanically forced-steered, mounted on a turntable - Air suspension with raise/lower valve - Axle tools - Tyres: 385/65 R22.5 Braking system: - WABCO braking system according to EU regulations with EBS-E (4S3M) Steel construction: - Steel construction made of high-strength fine grain steels - Steel grades: - S355J2+N / S355MC - S690QL / S700MC Electrics: - Electrical system according to EU regulations, 24-volt lighting - ASPÖCK-UNIBOX at the front connection strip, with 24N, 24S & 15-pin sockets - Connection according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Painting: - First-class, durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component zinc dust primer - High-quality single-colour 2-component top coat in Nova grey - Rear section metallized and painted in RAL 9010 Accessories included: - Cargo area with approx. 30 mm thick hardwood floor - 2" king pin - Galvanized steel front wall approx. 1,200 mm high, EN12642-XL Gedpfx Aqorq Dlfetsbn - Yellow-red air couplings at the galvanized front connection strip - 4 wheel chocks with holder at the front wall - Holder for 1,000 mm posts in the rear central beam - At the gooseneck and the rear plate, holders for warning panels including socket, left and right - Remote steering from front and rear by cable remote control with push buttons, including single tracking control for the axles - Electro-hydraulic power unit - White reflective tape according to EU regulations on the sides of the trailer, red at the rear - 12 pairs of posts pockets for 100 x 50 mm plug-in stakes in the side frame of the cargo area - European reflector plates at the rear of the trailer - A holder for a revolving beacon at the rear of the trailer - A mudflap at the rear of the trailer - Manual and description on USB stick - BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable protection around the pump - TPMS tyre pressure monitoring system: - The tractor unit must be capable of receiving and displaying this data in order for correct indication - Lift axle on the front axle controlled via TEBS E depending on current axle load and load condition - Radio remote control for remote steering in addition to cable remote, with indicator lights on the receiver for single tracking control - 5 pairs of crosswise stake pocket strips mounted in the cargo area for 100 x 50 mm plug-in stakes - 80 km/h speed stickers at rear and both sides - Adjustable access ladders mounted on the left and right sides in the direction of travel - 2 reversing lights mounted on the rear plate - Load gauge for axle loads including load diagram - HRM metallization of the side frame: complete steel frame shot-blasted, then the defined visible areas metallized with ZINACOR 850 (85% zinc – 15% aluminium) hot finished

Durum: yeni, boş ağırlık: 9.450 kg, azami yük ağırlığı: 35.550 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.500 mm, yükleme alanı genişliği: 1.560 mm, toplam genişlik: 2.550 mm, lastik boyutu: 385/65 R 22,5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck designed as a loading platform with aluminum chequer plate surface - Front bevel approx. 45° - Hydraulic lifting rocker, lifting and lowering range approx. -280/+250 mm - Two kingpin positions at 2,300 and 2,000 mm - For tractor units: 4x2, 6x2, or 6x4 Loading Bay: - Loading bay, approx. 9,500 mm long, with angle profiles underneath for pallet accommodation (distance kingpin to axle centre approx. 8,000 mm) Axles, Suspension, and Tyres: - BPW stub axles, with drum brakes, independent wheel suspension, hydraulic axle equalisation with lift and lower function - Lowering lock on axles in case of suspension airbag rupture, designed for max. pallet height of 150 mm - Tyres: 385/65 R 22.5 - TPMS tyre pressure monitoring sensors mounted on all wheels including spare wheels - TPMS system in accordance with ECE R 141 Surface Treatment: - Complete steel structure automatically shot-blasted with blast wheel unit after welding - Second blasting with corundum for optimal coating adhesion - HRM metallisation of entire chassis with ZINACOR 850 (85% zinc / 15% aluminium) for optimum corrosion protection - Final coating: 2 coats of 2K topcoat, single colour in Novagrau (DB 7350) - Paint structure tested in salt spray test according to ISO 9227-NSS, cavities sealed with special wax Standard Accessories: - Removable steel front wall, approx. 400 mm high - Tool box with lid recessed at rear of gooseneck, approx. 640 x 700 x 215 mm - Plug-in ALU rear wall on gooseneck, approx. 400 mm high, anodised - One pair foldable ALU side walls on gooseneck, approx. 400 mm high, anodised - 2" kingpin - 3 pairs recessed lashing rings on gooseneck (LC 6,300 daN) - At the front connection rail, yellow-red air couplings, lighting for operating gooseneck, suspension and hydraulic bracing with on/off switch - Mechanical drop tube supports for approx. 48,000 kg support load - Boarding ladder mounted on front right with 2 plug-in handrails - WABCO Roll Stability Support (RSS) - 9 pairs of lashing rings on the longitudinal beams (LC 6,300 daN) - On the longitudinal beams, grating inserts level with guide rails of cargo restraints - Hydraulic pre-installation incl. control unit for mounting 3 pairs of our hydraulic cargo restraints - First and last axle liftable manually left and right - Storage boxes behind the axle unit left and right, splash-proof - Rear taper for easier pallet insertion - Rear cross member with lugs for mechanical bracing - 7-pin socket at the rear cross member - Electro-hydraulic unit - 4 wheel chocks with holder - 2 axle load gauges mounted on the left incl. axle load chart - 3 pairs of hydraulic cargo restraints with swivel arms, slideable on longitudinal beams - Rear door with cross bracing, hinged left, hydraulically locked right, can be latched horizontally at 90°, 105°, and 270° - Fold-up underride guard for transporting up to 4 empty standard pallets - 1 spare wheel Gbodpfxoygvc Hs Aqton - Number plate with bracket incl. lighting, rear left on trailer - Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) - Central lubrication system with 1 pump, BEKAMAX brand, for standard grease

