İkinci El Faymonville Stz-3Ub Satın Al (249)

Durum: yeni, azami yük ağırlığı: 36.461 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.480 mm, toplam yükseklik: 860 mm, Üretim yılı: 2026, Technical Description Gooseneck: Gooseneck with rear taper approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). 30 mm thick hardwood flooring. Loading Area: Hydraulically liftable and lowerable platform after the gooseneck, approx. 2,800 mm in length, with rear taper approx. 1,000 mm x 8°. 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN). 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN). 1 pair of foldable lashing rings to the inside on the front central beam (LC 10,000 daN). Grating floor covering C40/4 (point load 2.3 t on an area of 20 x 20 cm), over the axles tread plate covering. Two-Piece Steel Ramps: One pair of galvanized two-part steel ramps approx. 3,185 + 1,420 x 1,250 mm with grating covering C40/5 (point load 8 t on an area of 20 x 20 cm). Ramps with hydraulically folding ramp sections and hydraulic lifting mechanism. Maximum load per pair: 40,000 kg In accordance with Regulation 1230/2012/EU, ramps with a length of less than 300 mm in driving position are not included in the overall vehicle length of 16,500 mm. Iedjw Dl Hwspfx Adqebb Landing Legs: JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load). Tyres: 235/75 R17.5 3PMSF tyres at the manufacturer’s discretion. TPMS: TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the towing vehicle via the standardized EBS interface according to ISO 11992. For proper display, the towing vehicle must be capable of transmitting and displaying this data. Axles: BPW axles and suspension, 2 rigid axles, 1 trailing steering axle. Technical axle load: 12,000 kg Electromagnetic reverse lock, activated by reverse gear and manually. Air suspension with lift and lower valve. Axle tools. Brake System: WABCO brake system in accordance with EU regulations with EBS-E (2S2M) without connection lines to the tractor unit. Electrical System: Electrical system complying with EU regulations, 24-volt LED lighting ASPÖCK-NORDIK (ASS3). All LED side marker lights flash with the indicators. ASPÖCK-UNIBOX at the front connection strip with sockets 24N, 24S & 15-pin. Connections in accordance with ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel Structure: Manufactured from high-strength fine-grained steels. Steel grades: – S355J2+N / S355MC (yield strength 355 MPa) – S690QL / S700MC (yield strength 690 MPa) Curtain Body: Curtain body ??? 3,960 mm ??? – Galvanized front wall with tensioning system for sliding curtains. – "EDSCHA" brand roof, forward-sliding on ALU roof bow profiles (bolted to front and rear wall). – 3 pairs of sliding stakes in the loading area. – Rear of the body hydraulically extendable to left and right by approx. 750 mm. – Sliding roof with upwards foldable portal beam. – Sliding curtain with 700 mm length reserve, lashing straps approx. every 600 mm. – Height to upper edge of body approx. 3,960 mm (loaded). – Driving with open sliding roof is prohibited and will damage the curtain. Paintwork: Entire steel structure is automatically blast-cleaned with a wheel blasting machine after welding. Second blast treatment with corundum for optimal coating adhesion. HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure maximum corrosion protection. Final painting with 2 coats of 2K topcoat, single colour, shade of choice according to RAL system 841GL. Rear section metallized and painted in RAL 9010 (pure white). No metallic paint.

Durum: yeni, azami yük ağırlığı: 25.300 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment details available on request. Gooseneck * Gooseneck in SNT design for optimized deck length * Length approx. 3,750 mm; gooseneck hydraulically liftable/lowerable and detachable * Technical fifth wheel load: 25,000 kg. Suitable for tractors: 4 x 2 and 6 x 2 Tanker deck * Low bed designed as extendable tanker deck in SUPER LOW design * Length approx. 6,850 mm * with mechanical locking * Supply lines are protected in extendable beams and automatically adjust to the respective low bed length Rear running gear * In short version with closed outer frame and checker plate cover * Running gear with excavator trough, this is closed in the rear section to house air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Tyres * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twin tires. Load index 143/141J (146/146F) Braking system * Make: WABCO. EBS-E according to EU regulations, WITHOUT connection cable to the tractor unit Paintwork * 6-coat treatment * Complete steel structure shot-blasted after welding * 1 layer zinc-based primer * 1 layer adhesion primer. Final coating with 2 layers of 2K (acrylic) single-color paint, followed by cavity sealing with special wax Trailer color * RAL 3002 Carmine Red * Rim color: Silver-grey * Sidewall color: Natural Aluminum Accessories included * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for hydraulic operations, excluding hydraulic winches. Without installation of supply connections on the tractor unit * Mounting adapter for 1 spare wheel in front of the gooseneck’s front wall * Outer beams of the gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from the front, then every approx. 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear chamfer of the gooseneck (LC 6,000 daN) * 2-inch king pin * Hydraulic spreader beam for supporting the gooseneck on the tractor or a dolly * Air connection with air gun on the gooseneck * 1 pair of steel ramps with climbing strips and mounting bolts to bridge the low bed’s mounting hooks * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * On the outer beams of the loading area, provisions for removable load floor * Lashing rings with retaining spring approx. every 1,200 – 1,300 mm outside on the inner beams of the loading area Ibsdov Sw E Aspfx Adqjb * Lashing rings with retaining spring approx. every 1,200 – 1,300 mm outside on the outer beams of the loading area (LC 10,000 daN) * Cutouts in the upper chord of the outer beams above the lashing rings * Mechanical bolt-tab coupling from the low bed to the running gear, for deck replacement or installation of extension beams. With electro-pneumatic-hydraulic couplers * Outer beams of the low bed coated with anti-slip sand layer * 2nd driving height for upper driving position, max. ± 50 mm from normal driving position, without installation of controls from the tractor unit * 1 pair of lashing rings with retaining spring at the transition from the low bed to the excavator trough (LC 10,000 daN) * Chamfered front and rear a

Durum: yeni, boş ağırlık: 15.900 kg, azami yük ağırlığı: 63.500 kg, toplam ağırlık: 68.000 kg, dingil konfigürasyonu: > 3 aks, yükleme alanı uzunluğu: 12.700 mm, yükleme alanı genişliği: 2.740 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75/r17,5, renk: gri, işletme ağırlığı: 52.100 kg, Donanım: ABS, Gooseneck: Gooseneck in SNT design to optimize loading platform length, approx. 3,300 mm long, with rear taper approx. 1,000 mm x 10° Technical fifth wheel load: 23,000 kg For tractor units: 6x2, 6x4 and 8x4 Loading Platform: Telescopic loading platform, length approx. 9,400 mm, with rear taper approx. 500 mm x 10° A recess integrated into the platform and extending into the incline to accommodate the excavator bucket stick approx. 3,850 x 950 x 210/290 mm Pneumatic locking with tapered locking pins and reinforced locking positions; supply lines are routed safely inside the extendable beams and automatically adapt to the current platform length Axles and Tyres: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool 235/75 R 17.5 3PMSF twin tyres Load index 143/141J (144/144F) Two-part Steel Ramps: One pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide Hardwood covering Hydraulically folding ramp tips Ramps hydraulically adjustable individually: approx. 235 mm outward, approx. 215 mm inward Braking System: WABCO EBS-E brake system in compliance with EU regulations Sockets and Lighting: 24-volt lighting system Full Metallization: Complete HRM metallization with ZINACOR 850 for optimal corrosion protection Surface Treatment: Entire steel structure shot-blasted automatically after welding using a blast wheel Second blasting with corundum for optimal coating adhesion Final coating with two layers of two-component paint (single colour, Nova grey), then cavity sealing with special wax Rims in silver grey Steel Structure: Steel structure made from high-tensile fine-grained steels Steel grades: S355J2+N/S355MC, S690QL/S700MC Accessories: Plug-in steel front wall, approx. 400 mm high Connection strip for supply lines to the tractor unit Spiral cable for supplying the electro-hydraulic unit and/or electric winch between trailer and tractor unit with plug for electro-hydraulic unit for hydraulic control functions, except hydraulic winches Outer beam of gooseneck with mounting holes for bolted lashing rings First hole approx. 200 mm from the front, then every approx. 400 mm One mounting hole at the upper rear portion of gooseneck outer beam for a bolted lashing ring Approx. 40 mm thick hardwood flooring above the gooseneck, chequer plate over kingpin area Gooseneck guide plate for the saddle plate, approx. 500 mm wide Continuous hardwood flooring (approx. 50 mm thick) over the loading platform, interrupted between the axles Locking of the loading platform using welded conical locking profiles every 250 mm, including pre-tension plate Isdsmfqi Iopfx Adqjbb Oblong holes for insertable and repositionable bridging elements: on the fixed section behind the gooseneck at the front of the platform 1 sliding intermediate table for the telescopic tube with large cross-section Operating valves for hydraulic ramps on right side of vehicle Central lubrication system with 1 pump, standard grease according to NLGI-2 Radio remote control for steering override operation, in addition to cable remote, with 2 indicator lights on receiver for one-track monitoring

