Kullanılmış Pavelli Alçak Yataklı Yarı Römork Inşaat Makinesi Taşımak Için satın al (20.051)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka
- Alaka
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
Meusburger3-Achs-Tele-Semi-1P. Radmul.-hydr.Rampen
Ara
Durum: yeni, boş ağırlık: 9.800 kg, azami yük ağırlığı: 39.200 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 9.800 kg, Donanım: ABS, Chassis:
- Robust welded steel frame construction with front frame cranking and level loading area with rear chamfer approx. 500x100 mm
- Neck of frame 200 mm with beveled corners at the front
- Slanted end goose neck approx. 500 x 100 mm (traction cleats on outer frame in the area of the rear chamfer)
- 2 kingpin positions with replaceable 2” kingpin
- Outer frame closed to the outside as a perforated outer frame
- Load floor with extendable central frame, extendable by approx. 2,000 mm, lockable pneumatically in 500 mm increments
- Frame in front of and after separation with 80x80 mm step
- Reinforced frame design / point load in retracted state at center of gravity
- Without extendable load area wideners, but prepared for subsequent installation (guide tubes welded into the frame)
- With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting about at the 2nd axle to the rear of the vehicle
- 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm
- Underrun protection = extended end plate
- Drop supports at the rear
Ramps:
- 2 pcs. 2-part special-design drive-on ramps with mechanical extension
- Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting system (only in conjunction with electrohydraulic unit)
- Width approx. 800 mm
- Wooden deck
- Incl. traction cleats on ramps
- Secured in driving position with lashing straps
- Operated via control lever mounted at rear right in FR
- Lateral hydraulic displacement
Floor:
- 35 mm larch timber floor with aluminum omega profiles
Landing Gears:
- Mechanical support legs, 24 t, with single-sided operation and push-balanced
Axles, Steering and Tyres:
- BPW air suspension axles, 10 t axle load each, airbag diameter 360 mm
- S-cam brake 300/200 mm, asbestos-free brake linings
- Automatic slack adjuster
- Lift and lowering device with total stroke approx. 200 mm
- 2nd driving position via ball valve +50mm
- 1st axle lift axle (wired via EBS), automatic actuation with mechanical emergency actuation via button on the trailer
- 3rd axle as friction-steered trailing axle with electric and mechanical lock
- 12 steel disc wheels, 10-hole, center-mount offset
- 12 tyres 245/70 R 17.5 143/141J, tubeless
- Incl. tire pressure monitoring
Accessories:
- Removable side walls and rear wall on the gooseneck, approx. 400 mm high
- Spare wheel carrier
- Lateral aluminum collision protection
- 4 wheel chocks
- 1 ECE board at the rear, plug-in
Fpodpfx Aqexgm S Djtoh
- 11 pairs of ZK modules 10 t side-mounted:
- 2x on the gooseneck
- 2x on the loading area before the extension
- 7x after the extension
- Extendable warning signs including 3 position lamps each, at the front on the landing legs and at the rear in front of the end plate, infinitely extendable up to a loading width of 4,500 mm
- 4 holders for warning panels, plug-in, in stake pockets on loading area
- 6 pairs of stake pockets on the side for plug-in stakes 100x50 mm
- 2 transverse rows of stake pockets for plug-in stakes 100x50 mm on the gooseneck from outer frame to main frame (1x before and 1x after kingpin positions)
- 3 transverse rows of stake pockets for plug-in stakes 100x50 mm on loading area from outer frame to main frame (1x before extension, 1x after extension and 1x after 3rd axle)
- 2 pairs of steel plates on the loading area for container locks to accommodate 1x 20ft container
- Rubber skirt mounted on underrun protection
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 3-Achs-Tele-Semi-Radmu.-Ram.
Ara
Durum: yeni, boş ağırlık: 11.000 kg, azami yük ağırlığı: 38.500 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Gooseneck:
- Gooseneck with rear bevel approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm thick hardwood flooring
Loading Platform:
- Telescopic loading platform with rear chamfer approx. 1,000 mm x 8°
- 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm
- Wheel recesses with 15 x 15 mm square climbing strips and lower section widenings
- Between the 1st and 2nd axle, a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm
Fsdpfxeup U Hze Aqteph
- Recess in the bevel and extending into loading platform for excavator stick approx. 2,900 x 750 x 210/290 mm
- 1 pair of horizontal lashing rings at the front of the platform (LC 10,000 daN)
- 5 pairs of outward-folding lashing rings (LC 5,000 daN)
- 2 pairs of outward-folding lashing rings (LC 10,000 daN)
- 2 pairs of lashing rings in excavator stick recess (LC 5,000 daN)
- Cut-outs in outer frame of loading platform for securing straps (LC 2,000 daN)
- Incl. 3-piece removable galvanized covers over wheel recesses – max. point load 3.5 t / each
Two-Piece Steel Ramps:
- One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm hardwood covering
- Ramp with hydraulically folding ramp sections, hydraulic lifting mechanism, and hydraulically shiftable
Axles and Tyres:
- BPW axles and suspension, 2 rigid axles, 1 self-steering axle
- Technical axle load: 12,000 kg
- Electromagnetic reverse lock activated via reverse gear and manually
- Air suspension with lifting and lowering valve
- Axle tools
- Tyres 235/75 R 17.5
- TPMS tyre pressure monitoring system in accordance with ECE R 141
Accessories Included:
- Brackets for warning panels left and right on gooseneck and rear, incl. socket
- One spare wheel
- 2" kingpin
- One galvanized steel front wall, approx. 400 mm high
- Yellow-red air couplings on galvanized connection rail at front
- 4 wheel chocks
- Galvanized, extendable widenings by approx. 230 mm per side
- Galvanized folding supports under rear bevel of platform
- Bracket for beacon at rear of trailer
- Cover plates to bridge the gap between ramps and platform
- White reflective tape to EU regulations on sides and extension, red at the rear
- Electro-hydraulic unit at rear, under loading platform
- Control valves for ramps positioned on right side of trailer
- European reflector signs (red-yellow) on rear of trailer
- Four extendable warning panels by approx. 400 mm, approx. 423 x 423 mm, with a position light
- Mount for beacon on warning panels
- Removable ALU sideboards and tailgate on gooseneck approx. 2,440 x 400 mm
- Rear galvanized removable stakes (body length approx. 2,560 mm)
- 2 pairs WADER container locks in the loading platform for one 20ft or 30ft container
- 3 pairs of stake pockets for plug-in stanchions 100 x 50 mm on the outer frame of the platform
- One removable galvanized intermediate table with 1 pair WADER container locks
- Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the platform bevel
- Anti-slip coated sand layer on tread plates of gooseneck and platform
- 80 km/h speed limit stickers on the rear and on both sides
- Load gauge for determining axle loads, including load diagram
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
Meusburger3-Achs-Semi 2P. Radmul.-Federhebewerkra.