Durum: yeni, boş ağırlık: 12.300 kg, azami yük ağırlığı: 37.200 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R17.5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 30 mm thick hardwood flooring - 3 pairs of lashing rings Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system - Maximum load per pair: 30,000 kg Loading platform: - Loading platform with rear chamfer approx. 1,000 mm x 8° - Approx. 48 mm hardwood flooring, over the axles with checker plate surface Axles and tires: - BPW axles and suspension, two rigid axles, one self-steering axle - Air suspension with lift and lower valve - Self-steering axle with electro-magnetic reverse lockout, activated via reverse gear or manually - Tires 235/75 R17.5 3PMSF Accessories included: - 1 spare wheel with holder - TPMS tire pressure monitoring system according to ECE R 141 - 2" king pin - One galvanized steel headboard Gedpfxotvfkfs Aqtobn - Yellow-red air couplings on the galvanized connection rail at the front - 4 chocks with holders on the headboard - Mounting at the rear of the gooseneck for ALU drive-on ramps - 3 height levels of aluminum planks - Galvanized folding supports under the chamfer of the loading platform - Height-adjustable tarpaulin frame (3,960 mm) - Galvanized headboard with tensioning mechanism for sliding curtain - Height adjustable by approx. 400 mm - Roof brand "EDSCHA" sliding forward on ALU roof rail profiles, bolted to front and rear wall - 3 pairs of sliding stakes in the loading platform - Body rear left and right hydraulically extendable by approx. 750 mm - Sliding roof with pivotable portal beam - Sliding curtain with 700 mm reserve length, with tension belts at spacing approx. 600 mm - Upper edge of structure approx. 3,960 mm high - Driving with open sliding roof is not permitted and will cause damage to the curtain - Cover plates for bridging the gap between ramps and loading platform - Electro-hydraulic unit at the rear, beneath the loading platform - At the gooseneck and at the ramps left and right each a bracket for warning panels incl. socket - Control valves for the ramps positioned on the right trailer side - 6 pairs of stake pockets for insertable stakes 100 x 50 mm in the outer frame of the loading platform - Lift axle at the front axle - Grating surface in the chamfer of the loading platform C40/4 (point load 3.4 t on an area of 20 x 20 cm) - One INOX toolbox 565 x 290 x 810 mm on the right in driving direction between the axles - On the checker plate on the gooseneck and loading platform, a painted sand layer for slip resistance - Central lubrication system BEKAMAX (Pico) with standard lubricant NLGI-2 and removable guard around the pump - Four warning panels extendable by approx. 400 mm, each approx. 423 x 423 mm, with position light - Load pressure gauge for determining axle loads including load chart - HRM metallization (High Resistance Metallization) of the outer frame - Complete steel structure shot-blasted, then visible defined surfaces hot-finished with ZINACOR 850 metallization (zinc 85% - alu 15%)

Durum: yeni, boş ağırlık: 29.600 kg, azami yük ağırlığı: 72.400 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 6.650 mm, yükleme alanı genişliği: 2.840 mm, yükleme alanı yüksekliği: 550 mm, lastik boyutu: 285/70 R19.5, renk: gri, işletme ağırlığı: 29.600 kg, Donanım: ABS, Gooseneck: - Gooseneck hydraulically liftable/lowerable and detachable - Length approx. 3,650 mm - For tractor units: 6 x 4 or 8 x 4 2-Axle Front Bogie: - Hook pick-up at front and rear - Chassis length x chassis width approx. 2,200 mm x 2,850 mm Excavator Deck 'BB-A': Gbedpfx Aqjwcmhaoton - Telescopic excavator deck 'BB-A' with drive-over bridge hooks at the front and bolt-eye coupling at the rear - Length x base width approx. 6,650 mm x 2,850 mm - Beam height x beam width approx. 400 mm x 1,350 mm - Loading height 550 mm with ground clearance 150 mm 4-Axle Rear Bogie: - Mechanical bolt-eye coupling for connecting a low-bed at the front, rear cross member at the back - Bogie length x bogie width approx. 5,480 mm x 2,850 mm - Numerous lashing points Pendulum Axle and Tyres (Front and Rear Bogie): - "PENDULUM AXLE", all axles hydromechanically forced-steered - Burst hose valve on axle compensation cylinders with automatic reset function - Hydraulic cylinders with shut-off valves and locking pins to secure in raised position - Final paint of axles with double-layer 2-component paint in MB 7350 Novagrau, single-color finish - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres: 285/70 R19.5 Remote Steering: - Steering from front and rear via cable remote control with push-buttons, including single-track alignment monitoring - Socket for remote steering operation on the gooseneck - Cable remote control with push-buttons including single-track alignment monitoring Included Accessories: - At the galvanized connection bar at the front: yellow-red air couplings - Steel front wall approx. 