Durum: ikinci el, renk: kırmızı, Üretim yılı: 2016, Faymonville F-S43-1BGS. Yıl: 2016. 9 tonluk SAF akslar. Ağırlık: 9030 kg. Maksimum ağırlık: 45.000 kg. Çekme yükü: 18.000 kg. 7,5 metre uzatılabilir. Hidrolik sistem, kamyondan NATO bağlantısı üzerinden çalışır. EBS ABS ALB. Radyo ile uzaktan kumanda. Güçlendirilmiş direksiyon, 3 direksiyonlu aks. Iodozybx Eepfx Adqebb Hava süspansiyonu. Kilit mekanizması için hazırlık. Platform ölçüleri: Uzunluk: 13.600 mm. Genişlik: 2550 mm. Yükseklik: 1480 mm. Lastikler: 385/65R22,5, %50 diş derinliği. Kimlik No: 561. Heinhuis'in Genel Şartlar ve Koşulları, Heinhuis tarafından yapılan tüm reklamlar, teklifler ve fiyat teklifleri, Heinhuis tarafından yapılan tüm sözleşmeler ve bunlara öncülük eden müzakereler için geçerlidir. Herhangi bir yanıt biçimiyle, Heinhuis'in Genel Şartlar ve Koşulları'nın geçerliliğini kabul etmiş olursunuz ve bu Genel Şartlar ve Koşulları okuduğunuzu beyan edersiniz. Fiyatlarımız, ihracat için geçerli net fiyatlardır. = Ek Bilgiler = Üretim Yılı: 2016 Boş Ağırlık: 9.030 kg Yük Kapasitesi: 35.970 kg Toplam Ağırlık: 45.000 kg Uzatılabilir Platform: Evet = Şirket Bilgileri = Daha fazla bilgi için:

Durum: yeni, azami yük ağırlığı: 45.115 kg, toplam ağırlık: 53.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, Diğer araçlar için lütfen iletişime geçiniz. Donanımın tamamı talep üzerine verilir. Yükleme alanı: - Yaklaşık 30 mm kalınlığında sert ağaç döşemeli yükleme alanı - Dışa doğru katlanabilir 8 çift yük sabitleme halkası (LC 10.000 daN) Yarı römork ayakları: - JOST marka mekanik yarı römork ayakları, iki kademeli şanzıman ile yaklaşık 24 ton kaldırma kapasitesi (yaklaşık 50 ton test kapasitesi) Lastikler: - 385/65 R 22.5 - TPMS lastik basıncı izleme sistemi, ECE R 141’e uygun. Motor aracı ile veri iletişimi ISO 11992’ye göre standartlaştırılmış EBS arayüzü üzerinden yapılır. Doğru gösterim için motorlu araç bu verileri aktarabilmeli ve gösterebilmelidir. Akslar ve süspansiyon: - BPW akslar, teknik olarak her biri 10.000 kg - 1. ve 3. aks hidromekanik zorunlu yönlendirmeli, döner tabla üzerinde; 2. aks sabit - Havalı süspansiyon, kaldırma ve indirme valfi ile - Aks takımı ekipmanı Fren sistemi: - Wabco fren sistemi, AB yönetmeliklerine uygun, EBS-E (4S3M), çekici araca bağlantı hatları olmadan Elektrik sistemi: - AB yönetmeliklerine uygun elektrik sistemi, 24 volt aydınlatma ASPÖCK-NORDIK (ASS3) - Ön bağlantı barasında ASPÖCK-UNIBOX, 24N, 24S & 15 pinli prizler ISO’ya uygun Ijdpfxezhd Nis Adqobb - 24N ISO-1185 - 24S ISO-3731 - 15 pin ISO-12098 Çelik konstrüksiyon: - Yüksek mukavemetli ince taneli çeliklerden üretilmiş çelik yapı - Çelik kaliteleri: S355J2+N/S355MC (akma dayanımı 355MPa), S690QL/S700MC (akma dayanımı 690MPa) Boya: - Tüm çelik yapı, kaynak işlemi sonrası otomatik türbinli makine ile kumlanır - Mükemmel kaplama yapışması için ikinci kez korund ile kumlama - Son kat boyama: iki kat 2K son kat boya, tek renk RAL 3002 Karmin Kırmızı (RAL sistemi 841GL'ye uygun) - Arka kısım metallize ve RAL 9010 (Saf Beyaz) renkte boyalı - Jantlar gümüş renkte - Tuz püskürtme testi (ISO 9227-NSS) ile boya sisteminin test edilmesi - Boşluklarda özel mum ile sızdırmazlık Aksesuarlar: - Yaklaşık 30 mm kalınlığında sert ağaç döşemeli yükleme alanı - 2” king pin - Galvanizli çelik ön panel (EN12642-XL), yaklaşık 1.200 mm yüksekliğinde - Ön bağlantı barasında sarı-kırmızı hava bağlantıları - Ön panelde yuvalarında 4 adet takoz - Merkez taşıyıcı arka kısmında yaklaşık 1.000 mm'lik yan destekler için raf - Kaz boynu ve arka sacda sağda ve solda uyarı tablaları için yuva ve prizler - Yanlarda ve römork arkasında AB yönetmeliklerine uygun sarı reflektör bantı - Yükleme alanı dış çerçevesinde yaklaşık 100 x 50 mm 10 çift yan destek yuvası - Römork arka kısmında Avrupa tipi reflektör plakaları (kırmızı-sarı) - Römork arka kısmında döner uyarı lamba yuvası - Römork arka kısmında bir çamurluk - Kullanım kılavuzu ve açıklama USB bellekte - Arka ve yanlarda 80 km/h hız etiketi - Elektro-hidrolik ünite - Takviye ile arka travers üzerine monte edilmiş 1 manevra bağlantısı - Aks yükünü belirlemek için yük manometresi, yük diyagramı dahil - BEKAMAX (Pico) merkezi yağlama sistemi, NLGI-2 normal gres ve pompa çevresinde çıkarılabilir koruma - Ön ve arka kısımdan, kablolu uzaktan kumanda ile yönlendirme; aksların tek izli kontrolü (çekiciye entegrasyon yapılmadan) - Yaklaşık 100 x 50 mm ve yaklaşık 1.000 mm yüksekliğinde 7 çift galvanizli yan destek - Yükleme alanına enlemesine monte edilmiş 4 çift yan destek rayı, yaklaşık 100 x 50 mm ölçülerinde yan destekler için - Elektro-hidrolik ünite ve/veya elektrikli vinç beslemesi için spiral kablo (yaklaşık 35 mm², yaklaşık 3,5 m uzunluğunda, max. 250A), çekici ve römork arasında NATO-NATO bağlantılı - Yükselme merdiveni