Ara
Durum: yeni, boş ağırlık: 8.950 kg, azami yük ağırlığı: 40.050 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 8.950 kg, Donanım: ABS, Chassis:
- Robust welded steel frame construction with a cranked front section and level loading area, with rear tapering approx. 500x100 mm
- Neck height 200 mm with chamfered corners
- Tapered end swan-neck approx. 500 x 100 mm (anti-slip ribs on outer frame in area of rear taper)
- 2 king pin positions, replaceable 2" king pin
- Closed outer frame with perforated outer profile for lashing with tension straps
- Reinforced frame design / point load in center of gravity
- Preparations for extendable loading area wideners
- With excavator trough, approx. 220 mm deep, approx. 600 mm wide, extending approx. from after second axle to end of vehicle
- 1 pair of wheel recesses in front of axle with steel covers
- (Covers coated with Körapur), approx. 400 mm deep, and 1 pair of wheel recesses between 1st and 2nd axle with steel covers
- Rear underride guard = extended end plate
- Drop supports at rear
Ramps:
- 2 single-piece aluminum drive-on ramps with spring-assisted lifting function
- Length x width approx. 2,500 mm x 600 mm
- Lockable in transport position using tension straps
- Manually sideways adjustable
Floor:
- 35 mm larch wood floor with aluminum omega profiles
Landing Gears:
- Mechanical 24t landing gears, one-side operation with load compensation
Axles, Steering and Tires:
- BPW air suspension axles, 10t axle load each, air bag diameter 360 mm
- S-cam brake 300/200 mm, asbestos-free brake pads
- Automatic slack adjuster
- Lifting and lowering device, total stroke approx. 200 mm
- 2nd ride height via ball valve +50 mm
- 1st axle with lift function (wired via EBS), fully automatic confirmation with mechanical emergency actuation via push button on trailer
- 3rd axle as friction-steered trailing axle with electrical and mechanical lock
- 12 steel disc wheels, 10-hole, centered offset
- 12 tires 245/70 R 17.5 143/141J, tubeless
- Incl. tire pressure monitoring
Brake System:
- Dual-circuit brake system with EBS-E including RSS
- EBS (WABCO 4S3M)
- Spring-loaded parking brake
- Air connections yellow / red
Painting:
- Steel shot blasting, spray galvanizing of frame and primer
- Painting chassis/wheel hubs/outer frame in DB 7350 Nova Grey
- Plastic parts black, unpainted
- Rims: factory silver
- Reflective tape side and rear in yellow
Accessories:
- Plug-in side and rear boards on the swan neck, approx. 400 mm high
- Spare wheel holder
- Aluminum docking protection
- 4 wheel chocks
- Sheet metal mudguards with Clear-Pass
- Elongated license plate holder in end plate
- 1 plug-in ECE panel at rear
- 11 pairs of ZK modules 10t side:
- 2x on the swan neck
Fodpfowu Agisx Aqtoph
- 9x on the loading platform
- Without rear tow rings
- Extendable warning signs incl. 3 position lights each, front at landing gears and rear before end plate, infinitely extendable up to loading width 4,500 mm
- 4 holders for warning signs, insertable into stake pockets on loading platform
- 6 pairs of stake pockets on the side for insertable stakes 100x50 mm
- 2 rows of transverse stake pockets for insertable stakes 100x50 mm on swan neck from outer frame towards main frame (1x before and 1x after king pin positions)
- 3 rows of transverse stake pockets for insertable stakes 100x50 mm on the loading platform from outer frame towards main frame (1x front, 1x before 1st axle, and 1x after 3rd axle)
- 2 pairs of steel plates in the loading area for container locks to accommodate 1x 20ft container
- Rubber apron mounted on underride guard
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMT 6-2+4-Achs-Tiefbett-Kombination
Ara
Durum: yeni, boş ağırlık: 29.600 kg, azami yük ağırlığı: 72.400 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 6.650 mm, yükleme alanı genişliği: 2.840 mm, yükleme alanı yüksekliği: 550 mm, lastik boyutu: 285/70 R19.5, renk: gri, işletme ağırlığı: 29.600 kg, Donanım: ABS, Gooseneck:
- Gooseneck hydraulically liftable/lowerable and detachable
- Length approx. 3,650 mm
- For tractor units: 6 x 4 or 8 x 4
2-Axle Front Bogie:
- Hook pick-up at front and rear
- Chassis length x chassis width approx. 2,200 mm x 2,850 mm
Excavator Deck 'BB-A':
- Telescopic excavator deck 'BB-A' with drive-over bridge hooks at the front and bolt-eye coupling at the rear
- Length x base width approx. 6,650 mm x 2,850 mm
- Beam height x beam width approx. 400 mm x 1,350 mm
- Loading height 550 mm with ground clearance 150 mm
4-Axle Rear Bogie:
- Mechanical bolt-eye coupling for connecting a low-bed at the front, rear cross member at the back
- Bogie length x bogie width approx. 5,480 mm x 2,850 mm
- Numerous lashing points
Pendulum Axle and Tyres (Front and Rear Bogie):
- "PENDULUM AXLE", all axles hydromechanically forced-steered
- Burst hose valve on axle compensation cylinders with automatic reset function
- Hydraulic cylinders with shut-off valves and locking pins to secure in raised position
- Final paint of axles with double-layer 2-component paint in MB 7350 Novagrau, single-color finish
- Technical axle load: 12,000 kg
- Hydraulic axle compensation
- Tyres: 285/70 R19.5
Remote Steering:
- Steering from front and rear via cable remote control with push-buttons, including single-track alignment monitoring
- Socket for remote steering operation on the gooseneck
- Cable remote control with push-buttons including single-track alignment monitoring
Included Accessories:
- At the galvanized connection bar at the front: yellow-red air couplings
- Steel front wall approx. 400 mm high
- 4 wheel chocks
- 3.5" kingpin
- One 7-pin socket at left and right rear of the gooseneck for warning signs
- Support bracket with winch for spare wheel at the front of the gooseneck
- Truck hydraulic connection with flow controller (40 l/min), including bracket for suspension of supply lines; tractor unit tank must be at least 80 liters with couplings
- Plug-in ALU side and tail boards on the gooseneck, approx. 400 mm high, anodized
- Control lever on the gooseneck protected by a fold-down cover
- Separate air connection with air gun on the gooseneck
- Central lubrication system BEKAMAX, 1x on the gooseneck, 1x on the 2-axle bogie, and 1x on the 4-axle bogie
- Variomax tool kit
- Multi-coupling hydraulic connections on the gooseneck and in the area of the low-bed hook-up
- 2 spare wheels
- One 7-pin socket left and right, at the front and rear end of the rear bogie for the warning sign
- Front bogie with separate air connection for air tools
- Foldable extensions with steel deck inserts, width adjustable from approx. 2,850 mm to approx. 3,250 mm
- Steel deck inserts can be placed in 2 positions to create a lowered loading area
- Steel mats with 12 mm thick rubber surface
- Screw-in option (⌀ 40 mm) every approx. 500 mm on the outside flange of the outer tube of the excavator deck for lashing rings
- One locking position every approx. 500 mm at the extension with mechanical lock
- Socket for cable remote control of the remote steering at the rear bogie
- 2 reversing lights on the rear panel
- Four warning signs extendable by approx. 2,000 mm approx. 423 x 423 mm with a position light
- 1 work light left/right on the rear panel of the gooseneck with separate on/off switch
- Two INOX toolboxes approx. 855 x 340 x 390 mm
- 1-cylinder Hatz diesel engine (Silent Pack)
Fpjdpjwcmhajfx Aqtjh
- Wireless remote control for the remote steering
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 3-A-S-hyd.Ladebo.-hyd.Rampen
Ara
Durum: yeni, boş ağırlık: 10.300 kg, azami yük ağırlığı: 39.200 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, Donanım: ABS, Gooseneck:
- Gooseneck with rear chamfer approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm thick hardwood flooring
Loading Area:
- Loading area after the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8°
- Cut-outs in the outer frame of the loading area for securing tension straps (LC 2,000 daN)
- Hardwood flooring approx. 48 mm thick, chequer plate flooring above the axles
Two-part Steel Ramps:
- One pair of galvanized, two-part steel ramps approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering
- Ramps with hydraulically folding and unfolding ramp sections, hydraulic lifting mechanism, and hydraulically adjustable
- Maximum load per pair: 40,000 kg
Axles, Suspension and Tyres:
- BPW axles and suspension, 2 axles rigid, 1 axle trailing steer
- Technical axle load: 12,000 kg
- Electro-magnetic reverse lock, activated via reverse gear and manually
- Air suspension with lift and lowering valve
- Axle tools
- Tyres 235/75 R 17.5 3PMSF
- TPMS tyre pressure monitoring system according to ECE R 141
Included Accessories:
- One spare wheel with holder in front of the bulkhead
- 2" kingpin
- One galvanized steel front wall approx. 400 mm high
- Yellow-red air couplings at the galvanized connection rail at the front
- 4 wheel chocks
- Galvanized folding supports under the chamfer of the loading area
- One holder for a beacon at the rear of the trailer
- Cover plates to bridge the gap between the ramps and the loading area
- White reflective tape according to EU regulations on the sides of the trailer and red on the rear
- Electro-hydraulic unit at the rear, under the loading area
- Holder for warning signs left and right on the gooseneck and ramps, including socket
- Control valves for the ramps located on the right side of the trailer
- European reflective boards (red-yellow) at the rear of the trailer
- Manual and description on USB stick
- On the gooseneck, ALU drop-in side boards and rear wall approx. 2,440 x 400 mm
- The rear, galvanized drop-in stakes are removable (length of superstructure approx. 2,560 mm)
- An electric cable winch with radio remote control, approx. 5,400 kg lifting force, including 9.5 mm thick steel cable, 24 m long with cable guide roller
- Bolted 5t ring for running the winch cable on the gooseneck without pulley
- 2 pairs of WADER container pockets in the loading area for one 20ft container
- 6 pairs of stake pockets for drop-in stakes 100 x 50 mm in the outer frame of the loading area
- Lift axle on the front axle controlled by TEBS E depending on the current axle load and load status
- 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN)
- 1 pair of recessed lashing rings along the central beam at the rear in the chamfer (LC 10,000 daN)
- On the chequer plates on the gooseneck and the loading area, painted sand layer as slip resistance
- BEKAMAX centralized lubrication system (Pico) with standard grease NLGI-2 and removable guard for the pump
- Four warning boards extendable by approx. 400 mm, size approx. 423 x 423 mm
Fsdpou Hp Hrsfx Aqteph
- 80 km/h speed stickers at the rear and on both sides
- Load gauge to determine axle loads, including load diagram
- HRM metallization (High Resistance Metallization) of the outer frame