400 mm high - 4 wheel chocks - 3.5" kingpin - One 7-pin socket at left and right rear of the gooseneck for warning signs - Support bracket with winch for spare wheel at the front of the gooseneck - Truck hydraulic connection with flow controller (40 l/min), including bracket for suspension of supply lines; tractor unit tank must be at least 80 liters with couplings - Plug-in ALU side and tail boards on the gooseneck, approx. 400 mm high, anodized - Control lever on the gooseneck protected by a fold-down cover - Separate air connection with air gun on the gooseneck - Central lubrication system BEKAMAX, 1x on the gooseneck, 1x on the 2-axle bogie, and 1x on the 4-axle bogie - Variomax tool kit - Multi-coupling hydraulic connections on the gooseneck and in the area of the low-bed hook-up - 2 spare wheels - One 7-pin socket left and right, at the front and rear end of the rear bogie for the warning sign - Front bogie with separate air connection for air tools - Foldable extensions with steel deck inserts, width adjustable from approx. 2,850 mm to approx. 3,250 mm - Steel deck inserts can be placed in 2 positions to create a lowered loading area - Steel mats with 12 mm thick rubber surface - Screw-in option (⌀ 40 mm) every approx. 500 mm on the outside flange of the outer tube of the excavator deck for lashing rings - One locking position every approx. 500 mm at the extension with mechanical lock - Socket for cable remote control of the remote steering at the rear bogie - 2 reversing lights on the rear panel - Four warning signs extendable by approx. 2,000 mm approx. 423 x 423 mm with a position light - 1 work light left/right on the rear panel of the gooseneck with separate on/off switch - Two INOX toolboxes approx. 855 x 340 x 390 mm - 1-cylinder Hatz diesel engine (Silent Pack) - Wireless remote control for the remote steering

Durum: yeni, boş ağırlık: 17.500 kg, azami yük ağırlığı: 43.500 kg, toplam ağırlık: 61.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.550 mm, yükleme alanı genişliği: 2.750 mm, yükleme alanı yüksekliği: 400 mm, lastik boyutu: 245/70 R 17.5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimizing the loading platform length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and removable - For tractor units: 6x4 or 8x4 Lowbed: - Lowbed with external beams, extendable version, “SUPER LOW” design, length approx. 7,550 mm - Lowbed with fixed hardwood floor, approx. 40 mm thick, and mechanical locking - Supply lines routed protected inside the extendable beams and automatically adjust to the respective lowbed length Gbodpfx Aqjh Hm Thston Rear running gear: - Rear running gear with closed outer frame, chequer plate covering, and continuous prism-shaped excavator recess, approx. 1,450/900 x 505 mm, open at rear - 2 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame Axles and tyres: - “PENDLE-AXLE”, all axles forced-steered by hydromechanics - Burst protection valve on axle compensation cylinder with automatic RESET feature - Hydraulic cylinders with shut-off valves and locking pins for securing in raised position - Technical axle load: 12,000 kg - Hydraulic axle compensation - 245/70 R 17.5 tyres / 3PMSF Accessories included: - Prepared for mounting attachable container positions for 1x 20ft or 1x 40ft container on the outer beams - 2'' king pin - One galvanized steel front wall approx. 400 mm high - One spare wheel with bracket - At the galvanized front connection strip: yellow-red air couplings - 4 wheel chocks - Remote steering from front and rear by cable remote control with push buttons, including track alignment monitoring for the axles - Hydraulic couplings from gooseneck to lowbed with multi-coupling system instead of screw couplings - Electro-hydraulic unit - White reflector tape according to EU regulations on the sides, extension, and red at the rear - 2 wooden blocks 500x250x200 mm - European reflector plates (red-yellow) at the rear of the trailer - On the gooseneck and rear panel, left and right, one bracket each for warning panels including socket - Central lubrication system with 2 BEKAMAX (Pico) pumps for NLGI-2 standard grease - Load pressure gauge to determine axle loads, including load chart - On the gooseneck, plug-in ALU side and rear walls approx. 2,000 x 400 mm - The rear galvanized plug-in posts are removable (body length approx. 2,120 mm) - Separate air connection with air gun on the gooseneck - Duomatic air coupling from gooseneck to lowbed - Gooseneck closed at the rear upper section with a removable cover - 1 pair of steel ramps to bridge the mountings of the lowbed - Four extendable warning signs approx. 423 x 423 mm, extendable by approx. 400 mm - Radio remote control for the steering in addition to the cable remote, with indicator lights on receiver for track monitoring - 6 pairs of threaded blocks between lashing rings under the top chord on the outer beam for mounting screwable RUD rings VLBG-4 - 7 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the loading platform - Folding extensions, approx. 230 mm per side - Anti-slip sand layer painted on the loading platform - Dipper recess on the rear running gear closed at the front and rear with plug-in plates - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, then the defined visible surfaces hot-finished with ZINACOR 850 metallization (Zinc 85% - Alu 15%)