Durum: yeni, azami yük ağırlığı: 46.800 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: > 3 aks, Donanım: ABS, Web sitemizde hemen ve kısa sürede kullanıma hazır olan tüm araçlarımızı bulabilirsiniz. Donanım Özeti: Tam donanım talep üzerine sunulmaktadır. Kaz Boynu * Ön tarafta yaklaşık 45° açılı köşelerle ve arka tarafta yaklaşık 750 mm x 10° açıyla eğimli kaz boynu * 3 çift bağlama halkası (LC 5.000 daN) * Yaklaşık 30 mm kalınlığında sert ahşap kaplama Çekilebilir Tasarımlı Yük Platformu * Arka tarafta yaklaşık 1.000 mm x 8° eğim * Dışa doğru katlanabilen 5 çift bağlama halkası (LC 5.000 daN) * Dışa doğru katlanabilen 3 çift bağlama halkası (LC 10.000 daN) * Yük platformunun ön tarafında yatay konumda 1 çift bağlama halkası (LC 10.000 daN) * Gergi bantlarının takılması için yük platformunun dış çerçevesinde oyuklar (LC 2.000 daN) * Aksların üzerinde çıkıntılı yüzeyli çelik levha kaplama ile yaklaşık 48 mm kalınlığında sert ahşap kaplama Akslar * BPW akslar ve süspansiyon * 1. aks sabit, diğer tüm akslar hidro-mekanik olarak zorunlu olarak yönlendirilir * Teknik aks yükü: her biri 12.000 kg * Kaldırma ve indirme valfli hava süspansiyonu * Aks aleti * Lastikler * 245/70 R 17.5 3PMSF * Yük indeksi (146/146 F) * TPMS: ECE R 141'e uygun TPMS lastik basıncı izleme sistemi Dorse Destekleri * Yaklaşık 24 ton kaldırma kapasitesi (yaklaşık 50 ton test yükü) için 2 vitesli şanzımana sahip JOST dorse destekleri (mekanik) Fren Sistemi * AB yönetmeliklerine uygun olarak EBS-E (4S3M) ile donatılmıştır Boya * Kaynak işleminden sonra tüm çelik yapı, otomatik olarak döndürme disk sistemi ile püskürtülerek temizlenir * Kaplama sisteminin optimum yapışması için korund ile ikinci temizleme işlemi * En iyi korozyon korumasını sağlamak için tüm araç şasisinin HRM metalizasyonu ile ZINACOR 850 (%85 çinko / %15 alüminyum) kaplama * 2 kat 2K üst kat boya ile son kat boyama * RAL 3002 Kırmızı renkte, RAL 841GL sistemine uygun tek renk * Jantlar gümüş gri renkte. Arka kısım metalize edilmiştir ve RAL 9010 (saf beyaz) renginde boyanmıştır Ibodpfjzk S Dmsx Adqob * Metalik boya mümkün değildir * Boya uygulaması, ISO 9227-NSS tuz sisi püskürtme testinde test edilmiştir * Özel bir balmumu ile boşlukların kapatılması Çelik Yapı * Yüksek mukavemetli ince taneli çeliklerden yapılmıştır * Çelik kaliteleri: S355J2+N/S355MC (akma dayanımı 355 MPa) S690QL/S700MC (akma dayanımı 690 MPa) Elektrik Sistemi * AB yönetmeliklerine uygundur Aydınlatma * 24 Volt ASPÖCK-NORDIK (ASS3) * Tüm LED yan işaret lambaları, sinyal lambasıyla birlikte yanıp söner * Ön bağlantı panelinde 24N, 24S ve 15 kutuplu prizli ASPÖCK-UNIBOX * ISO'ya uygun bağlantı. 24N ISO-1185 24S ISO-3731 15 kutuplu ISO-12098 Aşağıdaki ek ekipmanlar dahildir * 2 inç Kral pim * Yaklaşık 400 mm yüksekliğinde galvanizli çelik ön duvar * Elektrikli-hidrolik ünite (± 45 kg) * Ön ve arka taraftan, kablo uzaktan kumandası aracılığıyla düğmelerle kontrol edilebilen takip direksiyonu, aksların tek şerit kontrolü ile (SZM'de kurulum olmadan) * Arka kısımda, eğimli kısımda, merkeze monte edilen taşıyıcı üzerinde yatay konumda 1 çift gömme bağlama halkası (LC 10.000 daN) (± 3 kg) * Kaz boynunda, takılabilir alüminyum yan ve arka duvarlar, yaklaşık 2.440 x 400 mm (U x Y) * Arka galvanizli takılabilir kirişler çıkarılabilir. (Yapının uzunluğu yaklaşık 2.560 mm) (± 46 kg) * Eğimli kaz boynunda entegre, galvanizli bir alet kutusu (± 47 kg) * Yük platformunda, 20' (30?) veya 40? konteyner için 3 çift WADER konteyner cebi (± 30 kg) * Yük platformunun dış çerçevesinde yaklaşık 100 x 50 mm boyutlarında 6 çift kiriş cebi (± 18 kg) * Her iki tarafta yaklaşık 23

Durum: ikinci el, makine/araç numarası: YAFTL407100007347, yükleme alanı uzunluğu: 13.300 mm, yükleme alanı genişliği: 2.530 mm, Üretim yılı: 2007, = Ek Seçenekler ve Aksesuarlar = - Arka havalı süspansiyon - Ön havalı süspansiyon - Tamburlu fren sistemi = Ek Bilgiler = Ağırlıklar Ibjdpfszyvzzex Adqjb Boş ağırlık: 11.900 kg Yük kapasitesi: 36.100 kg Azami toplam ağırlık: 48.000 kg Durum Genel durum: ortalama Teknik durum: ortalama Görsel durum: ortalama Ek Bilgiler Ön lastiklerin durumu: %30 Ön lastikler: 235/75 R 17.5 Arka lastikler: 235/75 R 17.5 Son bakım: 12.08.2026 Ek Bilgiler Daha fazla bilgi için Lastas Satış ile iletişime geçin.

Durum: yeni, boş ağırlık: 9.500 kg, azami yük ağırlığı: 35.500 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.540 mm, süspansiyon: hava, lastik boyutu: 435/50 R 19.5, renk: gri, işletme ağırlığı: 9.500 kg, Donanım: ABS, Loading platform in extendable design: Loading platform with hardwood floorboards, rear chamfer approx. 1,000 mm x 8° 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm 2 pairs of lashing rings (LC 5,000 daN) 1 pair of lashing rings (LC 10,000 daN) 6 pairs of folding external lashing rings (LC 5,000 daN) 2 pairs of folding external lashing rings (LC 10,000 daN) Cut-outs in the outer frame of the loading platform for hooking in tensioning straps (LC 2,000 daN) Braking system: Braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: Premium, durable corrosion protection for the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer High-quality single-color 2-component (2K) top coat in Novagrau Rear section metallised and painted in RAL 9010 (pure white) No metallic effect paint possible Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: Steel construction made of high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: Electrical system in accordance with EU regulations, 24 volt lighting Sockets: 24N, 24S & 15-pin Axles and tires: BPW axles, air suspension, disc brakes (377 mm), with lift/lower function The trailing steering axles can be locked for reversing by electro-magnetic control via reverse gear or manually Axle tools Tires 435/50 R 19.5 Accessories included: At the front galvanized connection rail, yellow-red air couplings 4 wheel chocks with holders 2" king pin Galvanized steel front wall, approx. 1600 mm high, EN12642-XL White reflective tape to EU standards on the sides, on the extension, and red at the rear Loading area with heavy-duty hardwood flooring 9 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading platform 1 spare wheel holder under the loading platform, right side of direction of travel Galvanized drop-down supports under the loading platform chamfer Sliding hook-in strips for ALU loading ramps at the rear of the vehicle European reflective signs (red-yellow) at the rear of the trailer A mudflap at the rear of the trailer A bracket for a rotating beacon at the rear of the trailer On the gooseneck and rear panel, left and right, each with a bracket for warning signs including socket 1 HDPE toolbox 620x360x610 under the loading platform, left side of direction of travel 4 pairs of WADER container locks in the loading platform for 1x 20ft container or 1x 40ft container; the extension is prepared with an additional locking position for a 45ft container 3 pairs of crosswise stake pocket strips mounted in the loading platform for 100 x 50 mm plug-in stakes Lift axle on the front axle with control via TEBS E depending on current axle load and load status Speed stickers 80 km/h at the rear and on both sides Four warning panels, extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light. Each warning panel with a bracket for revolving beacon Load gauge for determining axle loads including load chart HRM metallization (High Resistance Metallisation) of the outer frame Complete steel construction shot-blasted, then the defined visible surfaces are metallised Ibedpfx Aek Eammodqsb

Durum: yeni, azami yük ağırlığı: 48.930 kg, toplam ağırlık: 63.000 kg, dingil konfigürasyonu: > 3 aks, Donanım: ABS, Geniş ürün yelpazemizdeki araçlarımıza, anında ve kısa sürede teslim edilebilen araçlarımız için web sitemizden ulaşabilirsiniz. Ekipman listesinden bir bölüm. Tam ekipman listesi talep üzerine sağlanacaktır. Kaz Boynu * Ön kısımda yaklaşık 45° açılı köşelerle ve arka kısımda yaklaşık 750 mm x 10° açılı eğimle * 3 çift bağlama halkası (LC 5.000 daN) * Yaklaşık 30 mm kalınlığında sert ahşap kaplama Yük Platformu * Arka kısımda yaklaşık 500 mm x 8° açılı eğimle çift açılır tasarımda * Dışa doğru katlanabilen 5 çift bağlama halkası (LC 5.000 daN) * Dışa doğru katlanabilen 4 çift bağlama halkası (LC 10.000 daN) Ibodpfxszlwm Ae Adqjb * Yük platformunun ön kısmında yatay konumda 1 çift bağlama halkası (LC 10.000 daN) * Yaklaşık 250 mm genişliğinde 1 adet ara masa * Yük platformunun dış çerçevesinde, gerdirme bantlarının asılması için oyuklar (LC 2.000 daN) * Yaklaşık 48 mm kalınlığında sert ahşap kaplama, akslar üzerinde tırtıllı sac kaplama Akslar * BPW akslar, hidro-mekanik zorlamalı yönlendirme * Teknik aks yükü: 12.000 kg (her biri) * Kaldırma ve indirme valfi ile hava süspansiyonu Lastikler * 245/70 R 17.5 3PMSF, yük indeksi (146/146 F) * TPMS lastik basıncı izleme sistemi, ECE R 141'e uygun Dorse Ayakları * JOST dorse ayakları (mekanik), yaklaşık 24 ton kaldırma kapasitesi (yaklaşık 50 ton test yükü) için 2 vitesli şanzımanlı Fren Sistemi * AB yönetmeliklerine uygun olarak EBS-E (4S3M) Çelik Konstrüksiyon * Yüksek mukavemetli ince taneli çeliklerden * Çelik kaliteleri: S355J2+N/S355MC (akma dayanımı 355 MPa) * S690QL/S700MC (akma dayanımı 690 MPa) Elektrik Sistemi * AB yönetmeliklerine uygun, aydınlatma 24 Volt ASPÖCK-NORDIK (ASS3) * Tüm LED yan işaretleme lambaları, sinyal ile birlikte yanıp söner * ASPÖCK-UNIBOX, ön bağlantı çubuğunda, 24N, 24S ve 15 kutuplu bağlantı prizleri ile ISO'ya uygun Boya * Kaynak işleminden sonra tüm çelik konstrüksiyon, otomatik olarak bir döner püskürtme sistemi ile temizlenir * Kaplama sisteminin optimum yapışması için korundum ile ikinci temizleme işlemi * Tüm araç şasisinin HRM metalizasyonu, en iyi korozyon korumasını sağlamak için ZINACOR 850 (%85 çinko/%15 alüminyum) ile * RAL 3002 Kırmızı renginde, RAL 841GL sistemine uygun, 2 kat 2K üst kat boya ile son kat boya * Jantlar gümüş rengindedir. Arka kısım metalize edilmiştir ve RAL 9010 (saf beyaz) rengine boyanmıştır * Metalik boya mümkün değildir * ISO 9227-NSS'ye göre tuzlu su püskürtme testi ile test edilmiş boya yapısı * Boşlukların özel balmumu ile kapatılması Aşağıdaki ek ekipmanlar dahildir: 2 inç Kral Pimi * Elektro-hidrolik ünitesi (± 45 kg) * Ön ve arka kısımda, butonlar aracılığıyla kontrol edilebilen kablolu uzaktan kumanda ile direksiyon (aks kontrolü ile) (SZM'de kurulum olmadan) * Kaz boynunda ve arka sac üzerinde, sol ve sağ tarafta, uyarı levhaları için birer adet tutucu, priz dahil * Dorse arka kısmında döner lamba için bir tutucu * Kaz boynunda, takılabilir alüminyum yan duvarlar ve arka duvar, yaklaşık 2.440 x 400 mm (U x Y) * Arka galvanizli bağlantı elemanları çıkarılabilir. (Kasa uzunluğu yaklaşık 2.560 mm) (± 46 kg) * Eğik kaz boynuna entegre edilmiş, galvanizli bir alet kutusu (± 47 kg) * Yük platformunda 4 çift WADER konteyner cebi, 20', 2x 20', 40 veya 45'lik bir konteyner için (± 40 kg) * Yük platformunun dış çerçevesinde, takılabilir bağlantı elemanları için 7 çift bağlama cebi, yaklaşık 100 x 50 mm (± 21 kg) * Her biri yaklaşık 230 mm genişliğinde, dışa doğru uzatılabilen galvanizli genişletmeler (± 262 kg) * Alüminyum rampalar için