- Complete steel structure shot blasted, then defined visible surfaces hot-coated in metallization with ZINACOR 850 (85% zinc - 15% aluminium)
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
Faymonville3-Achs-Semi-hydr.Ladeboden-Rampen-Gitter
Ara
Durum: yeni, boş ağırlık: 10.900 kg, azami yük ağırlığı: 37.100 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 890 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, işletme ağırlığı: 10.900 kg, Donanım: ABS, Gooseneck:
- Gooseneck in SNT design for optimizing the loading platform length, approx. 3,700 mm long, rear with approx. 1,000 mm x 6° chamfer
- Technical fifth wheel load: 18,000 kg
- For tractor units: 4 x 2 and 6 x 2
Loading Platform:
- Loading area, approx. 9,600 mm long, with chamfer at the rear approx. 900 mm x 6°
- Loading area behind the gooseneck hydraulically raiseable and lowerable, approx. 3,000 mm long, loadable up to approx. 9,000 kg
- Grating surface and approx. 5 mm steel plate as additional reinforcement on the chamfered section of the loading area
Ramps:
- One pair of two-piece AXS steel ramps, approx. 4,675 mm long, approx. 900 mm wide
- Grating surface
- Hydraulically folding ramp tips
- Ramps hydraulically adjustable individually approx. 235 mm outwards and approx. 365 mm inwards
- Painted sand coating on the outer frame of the ramp as well as on the ramp tip
- Flashing lights on the outer side of the ramp tips with switch next to the ramp control
- Ramp locking in transport position with quick-release fastener
Axles, Suspension and Tyres:
- BPW axles and suspension, 1st and 2nd axle fixed, 3rd axle self-steering
- 1st axle with starting aid
- Operated via the brake pedal of the tractor unit
- Technical axle load: 12,000 kg
- Air suspension with lift and lower valve
- 235/75 R 17.5
- TPMS tyre pressure monitoring system according to ECE R 141
- TPMS tyre pressure sensors fitted on all wheels including spares
Brake System:
- WABCO EBS-E braking system according to EU regulations
Paintwork:
- Trailer painted MB 7350 Novagrau grey
Accessories Included:
- Plug-in steel front wall, approx. 400 mm high
- 3 kW electric hydraulic power pack for controlling hydraulic operations, except hydraulic winches
- Guide plate from gooseneck for the fifth wheel plate, approx. 500 mm wide
- JOST Module B – static test load = 50,000 kg
- Continuous grating surface with 5 mm steel plate underneath as additional reinforcement
- Painted sand coating
- Cut-outs in the outer frame of the loading platform and lifting bed for attaching hydraulic ramp control valves on the right side of the vehicle
- 2" king pin
- Central lubrication system with one pump, brand BEKAMAX
- On gooseneck, 1 pair of plug-in side ALU folding walls, approx. 400 mm high, anodized
- Electric cable winch, approx. 5,400 kg pulling force, with radio remote control
- Steel rope approx. 24 m long, rope ø approx. 9.5 mm, incl. rope press roller
Fedpfx Aouadk Nsqteph
- WABCO Smart Board system
- 4 extendable warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 3-Achs-Tiefbett mit Pendelachsen
Ara
Durum: yeni, boş ağırlık: 17.500 kg, azami yük ağırlığı: 43.500 kg, toplam ağırlık: 61.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.550 mm, yükleme alanı genişliği: 2.750 mm, yükleme alanı yüksekliği: 400 mm, lastik boyutu: 245/70 R 17.5, renk: gri, Donanım: ABS, Gooseneck:
- Gooseneck in SNT design for optimizing the loading platform length, approx. 3,750 mm long
- Gooseneck hydraulically liftable/lowerable and removable
- For tractor units: 6x4 or 8x4
Lowbed:
- Lowbed with external beams, extendable version, “SUPER LOW” design, length approx. 7,550 mm
- Lowbed with fixed hardwood floor, approx. 40 mm thick, and mechanical locking
- Supply lines routed protected inside the extendable beams and automatically adjust to the respective lowbed length
Rear running gear:
- Rear running gear with closed outer frame, chequer plate covering, and continuous prism-shaped excavator recess, approx. 1,450/900 x 505 mm, open at rear
- 2 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame
Axles and tyres:
- “PENDLE-AXLE”, all axles forced-steered by hydromechanics
- Burst protection valve on axle compensation cylinder with automatic RESET feature
- Hydraulic cylinders with shut-off valves and locking pins for securing in raised position
- Technical axle load: 12,000 kg
- Hydraulic axle compensation
- 245/70 R 17.5 tyres / 3PMSF
Accessories included:
- Prepared for mounting attachable container positions for 1x 20ft or 1x 40ft container on the outer beams
- 2'' king pin
- One galvanized steel front wall approx. 400 mm high
- One spare wheel with bracket
- At the galvanized front connection strip: yellow-red air couplings
- 4 wheel chocks
- Remote steering from front and rear by cable remote control with push buttons, including track alignment monitoring for the axles
- Hydraulic couplings from gooseneck to lowbed with multi-coupling system instead of screw couplings
- Electro-hydraulic unit
- White reflector tape according to EU regulations on the sides, extension, and red at the rear
- 2 wooden blocks 500x250x200 mm
- European reflector plates (red-yellow) at the rear of the trailer
- On the gooseneck and rear panel, left and right, one bracket each for warning panels including socket
- Central lubrication system with 2 BEKAMAX (Pico) pumps for NLGI-2 standard grease
- Load pressure gauge to determine axle loads, including load chart
- On the gooseneck, plug-in ALU side and rear walls approx. 2,000 x 400 mm
- The rear galvanized plug-in posts are removable (body length approx. 2,120 mm)
- Separate air connection with air gun on the gooseneck
- Duomatic air coupling from gooseneck to lowbed
- Gooseneck closed at the rear upper section with a removable cover
- 1 pair of steel ramps to bridge the mountings of the lowbed
- Four extendable warning signs approx. 423 x 423 mm, extendable by approx. 400 mm
- Radio remote control for the steering in addition to the cable remote, with indicator lights on receiver for track monitoring
Fpsdpsh Hm Thsfx Aqtoh
- 6 pairs of threaded blocks between lashing rings under the top chord on the outer beam for mounting screwable RUD rings VLBG-4
- 7 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the loading platform
- Folding extensions, approx. 230 mm per side
- Anti-slip sand layer painted on the loading platform
- Dipper recess on the rear running gear closed at the front and rear with plug-in plates
- HRM metallization (High Resistance Metallisation) of the outer frame
- Complete steel construction shot-blasted, then the defined visible surfaces hot-finished with ZINACOR 850 metallization (Zinc 85% - Alu 15%)
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 4-Achs-Jumbo-Semi mit Plane
Ara
Durum: yeni, azami yük ağırlığı: 38.100 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 13.100 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 760 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5 3PMSF, renk: gri, Donanım: ABS, Gooseneck:
Gooseneck with rear chamfer approx. 750 mm x 10°
3 pairs of lashing rings
30 mm thick hardwood flooring
Loading Platform:
5 pairs of fold-out lashing rings on the outside
3 pairs of fold-out lashing rings on the outside
1 pair of horizontal lashing rings at the front end of the platform
Cut-outs in the outer frame of the loading platform for attaching tension straps
Approx. 48 mm thick hardwood flooring, checker plate flooring above the axles
Landing Gears:
JOST landing legs with 2-speed gearbox, lifting capacity 24 t
Axles and Tyres:
BPW axles, two fixed axles, two steered trailing axles, air suspension, drum brakes, raise/lower function
Trailing steering axles with electro-magnetic reverse lock, activated via reverse gear or manually
Axle tool
Tyres 205/65 R17.5 3PMSF
Brake System:
WABCO brake system according to EU regulations, with EBS-E
Steel Construction:
High-strength fine-grained steel construction
Steel Grades:
S355J2+N/S355MC
S690QL/S700MC
Electrical Equipment:
Electrical system according to EU regulations, lighting: 24 Volt ASPÖCK-NORDIK
ASPÖCK-UNIBOX at the front connection panel, with 24N, 24S & 15 pin sockets
Connections according to ISO
Paintwork:
First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by 2-component zinc-dust primer
Premium 2-component topcoat, single colour in MB 7350 Novagrau
Fedpjtphtmefx Aqteph
No metallic finish possible
Rear section metallized and painted RAL 9010
Accessories Included:
1 spare wheel 205/65 R 17.5
TPMS tyre pressure monitoring system according to ECE R 141
Galvanized front connection bar with yellow-red air couplings
4 chocks with holder at the front wall
Mounting at rear of gooseneck for ALU loading ramps
Galvanized folding supports under the loading platform’s rear chamfer
Holder for a warning beacon at the rear of the trailer
Height-adjustable tarpaulin superstructure
Galvanized front wall with tensioning mechanism for sliding curtains
Height-adjustable by approx. 400 mm
Roof brand "EDSCHA" sliding forward on ALU roof support profiles, screwed front and rear walls
On platform: 3 pairs of adjustable stanchions
Rear of superstructure can be hydraulically widened left and right by approx. 750 mm
Sliding roof with upward swinging portal beam
Sliding tarpaulin with 700 mm length reserve, securing straps at approx. 600 mm intervals
Height upper edge of superstructure approx. 3,960 mm
Driving with open sliding roof is not permitted and will damage the tarpaulin
Suspension rail for ALU loading ramps at the rear of the vehicle
At the gooseneck and at the left and right rear panel: each with a bracket for warning boards including socket
Mudflap at the rear of the trailer
European reflector boards at the rear of the trailer
7 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform
Lift axle on the front axle with TEBS E control, depending on current axle load and loading status
Rear of superstructure with closed ALU wing doors
Anti-slip sand finish painted on checker plates on gooseneck and platform
Central lubrication system BEKAMAX, standard grease NLGI-2, removable protective cover for pump
80 km/h speed sticker at rear and on both sides
Load gauge for axle load determination including load chart
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FAYMONVILLE5-Achs-Doppel-Tele-Semi-Sattelauflieger
Ara
Durum: yeni, boş ağırlık: 15.450 kg, azami yük ağırlığı: 65.550 kg, toplam ağırlık: 80.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 21.900 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 925 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, Donanım: ABS, Gooseneck:
Gooseneck in SNT design for optimised load platform length, approx. 3,700 mm long, rear section with incline approx. 1,000 mm x 10°. Technical fifth wheel load: 30,000 kg. Compatible with tractor units: 4x2, 6x2, and 6x4.