Durum: yeni, boş ağırlık: 17.250 kg, azami yük ağırlığı: 48.700 kg, toplam ağırlık: 66.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.550 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 375 mm, lastik boyutu: 245/70 R 17.5, renk: gri, işletme ağırlığı: 17.250 kg, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimized load platform length, approximately 3,750 mm long - Gooseneck hydraulically liftable/lowerable and detachable - Suitable for tractor units: 6 x 4 and 8 x 4 (or 6 x 4 with optional 1-axle dolly) Low bed: - Low bed with external beams, configured as a telescopic vessel bridge in low construction with extension at the front - Length x width approx. 7,550 mm x 2,740 mm - Mechanical locking of the extension Chassis: - Rear chassis with closed outer frame - Tread plate covering and continuous prismatic excavator recess approx. 1,450/900 x 505 mm, open at the rear Axles, Suspension, and Tyres: - “PENDEL-AXLE”, all axles hydromechanically forced steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and locking pins for securing in raised position - Final coating of axles with 2 layers of single-colour 2-component paint in "FAY-Grey-34-0260" - Technical axle load 12,000 kg - Hydraulic axle compensation - 245/70 R 17.5 tyres Accessories: - Detachable steel front wall, approx. 400 mm high - 4 wheel chocks - Gooseneck closed at the rear upper section with a removable cover - 1 pair of steel ramps with climbing strips and fixing bolts for bridging the low bed uptake hooks Gedpoh Hm Tzjfx Aqtjbn - Ramps can be placed over or between the hooks - Mounting points for steel loading ramps at the rear between the external beams of the gooseneck - One locking position approximately every 1,000 mm on the extension - 1 lashing ring each left and right on the front cross member - Supply line connection strip to the tractor unit, fitted at the height of the outer frame profile - 6 pairs of threaded blocks on the outside of the inner beams of the load platform for mounting screw-on M24 rings - 6 pairs of recessed lashing rings on the outside of the outer beams of the load platform, foldable inwards and outwards - 1 pair of threaded blocks at the front and rear of the outer beams of the load platform for mounting screw-on M24 rings - Insertion strip for loose ALU approach ramps on the rear cross member of the vehicle - Central lubrication system with 2 pumps, brand BEKAMAX - Remote steering from front and rear, operable via cable remote control, with single-track control of axles - 3 kW electro-hydraulic power pack for operating hydraulic functions, except hydraulic winches - Removable load floor (galvanised), can be inserted in 3 elements between the outer beams, with hardwood covering - Folding extensions, approx. 230 mm per side - Loose widening boards, framed in steel - 4 warning panels approx. 423 x 423 mm - Radio remote control for remote steering operation - 3.5" kingpin - Anti-slip stickers on the left bevel of the gooseneck - Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings - Guiding plate from gooseneck for the fifth wheel plate, approx. 800 mm wide - 1 spare wheel with mounting adapter - Parking position on the gooseneck for warning panels when not in use - 2 pairs of stanchion pockets recessed in the outer frame of the chassis for insertable stanchions approx. 100 x 50 mm - Rear section of the chassis with a detachable plate closing the bucket arm recess at the rear - Trailer colour MB 7350 Novagrau

Durum: yeni, boş ağırlık: 12.900 kg, azami yük ağırlığı: 34.100 kg, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.850 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 350 mm, süspansiyon: diğer, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 12.900 kg, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading area length, approx. 3,750 mm long - Gooseneck hydraulically height-adjustable and detachable - Technical fifth wheel load: 23,000 kg - Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading Platform: - Low bed with external beams in extendable "SUPER LOW" design, length approx. 6,850 mm - Low bed with fixed hardwood floor approx. 40 mm thick and mechanical locking Rear Chassis: - Rear chassis with closed outer frame, checker plate covering and continuous prismatic excavator trough approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings foldable outward - 1 pair of lashing rings lying in the trough - 2 pairs of stake pockets for plug-in stakes (100 x 50 mm) in the outer frame Pendulum Axle and Tires: - "PENDULUM AXLE", all axles hydromechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-insert to secure in lifted position Gsdpfx Aqjhlz R Sstjbn - Final coating of axles with 2 layers of single-color 2K paint, painted in "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tires 245/70 R17.5 - TPMS (Tire Pressure Monitoring System) compliant with ECE R 141 Accessories: - Prepared for fitting of bolted container locking positions for 1x 20ft or 1x 40ft container on the external beams - 2" kingpin - Galvanized steel front wall approx. 