Kullanılmış Meusburger 3-Achs-Tele-Semi-1P. Radmul.-Hydr.rampen satın al (47.867)

Koşul: yeni, boş ağırlık: 9.800 kg, azami yük ağırlığı: 39.200 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 9.800 kg, Donanım: ABS, Chassis: - Robust welded steel frame construction with front frame cranking and level loading area with rear chamfer approx. 500x100 mm - Neck of frame 200 mm with beveled corners at the front - Slanted end goose neck approx. 500 x 100 mm (traction cleats on outer frame in the area of the rear chamfer) - 2 kingpin positions with replaceable 2” kingpin - Outer frame closed to the outside as a perforated outer frame - Load floor with extendable central frame, extendable by approx. 2,000 mm, lockable pneumatically in 500 mm increments - Frame in front of and after separation with 80x80 mm step - Reinforced frame design / point load in retracted state at center of gravity - Without extendable load area wideners, but prepared for subsequent installation (guide tubes welded into the frame) - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting about at the 2nd axle to the rear of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm - Underrun protection = extended end plate - Drop supports at the rear Ramps: - 2 pcs. 2-part special-design drive-on ramps with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting system (only in conjunction with electrohydraulic unit) - Width approx. 800 mm - Wooden deck Giodpfxsxgm S Do Actet - Incl. traction cleats on ramps - Secured in driving position with lashing straps - Operated via control lever mounted at rear right in FR - Lateral hydraulic displacement Floor: - 35 mm larch timber floor with aluminum omega profiles Landing Gears: - Mechanical support legs, 24 t, with single-sided operation and push-balanced Axles, Steering and Tyres: - BPW air suspension axles, 10 t axle load each, airbag diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lift and lowering device with total stroke approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired via EBS), automatic actuation with mechanical emergency actuation via button on the trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center-mount offset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Incl. tire pressure monitoring Accessories: - Removable side walls and rear wall on the gooseneck, approx. 400 mm high - Spare wheel carrier - Lateral aluminum collision protection - 4 wheel chocks - 1 ECE board at the rear, plug-in - 11 pairs of ZK modules 10 t side-mounted: - 2x on the gooseneck - 2x on the loading area before the extension - 7x after the extension - Extendable warning signs including 3 position lamps each, at the front on the landing legs and at the rear in front of the end plate, infinitely extendable up to a loading width of 4,500 mm - 4 holders for warning panels, plug-in, in stake pockets on loading area - 6 pairs of stake pockets on the side for plug-in stakes 100x50 mm - 2 transverse rows of stake pockets for plug-in stakes 100x50 mm on the gooseneck from outer frame to main frame (1x before and 1x after kingpin positions) - 3 transverse rows of stake pockets for plug-in stakes 100x50 mm on loading area from outer frame to main frame (1x before extension, 1x after extension and 1x after 3rd axle) - 2 pairs of steel plates on the loading area for container locks to accommodate 1x 20ft container - Rubber skirt mounted on underrun protection