Durum: yeni, azami yük ağırlığı: 92.045 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: > 3 aks, Donanım: ABS, Donanım Özelliklerinden Özet Tam donanım talebe bağlıdır. * 1 x MAX710-Hals-V-30-2.70 kuğu boynu * Kuğu boynu hidrolik olarak kaldırılabilir/alçaltılabilir ve ayrıca geri çekilebilir * Uzunluk yaklaşık 3.650 mm. SZM 6x4 veya 8x4 için * Çelik ön duvar, yaklaşık 400 mm yüksekliğinde * Kuğu boynuna takılabilen ALU yan paneller ve arka panel, yaklaşık 400 mm yüksekliğinde, eloksal kaplama * 3,5 inç King pin * Debı kontrol cihazlı kamyon hidrolik bağlantısı (20 l/dk) * Besleme hatlarını asmak için kancalar dahil * SZM tankı en az 80 litre kapasiteye sahip olmalı ve MAX römork bağlantı parçalarına sahip olmalıdır; aksi takdirde bağlantı parçaları müşteri tarafından sağlanmalıdır * BEKA-MAX merkezi yağlama sistemi, normal yağ NLGI-2 ile çalışan bir kuğu boynu için * TPMS lastik basıncı kontrol sistemi * İki adet INOX alet kutusu, yaklaşık 855 x 340 x 390 mm, kuğu boynunun sol ve sağ tarafında (± 48 kg) * 1 silindirli Hatz dizel motor (Silent Pack), elektrikli marş ve marş aküsü ile Ibsdpfx Ajzzhfnjdqob * Kuğu boynundaki güç ünitesi ve bağlantı plakası arasındaki hidrolik bağlantı hatları * Uzaktan kumanda: Güç ünitesinin çalıştırılması, dizel motorun başlatılması/durdurulması * Kablo uzaktan kumandanın yanı sıra destekli direksiyonun çalıştırılması * Alıcıda tek şerit kontrolü için 2 adet LED kontrol lambası * Kuğu boynunun kaldırılması/alçaltılması * Süspansiyon sisteminin kaldırılması/alçaltılması * Kuğu boynundaki çoklu bağlantı hidrolik bağlantıları * Kuğu boynunun arka plakasında, sol ve sağ tarafta, ayrı bir açma/kapama anahtarına sahip 1 adet LED çalışma projektörü * Yaklaşık 423 x 423 mm boyutlarında, LED konum lambası ve döner lamba tutucusu olan, ± 2.000 mm'ye kadar uzayabilen dört adet uyarı panosu. (± 122 kg) * 1 x 3 akslı kompakt ön aks * MAX710-Aks-PA-F-3-19.5-1.36-2.85 * Ön ve arka tarafta kanca bağlantısı * Uzunluk: yaklaşık 3.560 mm * Aks genişliği: yaklaşık 2.850 mm * Ön aks, hava kompresörü için ayrı bir hava bağlantısına sahip * Normal yağ NLGI-2 ile çalışan 3 akslı bir aks için BEKA-MAX merkezi yağlama sistemi. * Ön aksın sol ve sağ arka tarafında, uyarı panoları için bir adet 7 kutuplu priz * TPMS lastik basıncı kontrol sistemi, ECE R 1411'e uygun * Ön aksın arka tarafında, ayrı bir açma/kapama anahtarına sahip, sol ve sağ tarafta LED çalışma projektörü * Ön aks yüzeyi, kaymayı önlemek için tek kat boyalı kum kaplama ile kaplı * Ön aks üzerindeki çoklu bağlantı hidrolik bağlantıları. * 1 x damperli römork şasisi: MAX710-Düşük Yataklı-BB-A-7.15-(430)-2.85 * Üzerinden geçilebilen köprü kancaları ön tarafta ve cıvatalı flanş bağlantısı arka tarafta olan, teleskopik damperli römork şasisi BB-A * Taban genişliği: yaklaşık 2.850 mm, Uzunluk: yaklaşık 7.150 mm * Destek yüksekliği: yaklaşık 430 mm, Destek genişliği: yaklaşık 1.350 mm * Yaklaşık 580 mm yükseklikte, yaklaşık 150 mm yerden yükseklikte * Yaklaşık 1.000 mm, 1 çift yaklaşık 500 mm boyutlarında altı çift çelik mat ve kauçuk zemin (± 1.660 kg) * Damperli römork şasisinin dış borusunun üst kordunda, yaklaşık 500 mm aralıklarla, cıvata halkaları için (LC 16.000 daN) yaklaşık 40 mm çapında vida yuvası * Damperli römork şasisinin iç borusunda, cıvata halkalarının monte edilmesi için yaklaşık 1.000 - 1.200 mm aralıklarla M30 vida yuvası (LC 10.000 daN) * Katlanabilir genişletmeler, çelik matlarla, yaklaşık 2.850 mm'den yaklaşık 3.250 mm'ye kadar genişlikte ayarlanabilir * TPMS lastik basıncı kontrol sistemi * Kletterleisten'li, yaklaşık 1.200 x 450 x 50/400 mm boyutlarında, HeProLen plastik takoz

Durum: yeni, toplam ağırlık: 80.000 kg, dingil konfigürasyonu: > 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, Additional vehicles available – extract from equipment list. Full equipment details upon request. GOOSENECK: * Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front wall, detachable, approx. 400 mm high * ASPÖCK-UNIBOX on the front control panel with 24N, 24S & 15-pin sockets * 3 kW electric-hydraulic power pack for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolted lashing rings: first hole approx. 200 mm from the front, then every approx. 400 mm; 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings in the rear of the gooseneck (LC 10,000 daN) * On the gooseneck, 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * On the gooseneck, 1 plug-in ALU rear board, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring over the gooseneck, over king pin checker plate covering * 3.5 inch king pin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO plug socket on the front control panel (Maeler & Kaege VG 96 917) * 2 pairs of lashing rings with retaining spring suspended on the outer beams of the gooseneck (LC 5,000 daN) LOADING PLATFORM: * Extendable loading platform, approx. 8,800 mm long with rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adapt to the platform length * BPW axles and suspension, 1st axle with steering, all other axles hydro-mechanically forced steering * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Technical axle load: 12,000 kg each Iodpfx Adjxarmaeqebb * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tyres – brand at our discretion * Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load = 50,000 kg * On the platform, continuous and between axles interrupted approx. 50 mm thick hardwood flooring (thereby increasing the coefficient of friction). – Slotted holes for hook-in and repositionable bridging elements * At front of platform – 1 adjustable intermediate table, approx. 300 mm wide, for the extension tube with large cross-section, with checker plate covering. – Front and rear with slotted holes for hook-in and repositionable bridging elements * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 7 pairs of recessed, fold-out lashing rings in the outer frame of the platform (LC 10,000 daN) * Extensions (galvanized) extendable by approx. 230 mm on each side (without wooden planks) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation in tractor unit * TPMS tire pressure monitoring sensors installed in all wheels * Platform locking with conically welded locking profiles every 500 mm * Locking control left and right on the trailer * For the intermediate table, approx. 300 mm wide, a mechanical lock to secure the table to the extension * 5 pairs of threaded blocks on the extendable beam for mounting bolt-on rings M20 (LC 5,000 daN) BRAKE SYSTEM