400 mm high - One spare wheel - On the galvanized connection strip at the front: yellow-red air couplings - 4 wheel chocks - Remote steering front and rear operable via cable remote control with push buttons, including single-track monitoring of the axles - Hydraulic connections from gooseneck to low bed with multi-coupling instead of threaded couplings - Electro-hydraulic unit - White reflector tape on sides, extension and rear, according to EU regulations - European reflector panels (red-yellow) at the rear of the trailer - At the gooseneck and rear panel, left and right, each with a bracket for warning signs including socket - 6 pairs of threaded blocks between the lashing rings under the top chord on the outer beam for mounting of bolt-on RUD rings VLBG-4 - Removable ALU side walls and rear wall on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized plug-in posts are removable (body length approx. 2,560 mm) - Gooseneck at the upper rear area closed with a removable cover - 5 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading platform - Fold-out extensions, approx. 230 mm per side - 2 pairs of bolt-on RUD rings VLBG-4 M24 (LC 8,000 daN) - 1 pair of steel ramps for bridging the low bed’s mounting hooks - Sanded layer painted on the loading platform as an anti-slip coating - Speed stickers 80 km/h on rear and both sides - Rear chassis’ bucket recess at the rear closed with a plug-in plate - Four warning panels extendable by approx. 400 mm, size approx. 423 x 423 mm - Radio remote control for the rear steering, in addition to the cable remote control, with indicator lights on the receiver as single-track monitoring - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard grease NLGI-2 - Load gauge for determining axle loads - HRM (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, then all defined visible surfaces hot-finished in metallization with ZINACOR 850 (Zinc 85% - Alu 15%)

Durum: yeni, boş ağırlık: 15.450 kg, azami yük ağırlığı: 65.550 kg, toplam ağırlık: 80.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 21.900 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 925 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, Donanım: ABS, Gooseneck: Gooseneck in SNT design for optimised load platform length, approx. 3,700 mm long, rear section with incline approx. 1,000 mm x 10°. Technical fifth wheel load: 30,000 kg. Compatible with tractor units: 4x2, 6x2, and 6x4. Loading Platform: Double-extendable loading platform, approx. 8,800 mm long with rear incline approx. 500 mm x 10°. A central support beam features a welded-on support table approx. 300 mm wide, with elongated holes at the front and rear for optional bridging elements that can be hooked in and repositioned. Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective platform length. Axles and Tyres: BPW axles and suspension, first axle steered passively, all other axles with hydro-mechanical forced steering. The first axle is equipped with an electro-magnetic reverse lock, activated via reverse gear or manually. Technical axle load: 12,000 kg. Air suspension with lift and lower valve. Manufacturer at our discretion. Sockets and Lighting: 24-volt lighting system in accordance with EU regulations. ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets. Complete HRM metallisation. Entire steel construction shot-blasted, then hot-dip refined with ZINACOR 850. Gbjdpsrigw Rofx Aqtjn Paint Finish: 6-step final treatment: Complete steel structure shot-blasted after welding. One coat of zinc-based primer, one coat of bonding primer. Final paint finish with two layers of single-colour 2-pack paint in DB 7350 Novagrey, followed by cavity sealing with special wax. Accessories: Plug-in steel front wall, approx. 400 mm high. Supply line connection bar to tractor unit, mounted at the height of the outer frame profile. ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets. If your pin configuration differs from ISO standards, please notify us. 3 kW electro-hydraulic power pack for hydraulic operations, excluding hydraulic winches. On the gooseneck, 1 pair of plug-in ALU side walls, approx. 400 mm high, anodised finish. 3.5" kingpin. Gooseneck guide plate for the fifth wheel, approx. 500 mm wide. 2 wheel chocks with mounting bracket in front of the front wall. Mechanical landing legs with 2-speed gearbox and crank. Control valves for hydraulic ramps on the right side of the vehicle. 1 pair of mechanical rear supports. Central lubrication system with 1 pump (BEKAMAX brand) using normal grease (NLGI-2 standard). Removable protection for the central lubrication pump(s). Remote axle steering from the front and rear by cable remote control using push-buttons, with single-track control, without installation in the tractor unit. Under the gooseneck and at the rear end cross-member, left and right, one 7-pin socket with bracket for warning boards. One 7-pin socket at the rear end cross-member. Operating manual and documentation included. One one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm, straight version. Please note that special equipment and accessories will usually increase the unladen weight and accordingly reduce the payload capacity. Warning package: 4 warning boards, approx. 423 x 423 mm, extendable by approx. 1,000 mm, incl. 2 LED position lights and mounting brackets for beacon.