Loading Platform:
Double-extendable loading platform, approx. 8,800 mm long with rear incline approx. 500 mm x 10°. A central support beam features a welded-on support table approx. 300 mm wide, with elongated holes at the front and rear for optional bridging elements that can be hooked in and repositioned.
Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective platform length.
Fpodpfx Aqsrigw Rjtoh
Axles and Tyres:
BPW axles and suspension, first axle steered passively, all other axles with hydro-mechanical forced steering. The first axle is equipped with an electro-magnetic reverse lock, activated via reverse gear or manually. Technical axle load: 12,000 kg. Air suspension with lift and lower valve. Manufacturer at our discretion.
Sockets and Lighting:
24-volt lighting system in accordance with EU regulations. ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets. Complete HRM metallisation. Entire steel construction shot-blasted, then hot-dip refined with ZINACOR 850.
Paint Finish:
6-step final treatment: Complete steel structure shot-blasted after welding. One coat of zinc-based primer, one coat of bonding primer. Final paint finish with two layers of single-colour 2-pack paint in DB 7350 Novagrey, followed by cavity sealing with special wax.
Accessories:
Plug-in steel front wall, approx. 400 mm high. Supply line connection bar to tractor unit, mounted at the height of the outer frame profile. ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets. If your pin configuration differs from ISO standards, please notify us.
3 kW electro-hydraulic power pack for hydraulic operations, excluding hydraulic winches. On the gooseneck, 1 pair of plug-in ALU side walls, approx. 400 mm high, anodised finish. 3.5" kingpin. Gooseneck guide plate for the fifth wheel, approx. 500 mm wide.
2 wheel chocks with mounting bracket in front of the front wall. Mechanical landing legs with 2-speed gearbox and crank. Control valves for hydraulic ramps on the right side of the vehicle.
1 pair of mechanical rear supports. Central lubrication system with 1 pump (BEKAMAX brand) using normal grease (NLGI-2 standard).
Removable protection for the central lubrication pump(s). Remote axle steering from the front and rear by cable remote control using push-buttons, with single-track control, without installation in the tractor unit.
Under the gooseneck and at the rear end cross-member, left and right, one 7-pin socket with bracket for warning boards. One 7-pin socket at the rear end cross-member. Operating manual and documentation included.
One one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm, straight version.
Please note that special equipment and accessories will usually increase the unladen weight and accordingly reduce the payload capacity.
Warning package: 4 warning boards, approx. 423 x 423 mm, extendable by approx. 1,000 mm, incl. 2 LED position lights and mounting brackets for beacon.
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 8-(3+5)-Achs-Tiefbett-Kombi.
Ara
Durum: yeni, boş ağırlık: 34.500 kg, azami yük ağırlığı: 106.700 kg, toplam ağırlık: 141.200 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 7.150 mm, yükleme alanı genişliği: 2.850 mm, yükleme alanı yüksekliği: 580 mm, lastik boyutu: 285/70 R19.5, renk: gri, işletme ağırlığı: 34.500 kg, Donanım: ABS, Gooseneck:
- Hydraulic gooseneck, height-adjustable and detachable
- Length approx. 3,650 mm
- Numerous lashing points
- For tractor units: 6x4 or 8x4
3-Axle Compact Front Bogie:
- Hook mounts at the front and rear
- Bogie length x width: approx. 3,560 mm x 2,850 mm
- Numerous lashing points
Excavator Deck "BB-A":
- Telescopic excavator deck "BB-A" with drive-over bridge hooks at the front and bolt-eye coupling at the rear
- Length x base width: approx. 7,150 mm x 2,850 mm
- Beam height x width: approx. 430 mm x 1,350 mm
- Loading height 580 mm with ground clearance of 150 mm
- 5 pairs of drop-forged lashing rings (LC 10,600 daN)
- 4 pairs of M30 threaded inserts on the inner beam for mounting bolt-on rings
5-Axle Rear Bogie:
- Mechanical bolt-eye coupling for mounting a lowbed at the front, rear cross member at the back
- Bogie length x width: approx. 6,840 mm x 2,850 mm
- Numerous lashing points
Pendulum Axles and Tires (Front and Rear Bogies):
- "PENDEL-AXLE", all axles with hydromechanical forced steering
- Hose rupture valve on equalizing cylinder with automatic reset
- Hydraulic cylinders with shut-off valves and safety lock pins for securing in raised position
- Axles finished with two coats of 2K paint, single-color MB 7350 Novagrau
- Technical axle load: 14,640 kg (62 km/h)
- Hydraulic axle compensation
- Axle tools
- Tires: 285/70 R19.5
Remote Steering:
- Remote steering operational from front and rear via cable remote control with push-buttons, including axle tracking monitoring
- Socket for operating the remote steering on the gooseneck
- Cable remote control with push-buttons and axle tracking monitoring included
Accessories Included:
- Galvanized front connector bar with yellow-red air couplings
- Steel front wall approx. 400 mm high
- 4 wheel chocks with brackets
- 2 spare wheels 285/70 R19.5
- 3.5" king pin
Fsdpfxswhywfe Aqteph
- Gantry with winch for spare wheel on the front of the gooseneck
- Truck hydraulic connection with flow regulator (40 l/min), including gantry for suspending supply lines; tractor tank must have minimum capacity of 80 liters, complete with couplings
- White reflective tape to EU specs on the sides and extensions, red at the rear
- Plug-in ALU side and rear panels on the gooseneck, approx. 400 mm high, anodized
- Gooseneck operating lever protected by a folding cover
- Separate air connection with air gun on the gooseneck
- Central lubrication system BEKAMAX with multipurpose grease NLGI-2, 1x at the gooseneck, 1x at the 3-axle bogie, 1x at the 5-axle bogie
- Variomax tool kit
- Multi-couplings for hydraulics in the area of the lowbed hook mounts
- Front bogie with separate air connection for pneumatic tools
- Thread inserts (ø 40 mm) every approx. 500 mm on the external upper flange of the excavator deck for bolt-on rings
- Foldable extensions with steel decks, adjustable in width from approx. 2,850 mm to 3,250 mm
- Steel decks with approx. 12 mm thick rubber surface
- Two INOX toolboxes 855 x 340 x 390 mm
- Wireless remote control for remote steering in addition to cable control
- Slip-resistant sanded surface coating
- Single-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
Meusburger3-Achs-Semi mit 2 Paar Radmulden
Ara
Durum: yeni, boş ağırlık: 8.490 kg, azami yük ağırlığı: 40.510 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 8.490 kg, Donanım: ABS, Chassis:
- Robust welded steel frame construction with front frame drop and level loading area, rear taper approx. 500x100 mm
- Neck height 200 mm with beveled corners
- Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area of the rear taper)
- 2 king pin positions with interchangeable 2” king pin
- Outer frame closed on the outside as a perforated outer frame for lashing with tie-down straps
- Reinforced frame design / point load at the center of gravity
- Prepared for extendable load width extensions
- With excavator recess (open type), depth approx. 220 mm, width approx. 600 mm, beginning just after 2nd axle to end of vehicle
- 1 pair of wheel recesses in front of axle with steel covers
- (Covers with Körapur coating), depth approx. 400 mm, as well as 1 pair of wheel recesses between 1st and 2nd axle with steel covers
- Rear underrun protection = extended end plate
- Drop-leg stabilizers at rear
Floor:
- 35 mm larch wood floor with aluminum omega profiles
Axles, Steering, and Tires:
- BPW air suspension axles, each with 10 t axle load, air bellow diameter 360 mm
- S-cam brakes 300/200 mm, asbestos-free brake linings
- Automatic slack adjuster
- Lift and lowering mechanism, total travel approx. 200 mm
- 2nd ride height setting via ball valve +50 mm
- 1st axle lift axle (wired via EBS), confirmation fully automatic with mechanical emergency operation via pushbutton on trailer
- 3rd axle is a friction-steered trailing axle with electric and mechanical lock
- 12 steel disc wheels, 10-hole, with centered offset
- 12 tires 245/70 R 17.5 143/141J, tubeless
- Including tire pressure monitoring
Fodpowu A Slsfx Aqteph
Brake System:
- Dual-line brake system with EBS-E including RSS
- EBS (WABCO 4S3M)
- Spring-loaded parking brake
- Air connections yellow / red
Paintwork:
- Steel shot blasting, chassis spray galvanizing and priming