Koşul: yeni, boş ağırlık: 9.400 kg, azami yük ağırlığı: 39.600 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 9.400 kg, Donanım: ABS, Chassis: - Robust welded steel frame structure with a front frame offset and flat loading platform with rear bevel, approx. 500x100 mm - Neck of frame 200 mm with chamfered front corners - Beveled end swan neck approx. 500 x 100 mm (tread ribs on the outer frame in the area of the rear bevel) - 2 king pin positions with interchangeable 2” king pin - Outer frame closed to the outside as perforated outer frame - Loading platform with extendable central frame, extendable by approx. 2,000 mm, lockable every 500 mm pneumatically - Frame before and after partition with 80x80 mm step - Reinforced frame version / point load in retracted position at the center of gravity - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after the 2nd axle to the end of the vehicle - 1 pair wheel wells between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm - Underrun protection = extended end plate - Drop legs at the rear Ramps: - 2 single-piece aluminum loading ramps, special design with spring lift system - Length x width approx. 2,500 mm x 600 mm - Can be secured for transport with lashing straps - Laterally manually adjustable Axles, steering, and tires: - BPW air suspension axles, each with 10 t axle load, airbag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering device with total stroke approx. 200 mm - 2nd driving position via ball valve +50 mm - 1st axle lift axle (wired via EBS), fully automatic confirmation with mechanical emergency activation via push button on the trailer - 3rd axle as friction-steered trailing axle with electrical and mechanical lock - 12 steel disc wheels, 10-hole, with center offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Includes tire pressure monitoring Floor: - 35 mm larch wood floor with aluminum omega profiles Gjdpfxoxnym Ds Actoit Landing gears: - Mechanical 24 t landing gears with one-sided operation and thrust compensation Paintwork: - Steel shot blasting, sprayed zinc coating and priming of the chassis - Painting of chassis/wheel hubs/outer frame in DB 7350 Nova Grey - Reflective tape on sides and rear in yellow Accessories: - Removable sideboards and rear wall on the swan neck, approx. 400 mm high - Spare wheel holder - Lateral aluminum side impact protection - 4 wheel chocks with holder - Long license plate holder on the end plate - 1 ECE sign at the rear, plug-in type - 11 pairs of ZK modules 10 t on the side: - 2x on the swan neck - 2x on the platform before extension - 7x after extension - Extendable warning boards incl. 3 position lights each, at the front at landing gears and at the rear in front of the end plate, steplessly extendable up to loading width of 4,500 mm - 4 plug-in warning board holders in stanchion pockets on the loading platform - 6 pairs of stanchion pockets on the side for plug-in stanchions 100x50 mm - 2 cross rows of stanchion pockets for plug-in stanchions 100x50 mm on the swan neck from the outer frame to the main frame (1x before and 1x after the king pin positions) - 3 cross rows of stanchion pockets for plug-in stanchions 100x50 mm on the loading platform from the outer frame to the main frame (1x before extension, 1x after extension, and 1x behind the 3rd axle) - 2 pairs of steel plates in the platform for container locks to accommodate 1x 20ft container - Rubber apron mounted on underrun protection

Koşul: ikinci el, boş ağırlık: 8.900 kg, azami yük ağırlığı: 40.100 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2025, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, Üretim yılı: 2025, Donanım: ABS, With every used semi-trailer, you receive a current and complete inspection and functional report. Chassis: - Robust steel frame welded construction with front frame neck and flat loading area with rear taper approx. 500x100 mm - Neck height 200 mm with chamfered front corners - Inclined goose neck end approx. 500 x 100 mm (climbing ribs along the outer frame in the rear taper area) - Two kingpin positions with exchangeable 2” kingpin - Outer frame closed outward, constructed as a slotted outer frame - Loading platform with extendable central beam, can be extended by approx. 2,000 mm, pneumatically lockable at 500 mm intervals - Frame before and after division with 80x80 mm step - Reinforced frame design / point load in retracted position at the center of gravity - No extendable load bed wideners, but prepared for retrofitting (= guide tubes welded into frame) - With excavator trough (without cover), approx. 220 mm deep, 600 mm wide, starting after the 2nd axle to the end of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), approx. 400 mm deep - Underrun protection = extended end plate - Drop leg supports at rear Floor: - 35 mm larch timber flooring with aluminum omega profiles Axles, steering, and tires: - BPW air suspension axles, 10 to axle load each, air spring diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering system with total stroke approx. 200 mm - Second driving position via ball valve +50 mm - First axle as lift axle (wired via EBS), fully automatic activation with manual emergency actuation via push button on the trailer - Third axle as friction-steered trailing axle with electric and mechanical locking - 12 steel disc wheels, 10-bolt, hub-centered Gijdpfx Aoywv Ixsctst - 12 tires, 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring system Accessories: - Plug-in side boards and rear board on the gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminum impact protection - 4 wheel chocks with holder - Elongated number plate holder in end plate - 1 ECE insertable reflector board at rear - 11 pairs of 10t side ZK lashing modules: - 2x on the gooseneck - 2x on the platform before extension - 7x after extension - No rear towing eyes - Extendable warning boards including 3 position lamps each at the front at the landing gear and rear before the end plate, steplessly extendable to loading width of 4,500 mm - 4 insertable sockets for warning boards in stakes pockets on the platform - 6 pairs of side stake pockets for 100x50 mm stake inserts - 2 rows of cross stake pockets for 100x50 mm stakes on the gooseneck from outer frame inward to main frame (1x before and 1x after kingpin positions) - 3 rows of cross stake pockets for 100x50 mm stakes on the load platform from outer frame inward to main frame (1x before extension, 1x after extension, and 1x after 3rd axle) - 2 pairs of steel plates in the platform for container locks to accommodate one 20ft container - Rubber apron mounted on underrun protection - Preparation (= cable routing for NATO cable and drilling pattern for later installation of NATO socket at the front end plate, as well as holder on the vehicle) for retrofitting electrohydraulic power unit on the right rear, for possible control of loading ramps Optional: The trailer is available with aluminum approach ramps.