Durum: yeni, boş ağırlık: 34.500 kg, azami yük ağırlığı: 106.700 kg, toplam ağırlık: 141.200 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 7.150 mm, yükleme alanı genişliği: 2.850 mm, yükleme alanı yüksekliği: 580 mm, lastik boyutu: 285/70 R19.5, renk: gri, işletme ağırlığı: 34.500 kg, Donanım: ABS, Gooseneck: - Hydraulic gooseneck, height-adjustable and detachable - Length approx. 3,650 mm - Numerous lashing points - For tractor units: 6x4 or 8x4 3-Axle Compact Front Bogie: - Hook mounts at the front and rear - Bogie length x width: approx. 3,560 mm x 2,850 mm - Numerous lashing points Excavator Deck "BB-A": - Telescopic excavator deck "BB-A" with drive-over bridge hooks at the front and bolt-eye coupling at the rear - Length x base width: approx. 7,150 mm x 2,850 mm - Beam height x width: approx. 430 mm x 1,350 mm - Loading height 580 mm with ground clearance of 150 mm - 5 pairs of drop-forged lashing rings (LC 10,600 daN) - 4 pairs of M30 threaded inserts on the inner beam for mounting bolt-on rings 5-Axle Rear Bogie: - Mechanical bolt-eye coupling for mounting a lowbed at the front, rear cross member at the back - Bogie length x width: approx. 6,840 mm x 2,850 mm - Numerous lashing points Pendulum Axles and Tires (Front and Rear Bogies): - "PENDEL-AXLE", all axles with hydromechanical forced steering Gbedpfxowhywfs Aqton - Hose rupture valve on equalizing cylinder with automatic reset - Hydraulic cylinders with shut-off valves and safety lock pins for securing in raised position - Axles finished with two coats of 2K paint, single-color MB 7350 Novagrau - Technical axle load: 14,640 kg (62 km/h) - Hydraulic axle compensation - Axle tools - Tires: 285/70 R19.5 Remote Steering: - Remote steering operational from front and rear via cable remote control with push-buttons, including axle tracking monitoring - Socket for operating the remote steering on the gooseneck - Cable remote control with push-buttons and axle tracking monitoring included Accessories Included: - Galvanized front connector bar with yellow-red air couplings - Steel front wall approx. 400 mm high - 4 wheel chocks with brackets - 2 spare wheels 285/70 R19.5 - 3.5" king pin - Gantry with winch for spare wheel on the front of the gooseneck - Truck hydraulic connection with flow regulator (40 l/min), including gantry for suspending supply lines; tractor tank must have minimum capacity of 80 liters, complete with couplings - White reflective tape to EU specs on the sides and extensions, red at the rear - Plug-in ALU side and rear panels on the gooseneck, approx. 400 mm high, anodized - Gooseneck operating lever protected by a folding cover - Separate air connection with air gun on the gooseneck - Central lubrication system BEKAMAX with multipurpose grease NLGI-2, 1x at the gooseneck, 1x at the 3-axle bogie, 1x at the 5-axle bogie - Variomax tool kit - Multi-couplings for hydraulics in the area of the lowbed hook mounts - Front bogie with separate air connection for pneumatic tools - Thread inserts (ø 40 mm) every approx. 500 mm on the external upper flange of the excavator deck for bolt-on rings - Foldable extensions with steel decks, adjustable in width from approx. 2,850 mm to 3,250 mm - Steel decks with approx. 12 mm thick rubber surface - Two INOX toolboxes 855 x 340 x 390 mm - Wireless remote control for remote steering in addition to cable control - Slip-resistant sanded surface coating - Single-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery

Durum: yeni, azami yük ağırlığı: 38.800 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5 3PMSF, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with front corners chamfered at 45° and rear bevel approximately 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable Loading Platform: - Extendable loading platform with rear bevel approximately 1,000 mm x 8° - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, over-axle areas with checker plate Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 self-tracking axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear or manually - Air suspension with raise/lower valve - Axle tools - 235/75 R 17.5 3PMSF Brake System: - WABCO braking system complying with EU regulations, with EBS-E (2S2M) Landing Legs: - JOST mechanical landing legs with 2-speed gearbox, 24 t lifting capacity (50 t test load) Accessories Included: - One spare wheel with holder in front of the front wall - 2" kingpin - Galvanised steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanised front connection strip - 4 wheel chocks with holders on the front wall - Bracket for beacon at rear of trailer - Recess at rear of gooseneck for ALU entry ramps - Galvanised folding supports under the loading platform's rear bevel - Cover plates to bridge gap between ramps and loading platform - White reflective tape according to EU regulations on sides, extendable section, and rear in red - Electro-hydraulic unit at the rear, under the loading platform - Brackets for warning signs on both left/right of gooseneck and ramps, with socket - Ramp control valves fitted on right-hand side of trailer - Mudflap at the trailer rear - Manual and documentation on USB stick - ALU side boards and rear wall on gooseneck approx. 2,440 x 400 mm - Rear galvanised plug-in stanchions, removable (superstructure length approx. 2,560 mm) - Four approx. 400 mm extendable warning signs, approx. 423 x 423 mm, each with a position light - 3 pairs of WADER container locks in the loading platform for 20ft, 30ft or 40ft container - 6 pairs of stake pockets 100x50 mm in outer frame of loading platform - Galvanised extendable width extensions, approx. 230 mm per side - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading platform bevel Godeuqlmnepfx Aqtebn - Sanded, painted anti-slip layer on checker plates over kingpin and loading platform - Holder for beacon on warning signs - European reflector boards (red-yellow) at the rear - 80 km/h speed limit stickers on rear and both sides - Load manometer for determining axle loads including load chart - HRM Metallisation (High Resistance Metallisation) of outer frame - Complete steel structure shot-blasted, then defined visible surfaces metallised with ZINACOR 850 (Zinc 85% - Aluminium 15%) hot-finished