Durum: yeni, azami yük ağırlığı: 90.700 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: > 3 aks, toplam genişlik: 2.850 mm, Donanım: ABS, You can find our complete inventory of immediately and shortly available vehicles on our website. Excerpt from the equipment list. Complete specification available on request. Gooseneck: Hydraulically liftable/lowerable and detachable gooseneck. Length approx. 3,650 mm. For tractor units: 6 x 4 or 8 x 4 3-axle compact front bogie: * Hook coupling at the front and rear. Length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Low bed: * ATX-A low bed with telescoping longitudinal beams in low-floor design with fixed hardwood floor, approx. 50 mm thick * Equipped with drive-over bridge hooks at the front and bolt-lug coupling at the rear * Base width: approx. 2,850 mm, length: approx. 7,150 mm, beam height: approx. 330 mm, beam width: approx. 750 mm * Loading height approx. 480 mm with ground clearance of approx. 150 mm 5-axle rear bogie: * Mechanical bolt-lug coupling for mounting a low bed at the front, end cross member at the rear * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * Pendulum axle 3-axle front bogie: * PENDULUM AXLE, all axles hydro-mechanically steered * Hose rupture valve on the axle equalizer cylinder with automatic RESET function * Hydraulic cylinder with shut-off valves and positioning pins for safety in raised position * Final painting of axles with two coats 2K paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Front bogie tires: 12 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J 5-axle rear bogie: * PENDULUM AXLE, all axles hydro-mechanically steered * Hose rupture valve on the axle equalizer cylinder with automatic RESET function * Hydraulic cylinder with shut-off valves and positioning pins for safety in raised position * Final painting of axles with two coats 2K paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) Ibsdpfxew Tgp Do Adqeb * Hydraulic axle compensation * Rear bogie tires: 20 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J Paint finish: * HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure maximum corrosion protection * Final coat with two layers of 2K topcoat, single color in RAL 3002 Carmine Red, according to the RAL 841GL system Includes accessories: * Steel front wall, approx. 400 mm high * Plug-in ALU side walls and rear wall for the gooseneck, approx. 400 mm high, anodized version * 3.5" king pin * BEKA-MAX central lubrication for one gooseneck * Multi-coupling hydraulic connections on the gooseneck * Front bogie with a separate air connection for pneumatic tools * BEKA-MAX central lubrication for a 3-axle bogie * Preparation for the installation of bolted container positions for either 1 x 20' or 1 x 30' containers on the outer beams * Without container locks * Brackets on the outer beams of the loading platform for attaching foldable extensions * One 7-pin socket left and right, front and rear, on the rear bogie for warning signs * BEKA-MAX central lubrication for a 5-axle bogie * Socket on the rear bogie for the cable remote control for rear axle steering * Rear bogie with trough * 2 LED reversing lights mounted on the rear plate * European reflective signs (red-yellow) at the rear * One mudflap at the rear * One LED beacon with bracket left and right on the end cross member * Two INOX toolboxes 855 x 340 x 390 mm mounted left and right on the gooseneck * 1-cycle

Durum: yeni, azami yük ağırlığı: 36.410 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our entire stock of vehicles, including those available for immediate or short-term delivery, on our website. Partial list of features. Full specification available on request. NECK: * SNT-design gooseneck for optimized loading platform length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Plug-in steel front bulkhead, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electro-hydraulic power unit for hydraulic operations (excluding hydraulic winches) * Approx. 40 mm hardwood decking above gooseneck * 2-inch kingpin Ibsdpfx Adoy Auh Isqsb * Gooseneck guide plate for fifth wheel, approx. 500 mm wide * Rear of gooseneck equipped for ALU approach ramps * Round NATO socket on front connection strip (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders ahead of the front bulkhead * 1 pair of stake pockets embedded in the gooseneck, for plug-in stakes approx. 100 x 50 mm (inside the chassis beam) EQUIPMENT: * Loading platform approx. 8,800 mm long, extendable version approx. 4,100 mm, rear with taper approx. 500 mm x 10° * Recess in the loading area and into the taper for excavator dipper stick accommodation, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are routed protected inside the extendable beams and automatically adjust to the platform length * TPMS tire pressure monitoring system per ECE R 141 * BPW axles and suspension, 1st and 2nd axle fixed, 3rd axle steered trailing * 3rd axle with electro-magnetic reverse lock, can be activated by reverse gear and manually * Technical axle load: 12,000 kg per axle, air suspension with lift and lowering valve * 235/75 R 17.5 3PMSF twin tires. Brand of our choice * Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load approx. 50,000 kg * Hardwood floor (approx. 50 mm thick) throughout the load area and interrupted between axles (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the large cross-section extension tube. Intermediate table with recessed platform and extendable mountings for aluminium bridging elements * Platform locking with conically welded locking profiles every approx. 250 mm. Includes pre-tensioning plate * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the platform, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses ahead of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D) * Wheel recesses with square climbing strips approx. 15 x 15 mm, with widenings at the bottom (if vehicle equipped with extendable outriggers) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the load area between the 1st and 2nd axle * Wheel recesses with square climbing strips approx. 15 x 15 mm and bottom widenings * Aluminium covers for wheel recesses ahead of the axles and between the 1st and 2nd axle, which can also serve as extension planks (if vehicle equipped with extendable outriggers) * Lockable aluminium elements fitted onto the extension pipes of the outriggers * 1 pair of mechanical rear supports * 1st axle with traction aid * Painted sand...

Durum: yeni, boş ağırlık: 11.300 kg, azami yük ağırlığı: 36.700 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 1.250 mm, süspansiyon: hava, lastik boyutu: 385/65 r 22,5, renk: gri-siyah, Donanım: ABS, Loading Area: Extendable loading platform with pneumatically operated locking mechanism A fixed intermediate table approx. 250 mm wide is mounted on the central beam 8 pairs of folding lashing rings (LC 5,000 daN) 3 pairs of folding lashing rings (LC 10,000 daN) Cut-outs in the outer frame of the loading area for hooking in tension straps (LC 2,000 daN) Axles and Tyres: BPW axles and suspension, all axles hydromechanically forced-steered Disc brakes, technical axle load: 10,000 kg Air suspension with lift and lower valve Axle tool kit 6 tyres 385/65 R 22.5 Brake System: Brake system according to EU regulations with EBS-E (2S2M) Landing Legs: JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load) Steel Construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical System: Electrical system in line with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection bar with 24N, 24S, and 15-pin sockets Connections per ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Painting: Top-class and durable corrosion protection of the standard shot-blasted welded frame provided by a 2-component (2K) zinc-rich primer High-quality 2-component (2K) top coat in single-colour Nova Grey Rear end metallised and painted in RAL 9010 (pure white) Metallic paint not available Included Accessories: One bracket for warning signs, each at the gooseneck and the rear end plate, left and right, including socket Remote steering operated from front and rear using cable remote control with push-buttons, with single-track alignment of the axles Electro-hydraulic power pack 4 wheel chocks with holder on the front bulkhead 2" kingpin One galvanised steel headboard approx. 2,200 mm high Yellow-red pneumatic couplings on the galvanised connection rail at the front White reflective tape per EU regulations on the sides, on the extension, and red at the rear European reflective warning plates (red-yellow) at the rear of the trailer One mud flap at the rear of the trailer Manual and documentation Bracket for revolving beacon at the rear of the trailer Loading surface with approx. 30 mm thick wooden floor embedded in Omega profiles 10 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading area 1 spare wheel holder under the loading platform on the right in the direction of travel 6 pairs of WADER container pockets in the loading area, for 1x 20ft container, 2x 20ft containers, or 1x 40ft container; an additional locking point in the extension is provided for a 45ft container Ijdpfxshlz Sho Adqobb 5 pairs of cross-mounted stanchion pocket rails in the loading area for plug-in stanchions 100 x 50 mm One galvanised bracket crosswise under the loading platform (2,390 x 720 x 400 mm) Entry ladder mounted on the right side in the direction of travel HDPE toolbox 1,200 x 500 x 480 mounted at the front under the loading surface on the left in the direction of travel Lifting axle on front axle, control by TEBS E depending on current axle load and load status Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 general-purpose grease and removable guarding around the pump Red/white reflective tape in the loading platform extension A sand layer painted on the central beam as anti-slip protection Radio remote control for rear steering in addition to cable remote, with in