- Painting of chassis/hub/outer frame in DB 7350 Novagrau
Accessories:
- Removable drop sides and tailboard on gooseneck, approx. 400 mm high
- Spare wheel holder
- Side aluminum underrun protection
- 4 wheel chocks
- Metal mudguards with Clear-Pass
- Long number plate holder integrated in end plate
- 1 removable ECE plate at rear
- 11 pairs of ZK-modules 10t side-mounted:
- 2x on the gooseneck
- 9x on the loading area
- Without rear towing eyes
- Extendable warning signs incl. 3 position lamps each, at the front at landing gear and rear before end plate, infinitely extendable to a loading width of 4,500 mm
- 4 holders for warning signs, insertable in stake pockets on loading area
- 6 pairs of side stake pockets for insertable stanchions 100x50 mm
- 2 cross rows of stake pockets for insertable stanchions 100x50 mm on gooseneck, from outer frame to main frame (1x before and 1x after king pin positions)
- 3 cross rows of stake pockets for insertable stanchions 100x50 mm on loading area, from outer frame to main frame (1x at the front area, 1x before 1st axle, 1x after 3rd axle)
- 2 pairs of steel plates in loading area for container locks to accommodate one 20ft container
- Rubber apron mounted on underrun protection
- Preparation (wiring for NATO cable and hole pattern for retrofit installation of NATO socket at front of end plate and bracket on vehicle) for subsequent installation of an electrohydraulic unit on the right rear side for possible ramp operation
- Mechanical landing legs 24t, single-sided operation with load compensation
Optionally, the trailer is available with aluminum approach ramp
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 4-Achs-Mega-Tele-Semi-niedri
Ara
Durum: yeni, boş ağırlık: 10.600 kg, azami yük ağırlığı: 39.400 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 760 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5, renk: gri, işletme ağırlığı: 10.600 kg, Donanım: ABS, Swan-neck:
- Swan-neck with 30 mm thick hardwood flooring
- Swan-neck at the rear in straight design
- 3 pairs of lashing rings (LC 5,000 daN)
Extendable loading platform:
Fsdpfot Ag Uwex Aqtoph
- Loading platform in extendable version
- 5 pairs of fold-out lashing rings
- 3 pairs of fold-out lashing rings
- 1 pair of horizontal lashing rings at the front of the loading platform
- Cut-outs in the outer frame of the loading platform for attaching tension belts
- Hardwood flooring approx. 48 mm thick, checker plate covering above the axles
Landing legs:
- JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load)
Axles and tyres:
- BPW axles, two fixed and two steering axles
- Air suspension, drum brakes, with lift/lower function
- The steering axles can be locked electro-magnetically via reverse gear or manually
- Axle tools
- Tyres: 205/65 R17.5
Brake system:
- Brake system according to EU regulations with EBS-E (4S3M)
Steel construction:
- Steel structure made of high-strength fine-grain steels
- Steel grades:
- S355J2+N/S355MC (yield strength 355 MPa)
- S690QL/S700MC (yield strength 690 MPa)
Electrical system:
- Electrical system according to EU regulations, 24 volt lighting, ASPÖCK-NORDIK (ASS3)
- ASPÖCK-UNIBOX at the front connection strip, with 24N, 24S & 15-pin sockets
- Connections according to ISO:
- 24N ISO-1185
- 24S ISO-3731
- 15-pin ISO-12098
Paintwork:
- First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer
- High-quality 2-component (2K) top coat, single colour in Nova grey
- Rear section metallized and painted in RAL 9010 (pure white)
Included accessories:
- One spare wheel with holder located in front of the bulkhead
- 2" king pin
- Galvanized steel front wall approx. 400 mm high
- Yellow-red air couplings on the front galvanized connection strip
- 4 wheel chocks with holder at the bulkhead
- Galvanized folding supports under the sloped part of the loading platform
- Holder for rotating beacon at the rear of the trailer
- Galvanized, extendable width extensions approx. 230 mm per side
- White reflective tape according to EU regulations on sides, at extension section, and red at rear
- On swan-neck and rear panel: one mount each for warning panels including socket (left and right)
- European reflective warning boards (red-yellow) at the rear of the trailer
- TPMS tyre pressure monitoring system in accordance with ECE R 141
- On the swan-neck: removable ALU side panels and tailboard approx. 2,440 x 400 mm
- The rear, galvanized stanchions are removable (length of superstructure approx. 2,560 mm)
- 7 pairs of WADER container locks
- 1x 20ft container on the loading platform; 1x 40ft container on the loading platform; 1x 40ft container over the swan-neck; 2x 20ft containers
- 7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the loading platform
- Lift axle at the front axle, controlled by TEBS E in relation to current axle load and loading status
- Sliding hook-in rail for ALU loading ramps at the rear of the vehicle
- Sanded, anti-slip coating painted onto checker plate on swan-neck and loading platform
- Four warning panels extendable by approx. 400 mm each, approx. 423 x 423 mm, with a position lamp
- Mount for rotating beacon on warning panels
- Speed stickers 80 km/h at the rear and on both sides
- Load gauge to determine axle loads, including load chart
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 3-Achs-Tele-Semi-nachlaufg.
Ara
Durum: yeni, azami yük ağırlığı: 38.800 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5 3PMSF, renk: gri, Donanım: ABS, Gooseneck:
- Gooseneck with front corners chamfered at 45° and rear bevel approximately 750 mm x 10°
Fpsdouqlmnjpfx Aqteh
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm thick hardwood flooring
Extendable Loading Platform:
- Extendable loading platform with rear bevel approximately 1,000 mm x 8°
- 6 pairs of outward-folding lashing rings (LC 5,000 daN)
- 3 pairs of outward-folding lashing rings (LC 10,000 daN)
- 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN)
- Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN)
- Approx. 48 mm thick hardwood flooring, over-axle areas with checker plate
Axles and Tyres:
- BPW axles and suspension, 2 rigid axles, 1 self-tracking axle
- Technical axle load: 12,000 kg
- Electromagnetic reversing lock, activated via reverse gear or manually
- Air suspension with raise/lower valve
- Axle tools
- 235/75 R 17.5 3PMSF
Brake System:
- WABCO braking system complying with EU regulations, with EBS-E (2S2M)
Landing Legs:
- JOST mechanical landing legs with 2-speed gearbox, 24 t lifting capacity (50 t test load)
Accessories Included:
- One spare wheel with holder in front of the front wall
- 2" kingpin
- Galvanised steel front wall, approx. 400 mm high
- Yellow-red air couplings on the galvanised front connection strip
- 4 wheel chocks with holders on the front wall
- Bracket for beacon at rear of trailer
- Recess at rear of gooseneck for ALU entry ramps
- Galvanised folding supports under the loading platform's rear bevel
- Cover plates to bridge gap between ramps and loading platform
- White reflective tape according to EU regulations on sides, extendable section, and rear in red
- Electro-hydraulic unit at the rear, under the loading platform
- Brackets for warning signs on both left/right of gooseneck and ramps, with socket
- Ramp control valves fitted on right-hand side of trailer
- Mudflap at the trailer rear
- Manual and documentation on USB stick
- ALU side boards and rear wall on gooseneck approx. 2,440 x 400 mm
- Rear galvanised plug-in stanchions, removable (superstructure length approx. 2,560 mm)
- Four approx. 400 mm extendable warning signs, approx. 423 x 423 mm, each with a position light
- 3 pairs of WADER container locks in the loading platform for 20ft, 30ft or 40ft container
- 6 pairs of stake pockets 100x50 mm in outer frame of loading platform
- Galvanised extendable width extensions, approx. 230 mm per side
- 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading platform bevel
- Sanded, painted anti-slip layer on checker plates over kingpin and loading platform
- Holder for beacon on warning signs
- European reflector boards (red-yellow) at the rear
- 80 km/h speed limit stickers on rear and both sides
- Load manometer for determining axle loads including load chart
- HRM Metallisation (High Resistance Metallisation) of outer frame
- Complete steel structure shot-blasted, then defined visible surfaces metallised with ZINACOR 850 (Zinc 85% - Aluminium 15%) hot-finished