Durum: yeni, boş ağırlık: 7.900 kg, azami yük ağırlığı: 41.600 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, işletme ağırlığı: 7.900 kg, Donanım: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Area: - Loading area with rear bevel approx. 1,000 mm x 8° - Recess in the bevel and extending into the loading area for accommodating the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm - Cut-outs in the outer frame of the loading area for attaching tensioning straps - Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Landing Gear: - JOST landing legs (mechanical) with 2-speed gearbox, lifting capacity 24 t (test load 50 t) Axles and Tyres: - BPW axles and suspension, 2 fixed axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with lift and lower valve - TPMS tyre pressure monitoring system as per ECE R 141 - Tyres: 235/75 R 17.5 Paintwork: - Complete steel structure automatically blasted with shot blasting machine after welding - Second blasting with corundum for optimal coating adhesion - Final painting with 2 coats of 2K topcoat, single colour RAL MB 7350 Novagrau - Rims painted silver - Rear section metallised and painted RAL 9010 (Pure White) - Cavities sealed with special wax Electrical System: - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connection bar with sockets: 2 x 7-pin & 1 x 15-pin Accessories Included: - Numerous lashing positions - 2" king pin - One galvanised steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanised front connection bar - 4 wheel chocks with holder on the front wall - Holder at the rear of the gooseneck for ALU loading ramps - Galvanised folding support legs under the rear bevel of the loading area - Holder for rotating beacon at the rear of the trailer - Galvanised, extendable widenings approx. 230 mm per side - White reflective tape to EU regulations on the sides, red at the rear - Holders for warning panels with socket at the gooseneck and rear crossmember, left and right - Removable ALU sideboards and rear board on the gooseneck, approx. 2,440 x 400 mm - Removable rear galvanised stakes - 2 pairs of WADER container pockets in the loading area for a 20ft container - 6 pairs of post pockets (for 100 x 50 mm stakes) in the outer frame of the loading area - Movable mounting bar for ALU loading ramps at the rear of the vehicle - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading area bevel - Anti-slip sand coating applied to checker plates on gooseneck and loading area - Four extendable warning signs, approx. 400 mm extension, size 423 x 423 mm, each with a position light - Bracket for rotating beacon on the warning signs - 80 km/h speed stickers at rear and on both sides Gbedounrapepfx Aqten - European reflector panels (red/yellow) at rear of trailer - Manual and operating instructions on USB stick - HRM metallisation (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then all defined visible surfaces hot-finish metallised with ZINACOR 850 (zinc 85% - alu 15%)

Durum: yeni, boş ağırlık: 12.800 kg, azami yük ağırlığı: 36.200 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.850 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 375 mm, lastik boyutu: 245/70 R 17.5, renk: gri, işletme ağırlığı: 12.800 kg, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimized load bed length, approx. 3,750 mm long - Gooseneck hydraulically lift/lowerable and detachable - Technical fifth wheel load: 25,000 kg - Suitable for tractor units: 4x2, 6x2, and 6x4 Load bed: - Low bed with external beams, designed as a telescopic boiler bridge in low-profile construction with front extension - Length 6,850 mm x width 2,540 mm - One locking point approximately every 1,000 mm on the extension Rear running gear: - Rear running gear with closed outer frame with chequer plate cover and continuous prism-shaped excavator recess approx. 1,250/700 x 505 mm, open at the rear Axles, Suspension, and Tires: - "PENDULUM AXLE", all axles hydro-mechanically steered - Hose rupture valve on axle compensation cylinder with automatic reset function - Hydraulic cylinders with shut-off valves and securing pin for safe retention in raised position - Final coat of axles in 2-layer acrylic paint (2K), single color "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tires: 245/70 R 17.5 - TPMS tire pressure monitoring system according to ECE R 14 - TPMS pressure sensors mounted in all wheels, including spares Included accessories: - Plug-in steel front wall, approx. 400 mm high - 3 kW electro-hydraulic unit for controlling hydraulic functions, except for hydraulic winches - One spare wheel with mounting adapter - Gooseneck outer beams with mounting holes for bolt-on lashing rings - Removable ALU side panels, approx. 400 mm high, anodized, on the gooseneck - One removable ALU rear panel, approx. 400 mm high, anodized, on the gooseneck - Chequer plate cover over the gooseneck - Gooseneck guide plate for the fifth wheel, approx. 500 mm wide - Gooseneck operation lighting with on/off switch - Hydraulic crossbeam to support the gooseneck on the tractor unit or a dolly - 2" king pin - Anti-slip sticker on the left chamfer of the gooseneck - Gooseneck closed at the rear upper area with a removable cover - 4 chocks with holders - Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings - 1 pair of steel ramps with climbing strips and retaining bolts for bridging the reception hooks of the low bed - The ramps can be placed above or between the hooks - Mounting facility for steel drive-on ramps at the rear between the outer beams of the gooseneck - Prepared for bolt-on container supports for 1x20ft on the outer beams - Mechanical pin and strap connection from low bed to running gear for load bed exchange or installation of extension beams - With electro-pneumatic-hydraulic couplings - Outer beams of the low bed with integrated sand coating as anti-slip protection - Removable loading floor (galvanized), can be inserted in 3 elements between the outer beams, with hardwood covering - Folding extensions, approx. 230 mm per side - Hook-in rail at the front of the rear running gear to the low bed for loose approach ramps - 2 pairs of stake pockets recessed in the external frame of the running gear, for plug-in stakes approx. 100 x 50 mm - Hook-in rail for loose ALU approach ramps on the rear cross member of the vehicle - Central lubrication system with 2 pumps - Remote control (radio and cable) - 4 extensible warning signs approx. 423 mm x 423 mm - Extensive lashing positions Gbedpsvy Edcjfx Aqton