Durum: yeni, azami yük ağırlığı: 36.156 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, MAX200-N-3A-13.60-19.5-2.54 Technical Data Speed: 80 km/h Gross vehicle weight: 45,000 kg Fifth wheel load: 18,000 kg Axle load: 27,000 kg Tare weight (+/- 3%): 8,844 kg Payload approx.: 36,156 kg Platform length: 13,600 mm Loaded fifth wheel height: 950–1,050 mm Swing clearance at rear: 2,300 mm Extendable by: 3,400 mm Axle spacing: 1,360 / 1,405 mm Overall width: 2,540 mm Ibedpfxjg Sk Tve Adqjb Technical Description Load platform: Load platform in extendable design with pneumatically operated locking mechanism. 2 pairs of lashing rings (LC 5,000 daN). 1 pair of lashing rings (LC 10,000 daN). 6 pairs of fold-out lashing rings (LC 5,000 daN). 2 pairs of fold-out lashing rings (LC 10,000 daN). Cut-outs in the outer frame of the platform for attaching tension straps (LC 2,000 daN). Landing legs: JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load). Axles: SAF axles: SAF CD axles, air-suspended, with disc brakes (377 mm), with lift/lower function (ET 120). Trailing steering axles with electro-magnetic reversing lock, activated via reverse gear or manually. Axle tools (± 80 kg). Brake system: Brake system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Steel construction: Steel structure made of high-strength fine-grain steels. Steel grades: S355J2+N / S355MC (yield strength 355 MPa) S690QL / S700MC (yield strength 690 MPa) Paintwork: Premium, long-lasting corrosion protection for the standard shot-blasted welded frame ensured by a two-component (2K) zinc-rich primer. High-quality two-component (2K) topcoat, single-colour, in RAL tones of your choice. Rear section metallised and painted in RAL 9010 (pure white). Metallic paint not available. Electrical system: Electrical system according to EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connector panel with sockets 24N, 24S & 15-pin. Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Standard accessories included: Yellow-red air couplings on the galvanised front connector panel. 2 wheel chocks with holders. 2" kingpin. Galvanised steel front wall, approx. 2,200 mm high (± 105 kg), EN12642-XL compliant. Yellow reflector tape according to EU regulations; fitted along the sides, on the extension, and the rear of the trailer. European reflective warning plates (red-yellow) at the rear of the trailer. Platform with approx. 38 mm hardwood floor (± 320 kg). 10 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the platform (± 30 kg). 1 spare wheel holder under the platform, right-hand side in direction of travel. Tyres 435/50 R 19.5, manufacturer’s choice. One mud flap at the rear of the trailer. Manual and documentation on USB stick. Bracket for rotating beacon at the rear of the trailer. At the gooseneck and rear panel, left and right, brackets for warning signs, incl. socket. One transverse INOX toolbox under the platform (1,000 x 400 x 250 mm) (± 135 kg). 6 pairs of WADER container locks in the platform for 1 x 20’ container, 2 x 20’ containers or 1 x 40’ container; an additional locking position provided in the extension for a 45’ container (± 90 kg). 4 pairs of WADER container locks (± 60 kg). 10 pairs of galvanised plug-in stakes approx. 100 x 50 mm, 1,000 mm high (± 220 kg). 3 pairs of crosswise stake pocket bars mounted in the platform for plug-in stakes 100 x 50 mm (± 95 kg). Storage for 1,000 mm plug-in stakes (± 45 kg). 1 spare wh

Durum: yeni, azami yük ağırlığı: 40.017 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: > 3 aks, Üretim yılı: 2026, Technical Description Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring, 30 mm thick. Loading Area: 5 pairs of fold-out lashing rings (LC 5,000 daN). 3 pairs of fold-out lashing rings (LC 10,000 daN). 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN). Ibodpfxsw Dl Hqo Adqob Hardwood flooring approx. 48 mm thick, tread-plate covering over the axles. Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load). Tyres: Tyres 205/65 R17.5, manufacturer’s choice. TPMS: TPMS tyre pressure monitoring system in accordance with ECE R 141. Data transmission to the tractor unit is via the standardised EBS interface as per ISO 11992. For correct display, the tractor unit must be capable of transmitting and displaying this data. Axles: BPW axles: two fixed axles, two self-steering axles, air suspension, drum brakes, lifting/lowering function. The self-steering axles have electro-magnetic reverse lock, activated via reverse gear or manually. Axle tool included. Brake System: WABCO brake system compliant with EU regulations with EBS-E (4S3M), no connecting lines to the tractor unit. Electrical System: Electrical system as per EU regulations, 24 Volt LED lighting ASPÖCK-NORDIK (ASS3). All LED side marker lights synchronise with the indicator. ASPÖCK-UNIBOX on the front connection rail with 24N, 24S & 15-pin sockets. Connections in accordance with ISOs: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel Construction: Steel structure made from high-strength fine-grained steels. Steel grades: – S355J2+N/S355MC (yield strength 355 MPa) – S690QL/S700MC (yield strength 690 MPa) Paintwork: Entire steel structure automatically shot blasted after welding using a shot blasting system. Second blasting treatment with corundum for optimum adhesion of the coating system. HRM metallisation of the complete chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimal corrosion protection. Final painting: two coats of 2-pack topcoat, single-colour in a shade of choice according to the RAL 841GL system. Rear section metallised and painted in RAL 9010 (pure white). Metallic finishes not available. Paint specification tested according to salt spray test ISO 9227-NSS. Cavity sealing with special wax. Options Included: 2'' kingpin One galvanised steel front wall. Yellow-red air couplings fitted to the galvanised front connection rail. 2 wheel chocks with holders on the front wall. Mountings at the rear of the gooseneck for ALU ramps. Further options available.

Durum: yeni, azami yük ağırlığı: 36.040 kg, toplam ağırlık: 53.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Equipment excerpt. Full specification upon request. Gooseneck: * Gooseneck in SNT design to optimize the loading area length, approx. 3,750 mm long * Gooseneck hydraulically lift/lowerable and detachable * For tractor units: 6x4 or 8x4 Lowbed: * Lowbed with external beams, extendable in SUPER LOW design, approx. 8,000 mm long * Lowbed with fixed hardwood floor approx. 40 mm thick and mechanical locking * Supply lines are protected within the extendable beams and automatically adjust to the lowbed length * 7 pairs of lashing rings foldable outward (LC 10,000 daN) * 6 pairs of threaded blocks on the inner girder for mounting screw-on RUD rings Rear Undercarriage: * Rear chassis with closed outer frame and checker plate cover * Chassis with excavator trough, closed in the rear half to accommodate air tanks * 3 pairs of lashing rings foldable outward (LC 5,000 daN) * 1 pair of lashing rings foldable outward (LC 10,000 daN) * 1 pair of flat lashing rings, front and rear of the chassis (LC 10,000 daN) Axles: * BPW axles and suspension, all axles hydromechanically forced steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Tyres: * Tyres 245/70 R 17.5 3PMSF – manufacturer of choice. Load index (146/146F) Brake System: * WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: * HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection * Final coating with 2 layers of 2K topcoat, single colour in RAL 3002 Carmine Red as per RAL system 841GL Including accessories: * 2-inch king pin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings on the galvanized connection bar at the front * Remote steering from front and rear via cable remote control with push buttons, including single-track axle control (without installation in the tractor unit) * Prepared for bolt-on container positioning for 1 x 20', 1 x 40', or 1 x 45' container on the outer beams. No container locks * Hydraulic connections from gooseneck to lowbed with multi-coupling instead of screw couplings * Electro-hydraulic power unit * Spiral cable for supplying the electro-hydraulic power unit and/or electric winch (approx. 35 mm², approx. 3.5 m long, max. 250A) between semi-trailer and tractor unit with plug connection (NATO-NATO) * Yellow reflective tape to EU regulations on sides, extension and rear of the trailer * At the gooseneck and rear, left and right, a bracket for warning signs including a socket * Manual and description on USB stick * Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable guard around the pumps * 7 pairs of threaded blocks between the lashing rings under the top flange on the outer beam for mounting screw-on RUD rings VLBG-4 * 2nd ride height, approx. 50 mm above normal ride height, adjustable by hand control * On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear, galvanized plug-in stanchions are removable (body length approx. 2,560 mm) * On the gooseneck, a separate air connection with air gun Ibsdpfey Uwu Ijx Adqob * 1 stainless steel toolbox, approx. 1,350 x 400 x 400 mm, mounted externally

Durum: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2014, toplam uzunluk: 13.900 mm, toplam genişlik: 2.540 mm, süspansiyon: hava, Üretim yılı: 2014, Ek bilgiler: Marka: FAYMONVILLE Model: Telemax Yapı: platform (platform uzunluğu: 13758 - 25258 mm, uzatılabilir) Yıl: 09.2014 Şasi Numarası: YAFSR314000015733 Süspansiyon: havalı Frenler: kampanalı Ölçüler: U/G: 13900 mm / 2540 mm Ağırlıklar: dolu/boş: 75000 kg / 15810 kg UZATILABİLİR / TÜM AKSLAR DÖNEBİLİR Model yılı: 2014 Süspansiyon tipi: havalı Frenler: Kampanalı Ibsdpfxszwkp Ie Adqjb Kaldırılabilir aks: Kaldırılabilir aks Süspansiyon tipi: havalı Frenler: Kampanalı Direksiyon: Direksiyon Süspansiyon tipi: havalı Frenler: Kampanalı Direksiyon: Direksiyon = Daha fazla bilgi = Süspansiyon: havalı süspansiyon Ön aks: Kaldırılabilir aks Orta aks: Dönebilir Arka aks: Dönebilir Boş ağırlık: 12.500 kg Taşıma kapasitesi: 46.500 kg Toplam ağırlık: 59.000 kg Lütfen daha fazla bilgi için Mark Ševtšenko veya Alejandro Goyeneche ile iletişime geçin.