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 3-Achs-Semi-nachlaufgelenkt
Ara
Durum: yeni, boş ağırlık: 7.900 kg, azami yük ağırlığı: 41.600 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, işletme ağırlığı: 7.900 kg, Donanım: ABS, Gooseneck:
- Gooseneck with rear bevel approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm thick hardwood flooring
Loading Area:
- Loading area with rear bevel approx. 1,000 mm x 8°
- Recess in the bevel and extending into the loading area for accommodating the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm
- Cut-outs in the outer frame of the loading area for attaching tensioning straps
- Approx. 48 mm thick hardwood flooring, checker plate covering above the axles
Landing Gear:
- JOST landing legs (mechanical) with 2-speed gearbox, lifting capacity 24 t (test load 50 t)
Axles and Tyres:
- BPW axles and suspension, 2 fixed axles, 1 self-steering axle
- Technical axle load: 12,000 kg
- Electromagnetic reversing lock, activated via reverse gear and manually
- Air suspension with lift and lower valve
- TPMS tyre pressure monitoring system as per ECE R 141
- Tyres: 235/75 R 17.5
Paintwork:
- Complete steel structure automatically blasted with shot blasting machine after welding
- Second blasting with corundum for optimal coating adhesion
- Final painting with 2 coats of 2K topcoat, single colour RAL MB 7350 Novagrau
- Rims painted silver
- Rear section metallised and painted RAL 9010 (Pure White)
- Cavities sealed with special wax
Electrical System:
- Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
- ASPÖCK-UNIBOX on the front connection bar with sockets: 2 x 7-pin & 1 x 15-pin
Accessories Included:
- Numerous lashing positions
- 2" king pin
- One galvanised steel front wall, approx. 400 mm high
Fodpfx Aqounrapjtoph
- Yellow-red air couplings on the galvanised front connection bar
- 4 wheel chocks with holder on the front wall
- Holder at the rear of the gooseneck for ALU loading ramps
- Galvanised folding support legs under the rear bevel of the loading area
- Holder for rotating beacon at the rear of the trailer
- Galvanised, extendable widenings approx. 230 mm per side
- White reflective tape to EU regulations on the sides, red at the rear
- Holders for warning panels with socket at the gooseneck and rear crossmember, left and right
- Removable ALU sideboards and rear board on the gooseneck, approx. 2,440 x 400 mm
- Removable rear galvanised stakes
- 2 pairs of WADER container pockets in the loading area for a 20ft container
- 6 pairs of post pockets (for 100 x 50 mm stakes) in the outer frame of the loading area
- Movable mounting bar for ALU loading ramps at the rear of the vehicle
- 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading area bevel
- Anti-slip sand coating applied to checker plates on gooseneck and loading area
- Four extendable warning signs, approx. 400 mm extension, size 423 x 423 mm, each with a position light
- Bracket for rotating beacon on the warning signs
- 80 km/h speed stickers at rear and on both sides
- European reflector panels (red/yellow) at rear of trailer
- Manual and operating instructions on USB stick
- HRM metallisation (High Resistance Metallisation) of the outer frame
- Complete steel structure shot-blasted, then all defined visible surfaces hot-finish metallised with ZINACOR 850 (zinc 85% - alu 15%)
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
Faymonville2-Achs-Tiefbett-Pendelach.-Bolzen-Lasch.
Ara
Durum: yeni, boş ağırlık: 12.800 kg, azami yük ağırlığı: 36.200 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.850 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 375 mm, lastik boyutu: 245/70 R 17.5, renk: gri, işletme ağırlığı: 12.800 kg, Donanım: ABS, Gooseneck:
- Gooseneck in SNT design for optimized load bed length, approx. 3,750 mm long
- Gooseneck hydraulically lift/lowerable and detachable
- Technical fifth wheel load: 25,000 kg
- Suitable for tractor units: 4x2, 6x2, and 6x4
Load bed:
- Low bed with external beams, designed as a telescopic boiler bridge in low-profile construction with front extension
- Length 6,850 mm x width 2,540 mm
- One locking point approximately every 1,000 mm on the extension
Rear running gear:
- Rear running gear with closed outer frame with chequer plate cover and continuous prism-shaped excavator recess approx. 1,250/700 x 505 mm, open at the rear
Axles, Suspension, and Tires:
- "PENDULUM AXLE", all axles hydro-mechanically steered
- Hose rupture valve on axle compensation cylinder with automatic reset function
- Hydraulic cylinders with shut-off valves and securing pin for safe retention in raised position
- Final coat of axles in 2-layer acrylic paint (2K), single color "FAY-Grey-34-0260"
- Technical axle load: 12,000 kg
- Hydraulic axle compensation
- Tires: 245/70 R 17.5
- TPMS tire pressure monitoring system according to ECE R 14
- TPMS pressure sensors mounted in all wheels, including spares
Included accessories:
- Plug-in steel front wall, approx. 400 mm high
- 3 kW electro-hydraulic unit for controlling hydraulic functions, except for hydraulic winches
Fpodpfsvy Edcjx Aqteh
- One spare wheel with mounting adapter
- Gooseneck outer beams with mounting holes for bolt-on lashing rings
- Removable ALU side panels, approx. 400 mm high, anodized, on the gooseneck
- One removable ALU rear panel, approx. 400 mm high, anodized, on the gooseneck
- Chequer plate cover over the gooseneck
- Gooseneck guide plate for the fifth wheel, approx. 500 mm wide
- Gooseneck operation lighting with on/off switch
- Hydraulic crossbeam to support the gooseneck on the tractor unit or a dolly
- 2" king pin
- Anti-slip sticker on the left chamfer of the gooseneck
- Gooseneck closed at the rear upper area with a removable cover
- 4 chocks with holders
- Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings
- 1 pair of steel ramps with climbing strips and retaining bolts for bridging the reception hooks of the low bed
- The ramps can be placed above or between the hooks
- Mounting facility for steel drive-on ramps at the rear between the outer beams of the gooseneck
- Prepared for bolt-on container supports for 1x20ft on the outer beams
- Mechanical pin and strap connection from low bed to running gear for load bed exchange or installation of extension beams
- With electro-pneumatic-hydraulic couplings
- Outer beams of the low bed with integrated sand coating as anti-slip protection
- Removable loading floor (galvanized), can be inserted in 3 elements between the outer beams, with hardwood covering
- Folding extensions, approx. 230 mm per side
- Hook-in rail at the front of the rear running gear to the low bed for loose approach ramps
- 2 pairs of stake pockets recessed in the external frame of the running gear, for plug-in stakes approx. 100 x 50 mm
- Hook-in rail for loose ALU approach ramps on the rear cross member of the vehicle
- Central lubrication system with 2 pumps
- Remote control (radio and cable)
- 4 extensible warning signs approx. 423 mm x 423 mm
- Extensive lashing positions
Küçük ilan
Leprovica
1.728 km
Düz yataklı yarı römork
ORTHAUSS 1899
Ara
Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 8.300 kg, azami yük ağırlığı: 20.000 kg, dingil konfigürasyonu: 1 dingil, ilk tescil: 04/2001, bir sonraki muayene (TÜV): 01/2025, yükleme alanı uzunluğu: 7.050 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, lastik durumu: 90 yüzde, yerden yükseklik: 150 mm, renk: mavi, römork freni: frenli römork, Üretim yılı: 2001, ORTHAUS 1 dingilli lowbed. Yönlendirilebilir dingil. Kaldırılabilir yükleme zemini. Sabit gooseneck. Yükleme alanı 7050 mm. King pim yüksekliği 1250 mm.
Fpjdpfx Aqoxw Uaqetoh
Küçük ilan
Parma
2.155 km
Açık alçak platformlu yarı römork
Zorzisemirimorchio pianale ribassato aperto
Ara
Durum: iyi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 6.400 kg, azami yük ağırlığı: 30.400 kg, toplam ağırlık: 36.800 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/1999, yükleme alanı uzunluğu: 13.800 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 1.050 mm, toplam uzunluk: 13.700 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 445.45 r 19.5, renk: gümüş, römork freni: frenli römork, Üretim yılı: 1999, Donanım: ABS, Kullanılmış Zorzi alçak platform açık yarı römork, 1999 model, 3 diskli aks, 1. aks kaldırılabilir ve 3. aks yönlendirilebilir, ABS, havalı süspansiyon, 13,80 m uzunluk, kingpin bağlantı maks. 1,05 m, yan kelepçe kancaları, 20 ve 30 feet konteynerler için twistlock kancaları, BAYİ INTERDRIVE SRL-PARMA.