Durum: yeni, boş ağırlık: 6.350 kg, azami yük ağırlığı: 38.650 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.540 mm, süspansiyon: hava, lastik boyutu: 385/65 R22,5, Donanım: ABS, Platform: - 2 pairs of external foldable lashing rings (LC 5,000 daN) - 24 pairs of cutouts in the platform’s outer frame for attaching tensioning straps (LC 2,000 daN) Landing Gear: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: - BPW axles, air suspended, with disc brakes (430 mm), with raise/lower function - Tyres: 385/65 R 22.5 Braking System: - WABCO braking system according to EU regulations with EBS-E (2S2M) Paintwork: - Premium, long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer - High-quality 2-component (2K) topcoat in single-tone MB 7350 Novagrau - Rear section metallized and painted in RAL 9010 (pure white) - Metallic paint not possible Gbedoiu Etkspfx Aqton Steel Construction: - Steel construction made of high-strength fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) Electrical System: - Electrical system in accordance with EU regulations - Lighting 24 Volt - ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front terminal strip with sockets 24N, 24S & 15-pin - Wiring according to ISO norms: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Accessories included: - Yellow-red air couplings on the galvanized front terminal strip - 4 wheel chocks with holder - 2" king pin - A galvanized steel front wall approx. 1,600 mm high. EN12642-XL - White reflective tape according to EU regulations on the sides and red on the trailer’s rear - European reflective plates (red-yellow) at the rear of the trailer - Platform with approx. 30 mm thick hardwood floor, fitted in omega profiles - 10 pairs of stake pockets for 100 x 50 mm slot-in stakes in the platform’s outer frame - 3 pairs of transverse stake pocket strips mounted on the platform for 100 x 50 mm slot-in stakes - Storage tray for 1,000 mm slot-in stakes at the rear in the central beam - 1 spare wheel carrier under the platform on the right side (direction of travel) - One mudflap at the rear of the trailer - Manual and documentation on USB stick - One bracket for a rotating beacon at the rear of the trailer - On the gooseneck and rear apron, brackets on both sides for warning signs including socket - 6 pairs of WADER container locks in the platform for 1x 20ft container, 2x 20ft containers, or 1x 40ft container, flush with the rear - 80 km/h speed limit stickers at the rear and on both sides - Four warning signs extendable by approx. 400 mm, each approx. 423 x 423 mm, with LED position light - Load gauge for axle load determination including load chart - HRM Metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then the defined visible surfaces metalized and hot-finished with ZINACOR 850 (zinc 85% - aluminium 15%)

Durum: yeni, boş ağırlık: 8.300 kg, azami yük ağırlığı: 36.700 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 1.080 mm, süspansiyon: hava, lastik boyutu: 385/65 R 22.5, renk: gri, Donanım: ABS, hidrolik arka platform, Loading Area: Loading area, extendable design with pneumatically operated locking mechanism Cut-outs in the outer frame of the loading area for securing straps to be hooked in Landing Gear: JOST landing gear (mechanical) with 2-speed gearbox for 24t lifting capacity Axles and Tyres: BPW axles, air-suspended, with disc brakes (430 mm), equipped with raise/lower function Trailing steering axle with electro-magnetic reversing lock, activated via reverse gear or manually Axle tool kit Tyres: 385/65 R 22.5 Brake System: WABCO brake system compliant with EU regulations, with EBS-E Paintwork: Superior and durable corrosion protection for the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc-rich primer High-quality two-component top coat, single-tone in MB 7350 Novagrau tail section metallized and painted in RAL 9010 Metallic paint not possible Steel Construction: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N / S355MC S690QL / S700MC Electrical System: Electrical system according to EU regulations 24 Volt ASPÖCK-NORDIK lighting ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets Connections according to ISO Accessories Included: Front galvanized connection strip with yellow-red air couplings Galvanized steel front bulkhead approx. 1,600 mm high, EN12642-XL 4 wheel chocks with brackets White reflective tape on the sides, on the extension, and rear red tape according to EU regulations European reflector plates at the rear of the trailer Approx. 30 mm thick hardwood floor, enclosed in omega profiles 10 pairs of stake pockets for 100 x 50 mm insert stakes in the outer frame 1 spare wheel carrier beneath the loading area, right side (in driving direction) Manual and operating instructions Bracket for rotating beacon at the rear of the trailer On the gooseneck and rear plate, left and right: bracket for warning signs including socket outlets Central chassis with painted sand coating as anti-slip protection 6 pairs of WADER container pockets in the loading area: for 1x 20ft container, 2x 20ft containers, or for 1x 40ft container in the extension, an additional locking point is provided for a 45ft container 4 pairs of crosswise stake pocket strips mounted in the loading area, for insert stakes 100 x 50 mm Gedpfx Aqeikyh Hstobn One galvanized crosswise bracket underneath the loading area, 2,390 x 720 x 400 mm Access ladder mounted on the right (in driving direction) Lifting axle on the front axle with TEBS E control, depending on the current axle load and current loading status Load gauge for determining axle loads, including load chart HRM metallization of the outer frame: Complete steel construction blasted, then defined visible areas metallized with ZINACOR 850 hot finish