Durum: ikinci el, renk: kırmızı, Üretim yılı: 2016, Faymonville F-S43-1EJB. Üretim Yılı: 2016. 9 tonluk BPW akslar. Maksimum ağırlık: 45.000 kg. Çekme çubuğu yükü: 18.000 kg. EBS ABS ALB. Iedpfxezyp T Do Adqsbb NATO standardına uygun hidrolik sistem. Hidrolik süspansiyon. 9500 mm. Lastikler: 385/65R22,5, %80 durumda. ID No: 521. Heinhuis'in Genel Hüküm ve Koşulları, Heinhuis tarafından yapılan tüm reklamlar, teklifler ve fiyat listeleri, Heinhuis tarafından yapılan tüm anlaşmalar ve bu anlaşmalara yol açan müzakereler için geçerlidir. Herhangi bir şekilde verilen yanıtla, Heinhuis'in Genel Hüküm ve Koşullarının geçerliliğini kabul etmiş olursunuz ve bu Genel Hüküm ve Koşullarının içeriğini okuduğunuzu beyan edersiniz. Fiyatlarımız, ihracat için geçerli net fiyatlardır. = Daha Fazla Bilgi = Üretim Yılı: 2016 Toplam ağırlık: 45.000 kg = Şirket Bilgileri = Daha fazla bilgi için:

Durum: ikinci el, kilometre: 3.900 km, güç: 24 kW (32,63 bg), vites türü: diğer, yakıt türü: dizel, renk: sarı, boş ağırlık: 1.660 kg, ilk tescil: 01/1994, Üretim yılı: 1994, toplam genişlik: 2.020 mm, toplam yükseklik: 2.050 mm, şoför kabini: diğer, dingil mesafesi: 1.500 mm, Vehicle location: Bovenden, Iedpfsvhhl Eox Adqsbb Wheelbase: 1,500 mm; Superstructure: Truck-mounted forklift, lifting capacity 2,000 kg, Lombardini engine, lift height 2,800 mm, fork type RE4 35 1200-800, gradeability 30%, turning radius 1,560 mm. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Durum: yeni, boş ağırlık: 13.250 kg, azami yük ağırlığı: 47.550 kg, toplam ağırlık: 60.800 kg, dingil konfigürasyonu: > 3 aks, süspansiyon: hava, lastik boyutu: 245/70 r17.5, renk: gri, Donanım: ABS, Gooseneck: Gooseneck with rear taper approx. 750 mm x 10°. 3 pairs of lashing rings 30 mm thick hardwood flooring Extendable loading platform: Extendable loading platform with rear taper approx. 1,000 mm x 8° 5 pairs of outward-folding lashing rings 3 pairs of outward-folding lashing rings 1 pair of horizontal lashing rings at the front of the loading platform Cutouts in the outer frame of the platform for attaching tension straps Approx. 48 mm thick hardwood flooring, checker plate over the axles Two-piece steel ramps: One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood decking. Ramp with hydraulically folding ramp sections, hydraulic lift mechanism, and hydraulically adjustable. Maximum load per pair: 40,000 kg Landing legs: JOST landing legs (mechanical) with two-speed gearbox for 24 t lifting capacity (50 t test load) Axles and tires: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced-steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool Tires 245/70 R 17.5 Brake system: Braking system according to EU regulations with EBS-E (4S3M) without connection lines to the tractor unit Steel structure: Steel structure made of high-strength fine-grain steels Steel qualities: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a two-component (2K) zinc dust primer High-quality two-component (2K) topcoat in single-tone Nova Grey Rear section metallized and painted in RAL 9010 (pure white) No metallic paint possible Electrical system: Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: 2" king pin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings at the galvanized front connection bar 4 wheel chocks with holder at the front wall One spare wheel with holder in front of the front wall Electro-hydraulic unit Remote steering front and rear via cable remote control with push buttons and single-track axle alignment control Mount for ALU loading ramps at rear section of the gooseneck European reflector boards (red-yellow) at the rear of the trailer White reflector tape as per EU regulations on the side, extension and rear Red at the rear Iedpfx Ael Uxdkjdqebb At the gooseneck and ramps, one holder left and right for warning signs including socket Beacon holder at the rear of the trailer Galvanized folding support legs under the rear ramp of the loading area Control valves for ramps located on the right side of the trailer Cover plates to bridge the gap between ramp and loading platform One mud flap at the rear of the trailer Manual and description on USB stick BEKAMAX (Pico) central lubrication system with standard NLGI-2 grease and removable protection for the pump Plug-in ALU side and rear walls on the gooseneck approx. 2,440 x 400 mm Rear galvanized plug-in posts are removable, superstructure length approx. 2,560 mm One INOX toolbox 1,350x400x400 on the gooseneck, box covers oil fill plug 4 pairs of WADER container locks in the loading area for a

Durum: yeni, boş ağırlık: 12.300 kg, azami yük ağırlığı: 37.200 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R17.5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 30 mm thick hardwood flooring - 3 pairs of lashing rings Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system - Maximum load per pair: 30,000 kg Loading platform: - Loading platform with rear chamfer approx. 1,000 mm x 8° - Approx. 48 mm hardwood flooring, over the axles with checker plate surface Axles and tires: - BPW axles and suspension, two rigid axles, one self-steering axle - Air suspension with lift and lower valve - Self-steering axle with electro-magnetic reverse lockout, activated via reverse gear or manually - Tires 235/75 R17.5 3PMSF Accessories included: - 1 spare wheel with holder - TPMS tire pressure monitoring system according to ECE R 141 - 2" king pin - One galvanized steel headboard - Yellow-red air couplings on the galvanized connection rail at the front - 4 chocks with holders on the headboard Ibodpfx Adetvfkfeqob - Mounting at the rear of the gooseneck for ALU drive-on ramps - 3 height levels of aluminum planks - Galvanized folding supports under the chamfer of the loading platform - Height-adjustable tarpaulin frame (3,960 mm) - Galvanized headboard with tensioning mechanism for sliding curtain - Height adjustable by approx. 400 mm - Roof brand "EDSCHA" sliding forward on ALU roof rail profiles, bolted to front and rear wall - 3 pairs of sliding stakes in the loading platform - Body rear left and right hydraulically extendable by approx. 750 mm - Sliding roof with pivotable portal beam - Sliding curtain with 700 mm reserve length, with tension belts at spacing approx. 600 mm - Upper edge of structure approx. 3,960 mm high - Driving with open sliding roof is not permitted and will cause damage to the curtain - Cover plates for bridging the gap between ramps and loading platform - Electro-hydraulic unit at the rear, beneath the loading platform - At the gooseneck and at the ramps left and right each a bracket for warning panels incl. socket - Control valves for the ramps positioned on the right trailer side - 6 pairs of stake pockets for insertable stakes 100 x 50 mm in the outer frame of the loading platform - Lift axle at the front axle - Grating surface in the chamfer of the loading platform C40/4 (point load 3.4 t on an area of 20 x 20 cm) - One INOX toolbox 565 x 290 x 810 mm on the right in driving direction between the axles - On the checker plate on the gooseneck and loading platform, a painted sand layer for slip resistance - Central lubrication system BEKAMAX (Pico) with standard lubricant NLGI-2 and removable guard around the pump - Four warning panels extendable by approx. 400 mm, each approx. 423 x 423 mm, with position light - Load pressure gauge for determining axle loads including load chart - HRM metallization (High Resistance Metallization) of the outer frame - Complete steel structure shot-blasted, then visible defined surfaces hot-finished with ZINACOR 850 metallization (zinc 85% - alu 15%)