Fpsdpfjywhdlex Aqtsh
Küçük ilan
Salzburg
2.037 km
Alçak yükleyici yarı römork
GoldhoferSTZ-VKL 3-34/80 A with Extension beam´s
Ara
Durum: iyi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, toplam ağırlık: 57.600 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.240 mm, yükleme alanı genişliği: 2.750 mm, yükleme alanı yüksekliği: 945 mm, renk: mavi, Üretim yılı: 2008, Bu düşük yataklı treylerden iki adet mevcut
Üretici: Goldhofer
Tip: STZ-VKL 3-34/80 A
Yıl: 2008
Toplam ağırlık: 54.000 kg
Boş ağırlık: 21.000 kg
Fodpoxc U Nvefx Aqtsph
Yük kapasitesi: 33.000 kg
Toplam tren uzunluğu: 20.000 mm (maks. teleskopik 24.200 mm)
Yükleme alanı (uzxgen): 7.300 mm x 2.750 mm (teleskopik olarak 4.200 mm’ye kadar)
Lastikler: 235/75 R 17,5
Ekstra:
Uzatma kirişi: 2x 6.000 mm
Küçük ilan
Beselich
2.477 km
İnşaat makineleri için alçak yükleyici römorklar
CETRATEKMS TL89-4
Ara
Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 7.500 kg, azami yük ağırlığı: 36.500 kg, toplam ağırlık: 44.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.190 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, süspansiyon: çelik-hava, lastik boyutu: 235×75 R17,5, dingil mesafesi: 1.310 mm, Üretim yılı: 2024, Donanım: ABS, merkez döner tabla, CETRATEK 4-Axle Low Loader TL89.4 (EU-COC)
Short Description
Robust low loader for heavy machinery transport. Frame constructed from high-strength ST-52/S355 steel, with optional fine-grained steel S700. Each ramp supports up to 20 t load, can be folded mechanically or hydraulically without loss of capacity. Optionally available as a low-bed version, with loading height in the wheel recess area adjustable from approx. 900 mm down to approx. 500 mm.
Dimensions / Construction
Overall length: 11,914 mm, overall height: 3,775 mm (over ramps)
Platform: Gooseneck 2,440 mm + loading area 6,750 mm
Width: 2,540 mm (manually extendable by 250 mm on each side)
Coupling to 1st axle: 2,767 mm, to 2nd/3rd axle: 6,136 mm
Axle spacing: front 1,310 mm, rear 1,360 mm
Platform height: 900 mm (low-bed approx. 500 mm), track width 1,850 mm
Rear ramps: 3,000 × 750 mm, laterally adjustable, 20 t per ramp
Drawbar eye height: 400–900 mm; turntable Ø 110 mm (CYR)
Floor: steel + 45 mm hardwood (hornbeam), coated for protection
Weights / Capacity
a) GVW 44,000 kg → Payload approx. 36,500 kg*
b) On-road 24,000 kg → Payload approx. 16,500 kg
* Version a) requires a special permit according to §70 StVZO; appraisal/DEKRA inspection available at extra cost.
Fjdpfxeu Rbzvo Aqtjph
Drawbar eye Ø 50 mm (optional Ø 40 mm), unladen weight approx. 7,500 kg
Rear supports: manual (hydraulic option available)
Steel Structure / Chassis
Welding qualification TS EN ISO 9606-1, processes TS EN ISO 4063, shielding gases TS EN ISO 14175
4 × 11-t axles (TRAX), tyres 235/75 R17.5 (16 pcs., PETLAS or equivalent; Continental/Michelin available at extra cost), rims 6.75×17.5, air suspension, approved up to 100 km/h
Brakes / Electrics
WABCO EBS 4S/2M, linings 330×200, air tanks 2×80 L + 1×60 L
Brake cylinders: 4× type 24 + 4× type 24/30, levers 165 mm
Voltage: 24 V (voltage converter required with 12 V towing vehicle)
Side reflectors: 4× LED per side + 2× white front reflectors, rear lights 2× LED, 2× triangular reflectors
Connections: 7-pin EBS ISO 7638, 7-pin ISO 1185/3731, 15-pin ISO 12098
Tractor operation notice: 12→24 V converter as well as ABS/EBS connection (ISO 7638) and power supply (e.g., ISO 1185/12098) required for on-board hydraulics.
Hydraulics (Ramps)
2 cylinders, including changeover valve to use tractor unit’s on-board hydraulic system
Accessories (extract)
2 toolboxes, 2 wheel chocks (metal), fire extinguisher box
Reflectors (side white/yellow; extensible yellow/red), rectangular rear reflectors
Lashing eyes: 7 per side + 6 on the platform (10 t each)
Mud flaps (front/rear), hose/cable holders on the drawbar
Paintwork
Sandblasted, 3× epoxy primer, 3× acrylic (≈ 230 µm), 1× acrylic clear coat
Warranty
2 years on frame structure and axles (excluding accidents/operator error)
2 years on electrical & braking system (excluding wear parts such as brake pads, accidents/operator error)
1 year on paintwork (excluding accidents/operator error)
Technical specifications and prices subject to change without notice. Images for illustration purposes only and may include optional features.
Küçük ilan
Beselich
2.477 km
İnşaat makineleri için alçak yükleyici römorklar
CETRATEKMS TL80-3
Ara
Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 5.500 kg, azami yük ağırlığı: 24.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.821 mm, yükleme alanı genişliği: 2.545 mm, yükleme alanı yüksekliği: 900 mm, süspansiyon: çelik-hava, lastik boyutu: 235×75 R17,5, dingil mesafesi: 1.360 mm, renk: mavi, Üretim yılı: 2024, Donanım: ABS, We are pleased to present our new 3-axle low-loader with an impressive permissible gross weight of 30 tonnes! This robust vehicle is the ideal choice for the safe and efficient transport of heavy machinery and equipment.
TECHNICAL HIGHLIGHTS:
Total loading length: 8,820 mm – ideal for large and bulky loads.
Hydraulically folding loading ramps: The ramps measure 3,000 mm x 750 mm and can be adjusted side-to-side, making loading even easier. With excavator bucket recess. Sturdy construction: Despite its low tare weight of only 5,500 kg, the low-loader offers an impressive payload of 24,000 kg – perfect for heavy-duty operations. Trailer length and width: The standard width is 2,545 mm, but can be flexibly extended by 250 mm on each side using manual extensions. Towing eye: Standard 50 mm version for secure and easy coupling to towing vehicles.
RUNNING GEAR AND SAFETY:
Fedpou Rbrzsfx Aqteph
Tyres: 12 robust tyres size 235×75 R17.5, ideal for long distances and various road conditions.
100 km/h configuration: Equipped with WABCO brakes and air suspension for safe and comfortable driving even at high speeds.
Axles: 3 x 11-tonne axles ensure a high level of stability and load capacity.
FLEXIBILITY AND SECURING OPTIONS:
Lashing points: A total of 7 lashing eyes per side, plus 6 additional on the loading area, provide ample securing points for safe cargo securing.
FINISH AND PROTECTION:
Surface treatment: The trailer is sandblasted, primed, and coated with a high-quality two-component paint. For extra corrosion protection, full galvanization is available as an option.
WARRANTY AND SERVICE:
Warranty: You receive a 24-month manufacturer's warranty, excluding brakes and wear parts.
This low-loader combines maximum payload, flexibility, and safety in a compact and reliable design – the perfect partner for heavy-duty transport!
OPTIONS:
- Hydraulic rear support legs
- Galvanization
- Tyre pressure monitoring system (TPMS)
- Low-bed version (deck height 600 mm in the recesses)
Do you have any questions, or would you like a personal quote? Call us – we look forward to hearing from you!
Küçük ilan
Nürnberg
2.232 km
İnşaat makineleri için alçak yükleyici römorklar
Humbaur5-ACHS-TIEFLADER HTD 50 V49 Basic Plus
Ara
Durum: yeni, boş ağırlık: 10.650 kg, azami yük ağırlığı: 39.350 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.830 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 235/75 r17,5 zoll, Üretim yılı: 2026, Donanım: ABS, merkez döner tabla, 5-AXLE SWING BOGIE LOWBED TRAILER, HOT-DIP GALVANIZED
=> FULL AIR SUSPENSION
=> HOT-DIP GALVANIZED
Fpodpfx Aohmm Rcoqtoh
IN TOP CONFIGURATION!!!!
* AS LIFT AXLE
* AS SELF-STEERING FOLLOWING AXLE
• SAF – LOWBED AXLES
• AIR SUSPENSION
• ONE-PIECE LONG LOADING RAMPS
• HYDRAULIC RAMP LIFTER
• HYDRAULIC REAR SUPPORTS
• HYDRAULIC SIDE SHIFTING
• HYDRAULIC SYSTEM UP TO 150 LITERS/MINUTE
• EXCAVATOR ARM TROUGH
• CHASSIS AND BOGIE FRAME HOT-DIP GALVANIZED
• OUTER FRAME ADDITIONALLY PAINTED IN RED
• LOADING RAMPS HOT-DIP GALVANIZED
• 10 t RECESSED LASHING POINTS IN LOADING PLATFORM
• 3 t LASHING POINTS IN OUTER FRAME (High Deck)
• 6 t LASHING POINTS IN OUTER FRAME (Lowbed)
• 4 pairs of 3 t lashing points in outer frame (Lowbed)
• LASHING POINTS IN EXCAVATOR ARM TROUGH
• 3-METER WIDENING PACKAGE
• FOLD-OUT EXTENSIONS
• WOODEN PLANKS IN STEEL BOX UNDER LOADING PLATFORM
• SECOND STEEL STORAGE BOX UNDER LOADING PLATFORM
• WARNING SIGNS
• REAR BEACON LIGHT
• REAR STEPS
• 2 STORAGE BOXES IN HIGH DECK
• DIGITAL AXLE LOAD DISPLAY
• WABCO SMARTBOARD
• AIR SUSPENSION
• LIFT-AND-LOWER VALVE AT REAR (REAR LOWERING FOR LOADING AND UNLOADING)
• STAKE POCKETS IN OUTER FRAME
• TWO STAKE POCKETS INCLUDING DROP-IN STAKES AT FRONT END
• EBS - ELECTRONIC BRAKING SYSTEM
B-DIMENSION = approx. 11,790 MM
=> Freight cost for delivery: €2.90 plus VAT per km
=> Prices ex D-86368 Gersthofen
Your direct contact:
Mr. Hirn, Tel.
DOLL Fahrzeugbau
*Subject to prior sale and changes!*
*Price valid ex D-86368 Gersthofen*
*Sale only to business customers!*
*Images may deviate and are for general guidance only – may include/show accessories for extra charge*
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Göttingen
2.411 km
Alçak yükleyici yarı römork
MeusburgerMTS 3 - 45 T - 1. Hand
Ara
Durum: ikinci el, boş ağırlık: 12.450 kg, azami yük ağırlığı: 32.550 kg, toplam ağırlık: 45.000 kg, ilk tescil: 11/2008, yükleme alanı uzunluğu: 9.730 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, renk: turuncu, işletme ağırlığı: 12.450 kg, Very well-maintained vehicle from first owner: Meusburger MTS 3 - 45T
Tri-axle low-loader trailer with drive-on ramp
Heavy-duty transport
Type: MTS 3
Gross vehicle weight: 45,000 kg
Payload: 32,550 kg
Length: 13,900 mm
Width: 2,500 mm
Fjdpfxowb Sh Ae Aqtjph
Air suspension
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 5-Achs-Tele-Semi-nachlaufg.
Ara
Durum: yeni, boş ağırlık: 14.800 kg, azami yük ağırlığı: 61.700 kg, toplam ağırlık: 76.500 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, lastik boyutu: 235/75/r17,5, renk: gri, Donanım: ABS, Gooseneck:
• Gooseneck with rear bevel approx. 750 mm x 10°
• 3 pairs of lashing rings
• 30 mm thick hardwood flooring
Loading platform:
• Extendable loading platform with rear bevel approx. 500 mm x 8°
• 9 pairs of outwards folding lashing rings
• 1 pair of flat lashing rings at the front of the loading platform
• Cut-outs in the outer frame for attaching tension belts
• Approx. 48 mm thick hardwood flooring, checker plate covering above axles
Landing gear:
• JOST mechanical landing legs with 2-speed gearbox, lifting capacity 24 t (test load 50 t)
Axles and tyres:
• BPW axles and suspension, 1st axle steering, 2nd and 3rd fixed, 4th and 5th trailing axles
• Technical axle load: 12,000 kg
• 1st, 4th and 5th axle with electro-magnetic reverse lock, activated via reverse gear and manually
• Tyres 235/75 R 17.5 3PMSF
Braking system:
• WABCO brake system in accordance with EU regulations, incl. EBS-E (4S3M)
Paintwork:
• First class and long-lasting corrosion protection of the standard-shot-blasted welded frame, guaranteed by a 2-component zinc-rich primer
• High-quality 2-component top coat, single colour MB 7350 Novagrau
• Rear section metallised and painted RAL 9010 (pure white)
Steel construction:
• Fabricated from high-tensile fine-grained steels
• Steel grades:
• S355J2+N/S355MC (yield strength 355MPa)
• S690QL/S700MC (yield strength 690MPa)
Equipment:
• One spare wheel with holder in front of the bulkhead
• 2" kingpin
• Galvanised steel front bulkhead approx. 400 mm high
Fpjdpfx Asma Hf Rjqteh
• Yellow-red air couplings on galvanised connection strip at the front
• 2 wheel chocks with holder mounted to the bulkhead
• Provision at rear of gooseneck for ALU loading ramps
• Galvanised extendable deck wideners, approx. 230 mm per side
• Bracket for beacon at the rear of the trailer
• Galvanised supports under the rear bevel of the loading platform
• White reflective tape to EU regulations on sides, extension; red at the rear
• Mounting hardware for warning signs with socket at gooseneck and rear, left and right
• Detachable ALU side and rear boards on gooseneck, approx. 2,440 x 400 mm
• Removable rear galvanised stanchions (body length approx. 2,560 mm)
• 3 pairs of WADER container locks in platform for 20ft (30ft) or 40ft container
• 7 pairs of stanchion pockets for 100 x 50 mm stanchions in outer frame
• Lift axle on front axle with TEBS E control, responsive to axle load and load status
• Adjustable mounting rails for ALU loading ramps at rear
• 20 x 20 mm square climbing strips every 200 mm on outer frame of the platform bevel
• BEKAMAX (Pico) central lubrication system with NLGI-2 grease, removable pump protection
• 4 extendable warning signs approx. 423 x 423 mm with position light, extend by approx. 400 mm
• Mounting for beacon on warning signs
• European reflective plates (red-yellow) at rear of trailer
• 80 km/h speed stickers on rear and both sides
• Load gauge to determine axle loads including load diagram
• HRM Metallisation (High Resistance Metallisation) of outer frame
• Complete steel structure shot-blasted; all defined visible areas finished with ZINACOR 850 (85% zinc – 15% aluminium) hot metallisation
Küçük ilan
Vaihingen an der Enz
2.364 km
Beko inşaat makinesi römorku
BekoZAH14
Ara
Durum: yeni, azami yük ağırlığı: 10.200 kg, toplam ağırlık: 14.000 kg, yükleme alanı uzunluğu: 6.050 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 830 mm, toplam uzunluk: 8.280 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 2.400 mm, süspansiyon: çelik, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, BEKO ZAH 14
Construction:
Completely hot-dip galvanized.
Robust base frame specially designed for point loads.
Reinforcement in the outer frame, with supports.
Rear section beveled twice by approx. 3 degrees, for equipment with low ground clearance.
Continuous side plank with lashing channel and edge as anti-slip protection.
Completely drive-over capable, including with over-width machines.
Brake system with EBS / ABS.
24 V EU-compliant electrical system with LED outline and marker lights.
DIN towing eye, D = 40 mm, coupling height approx. 60 cm.
Contour marking on driver's and passenger's side on the outer frame profile.
Rear supports manually height-adjustable in 5 steps.
Flooring:
Slip-resistant expanded metal flooring, continuously welded, at level and rear slope.
Load securing:
Continuous side plank with lashing channel and edge as anti-slip protection.
11 pairs of lashing rings (4,500 daN) welded into the outer frame.
Ramps 2R 185 ZAH:
Fsdpsy R Nmnsfx Aqtsph
Loading ramps 2 x approx. 1.85 m long and 0.85 m wide.
Ramps can be manually shifted sideways in full.
Completely hot-dip galvanized.
Slip-resistant, fully welded expanded metal surface.
Fully drivable.
Maximum axle load of the cargo: 8 tons.
Ramp lift with gas springs, smooth and maintenance-free.
Ramp safety lock with diagonal supports, removable.
Additional equipment included:
Stainless steel storage box 800 x 400 x 500 mm, with gas springs, ventilation system, lockable
2 pairs of stanchions with pockets
2 pairs of container locks
Net € 29,900.-
Küçük ilan
Büyükkayacık OSB
253 km
Damperli yarı römork
LiderDumper 4 axles
Ara
Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 9.000 kg, yükleme alanı hacmi: 35.000 m³, lastik boyutu: 385 /65 R22,5, Üretim yılı: 2026, işletme ağırlığı: 60.000 kg, şasi üreticisi: Lider, Donanım: ABS, 2025 TİPPER SEMİ TRAİLER
Fodpeyq Dhlofx Aqtsph
Lider Trailer for Heavy-Duty Trailers
High Quality and Durability Manufacturing
EU Standards
One-year warranty for manufacturing defects
Double Line Brake Systems or EBS Systems
Customer Requested Colour.
2026 Production.
Sizin için aramayı kolaylaştırıyoruz: "pavelli alçak yataklı yarı römork inşaat makinesi taşımak için"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.



































































































































































































































