Durum: yeni, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, 3-axle MULTIMAX PLUS low-loader semi-trailer, air-suspended and hydraulically forced-steered axles. Technical Data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Speed: 80 km/h legal Gross weight: 49,500 kg or 31,500 kg Fifth wheel load: 18,000 kg Axle load: 31,500 kg Gooseneck length approx.: 3,900 mm Gooseneck width approx.: 2,480 mm Kingpin turning radius to rear approx.: 2,100 mm Coupling height when loaded approx.: 1,205 mm Loading area length approx.: 9,600 mm Extendable by approx.: (value not specified) Loading area width approx.: 2,540 mm Loading height at max load approx.: 890 mm Suspension travel approx.: -55/+145 mm Axle distance: 1,360 mm Gross weight dependent on fifth wheel load: Yes Special permit required if country-specific legal limits are exceeded. Technical Description Gooseneck: SNT design gooseneck to optimize loading platform length, approx. 3,900 mm length, with rear chamfer approx. 1,000 mm x 6°. Technical fifth wheel load: 18,000 kg. For tractor units: 4x2 and 6x2. Loading area: Loading platform approx. 9,600 mm length with rear chamfer approx. 900 mm x 6°. Section after the gooseneck is hydraulically raisable/lowerable, approx. 3,000 mm long, loadable up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS Pair of two-section AXS steel ramps, approx. 4,920 mm long and 900 mm wide. Open grating surface. Hydraulically folding ramp tips. Each ramp hydraulically shiftable approx. 235 mm outward and approx. 365 mm inward. Maximum load and ramp angle as per technical datasheet: C470319. Maximum gradient at lowered loading area: 9° Axles and Suspension: BPW axles and suspension, all axles hydro-mechanically forced-steered. Technical axle load: 12,000 kg. Air suspension with lift/lower valve. Axle tools included. Tyres: 235/75 R 17.5 3PMSF twin tyres. Brand at our discretion. Load index 143/141J (144/144F). Braking system: WABCO EBS-E braking system per EU regulations. No cables to the tractor unit. Lighting system: 24V "ASPÖCK-NORDIK full LED" lighting per EU regulations (ASS 3). Metallisation: Complete HRM (High Resistance Metallisation). Full steel structure shot-blasted, then hot-coated with ZINACOR 850 (85% zinc / 15% aluminium). Painting – 6-stage finish: - Complete steel structure shot-blasted after welding - 1 coat zinc-based primer, 1 coat adhesion primer - Top coat with 2 coats 2K acrylic paint, single colour in RAL shade of choice - Cavity sealing with special wax - Rims in silver Ijdpfx Aoizu Ntsdqsbb - Multicolour & special paint available at extra cost Steel structure: High-tensile fine-grain steels Types: S355J2+N/S355MC (yield stress 355 MPa), S690QL/S700MC (yield stress 690 MPa) Welders certified to DIN-EN 287-1, MAG welding per EN ISO 4063, M21 shielding gas as per EN ISO 14175. Front wall: Removable steel front wall, approx. 400 mm high. Supply connection strip for connections to tractor unit, fitted at outer frame profile height. ASPÖCK-UNIBOX at the front supply strip with 24N, 24S & 15-pin sockets. - 24N connection per ISO-1185 - 24S connection per ISO-3731 - 15-pin connection per ISO-12098 If your pin assignment deviates from the ISO standard, please inform us. "Anderson" socket on front supply strip: Rema 78051-00 & Amp. 150 V. Cable for the supply of the electro-hydraulic power pack and/or electric winch (35 mm²,

Durum: yeni, azami yük ağırlığı: 38.100 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: > 3 aks, yükleme alanı uzunluğu: 13.100 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 760 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5 3PMSF, renk: gri, Donanım: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Platform: 5 pairs of fold-out lashing rings on the outside 3 pairs of fold-out lashing rings on the outside 1 pair of horizontal lashing rings at the front end of the platform Cut-outs in the outer frame of the loading platform for attaching tension straps Approx. 48 mm thick hardwood flooring, checker plate flooring above the axles Landing Gears: JOST landing legs with 2-speed gearbox, lifting capacity 24 t Axles and Tyres: BPW axles, two fixed axles, two steered trailing axles, air suspension, drum brakes, raise/lower function Trailing steering axles with electro-magnetic reverse lock, activated via reverse gear or manually Axle tool Tyres 205/65 R17.5 3PMSF Brake System: WABCO brake system according to EU regulations, with EBS-E Steel Construction: High-strength fine-grained steel construction Steel Grades: S355J2+N/S355MC S690QL/S700MC Electrical Equipment: Electrical system according to EU regulations, lighting: 24 Volt ASPÖCK-NORDIK ASPÖCK-UNIBOX at the front connection panel, with 24N, 24S & 15 pin sockets Connections according to ISO Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by 2-component zinc-dust primer Premium 2-component topcoat, single colour in MB 7350 Novagrau No metallic finish possible Rear section metallized and painted RAL 9010 Accessories Included: 1 spare wheel 205/65 R 17.5 TPMS tyre pressure monitoring system according to ECE R 141 Galvanized front connection bar with yellow-red air couplings 4 chocks with holder at the front wall Mounting at rear of gooseneck for ALU loading ramps Galvanized folding supports under the loading platform’s rear chamfer Holder for a warning beacon at the rear of the trailer Height-adjustable tarpaulin superstructure Galvanized front wall with tensioning mechanism for sliding curtains Height-adjustable by approx. 400 mm Roof brand "EDSCHA" sliding forward on ALU roof support profiles, screwed front and rear walls On platform: 3 pairs of adjustable stanchions Rear of superstructure can be hydraulically widened left and right by approx. 750 mm Sliding roof with upward swinging portal beam Sliding tarpaulin with 700 mm length reserve, securing straps at approx. 600 mm intervals Height upper edge of superstructure approx. 3,960 mm Driving with open sliding roof is not permitted and will damage the tarpaulin Suspension rail for ALU loading ramps at the rear of the vehicle At the gooseneck and at the left and right rear panel: each with a bracket for warning boards including socket Mudflap at the rear of the trailer European reflector boards at the rear of the trailer 7 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform Lift axle on the front axle with TEBS E control, depending on current axle load and loading status Rear of superstructure with closed ALU wing doors Anti-slip sand finish painted on checker plates on gooseneck and platform Central lubrication system BEKAMAX, standard grease NLGI-2, removable protective cover for pump 80 km/h speed sticker at rear and on both sides Iodpfxstphtme Adqsbb Load gauge for axle load determination including load chart

Durum: yeni, boş ağırlık: 17.500 kg, azami yük ağırlığı: 43.500 kg, toplam ağırlık: 61.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.550 mm, yükleme alanı genişliği: 2.750 mm, yükleme alanı yüksekliği: 400 mm, lastik boyutu: 245/70 R 17.5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimizing the loading platform length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and removable - For tractor units: 6x4 or 8x4 Lowbed: - Lowbed with external beams, extendable version, “SUPER LOW” design, length approx. 7,550 mm - Lowbed with fixed hardwood floor, approx. 40 mm thick, and mechanical locking - Supply lines routed protected inside the extendable beams and automatically adjust to the respective lowbed length Rear running gear: - Rear running gear with closed outer frame, chequer plate covering, and continuous prism-shaped excavator recess, approx. 1,450/900 x 505 mm, open at rear - 2 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame Axles and tyres: - “PENDLE-AXLE”, all axles forced-steered by hydromechanics - Burst protection valve on axle compensation cylinder with automatic RESET feature - Hydraulic cylinders with shut-off valves and locking pins for securing in raised position - Technical axle load: 12,000 kg - Hydraulic axle compensation - 245/70 R 17.5 tyres / 3PMSF Accessories included: - Prepared for mounting attachable container positions for 1x 20ft or 1x 40ft container on the outer beams - 2'' king pin Ibedpfx Ash Hm Thjdqob - One galvanized steel front wall approx. 400 mm high - One spare wheel with bracket - At the galvanized front connection strip: yellow-red air couplings - 4 wheel chocks - Remote steering from front and rear by cable remote control with push buttons, including track alignment monitoring for the axles - Hydraulic couplings from gooseneck to lowbed with multi-coupling system instead of screw couplings - Electro-hydraulic unit - White reflector tape according to EU regulations on the sides, extension, and red at the rear - 2 wooden blocks 500x250x200 mm - European reflector plates (red-yellow) at the rear of the trailer - On the gooseneck and rear panel, left and right, one bracket each for warning panels including socket - Central lubrication system with 2 BEKAMAX (Pico) pumps for NLGI-2 standard grease - Load pressure gauge to determine axle loads, including load chart - On the gooseneck, plug-in ALU side and rear walls approx. 2,000 x 400 mm - The rear galvanized plug-in posts are removable (body length approx. 2,120 mm) - Separate air connection with air gun on the gooseneck - Duomatic air coupling from gooseneck to lowbed - Gooseneck closed at the rear upper section with a removable cover - 1 pair of steel ramps to bridge the mountings of the lowbed - Four extendable warning signs approx. 423 x 423 mm, extendable by approx. 400 mm - Radio remote control for the steering in addition to the cable remote, with indicator lights on receiver for track monitoring - 6 pairs of threaded blocks between lashing rings under the top chord on the outer beam for mounting screwable RUD rings VLBG-4 - 7 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the loading platform - Folding extensions, approx. 230 mm per side - Anti-slip sand layer painted on the loading platform - Dipper recess on the rear running gear closed at the front and rear with plug-in plates - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, then the defined visible surfaces hot-finished with ZINACOR 850 metallization (Zinc 85% - Alu 15%)