Koşul: yeni, boş ağırlık: 8.900 kg, azami yük ağırlığı: 40.100 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 8.900 kg, Chassis: - Robust welded steel frame construction with front frame downturn and flat loading area, rear chamfer approx. 500x100 mm - Neck of the frame: 200 mm with beveled front corners - Sloped end of gooseneck approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear bevel) Giedpsxnnk Dsfx Actet - 2 king pin positions with replaceable 2” king pin - Outer frame closed on the outside as a perforated outer frame - Loading platform with extendable central beam, extendable by approx. 2,000 mm, lockable pneumatically in steps of 500 mm - Frame before and after extension section with 80x80 mm step - Reinforced frame design / point load optimized in retracted state at the center of gravity - No extendable widening elements in the loading area, but prepared for retrofitting (guide tubes welded in frame) - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle and extending to the rear end of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm - Underrun protection: extended end plate - Drop down support legs at the rear Axles, Steering, and Tyres: - BPW air suspension axles, each with 10 t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering device with total lift approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired to EBS), automatic confirmation with manual emergency operation via button on the trailer - 3rd axle is a friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, with hub-centred offset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Tire pressure monitoring included Accessories: - Removable side and rear boards on gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminium underride protection - 4 wheel chocks with holders - Elongated license plate bracket on end plate - 1 removable ECE sign at the rear - 11 pairs of ZK modules 10t at the sides: - 2x on the gooseneck - 2x on the loading area in front of the extension - 7x after the extension - Extendable warning panels incl. 3 position lamps each, at front on landing gears and rear before end plate, steplessly extendable to a load width of 4,500 mm - 4 holders for warning panels, mountable in stake pockets on the loading area - 6 pairs of side stake pockets for stakes 100x50 mm - 2 rows of transverse stake pockets for stakes 100x50 mm on gooseneck, from outer frame inwards to main frame (1x before and 1x after king pin positions) - 3 rows of transverse stake pockets for stakes 100x50 mm on loading area, from outer frame inwards to main frame (1x before the extension, 1x after the extension, 1x after 3rd axle) - 2 pairs of steel plates in loading area for container locks suitable for 1x 20ft container - Rubber skirt fitted to underrun protection The trailer is optionally available with ramps.

Koşul: ikinci el, boş ağırlık: 10.000 kg, azami yük ağırlığı: 39.000 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2025, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, Donanım: ABS, hidrolik arka platform, For every used semi-trailer, you receive a current and complete inspection and function report. Chassis: - Robust steel frame welded construction with front frame step-down and level loading area, rear taper approx. 500x100 mm - Frame neck 200 mm with beveled corners at the front - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear taper) - 2 king pin positions with replaceable 2" king pin - Outer frame closed outward as perforated side member - Loading area with extendable central frame, extendable by approx. 2,000 mm in 500 mm increments, pneumatically lockable - Frame before and after division with step 80x80 mm - Reinforced frame version / point load at the center of gravity in retracted position - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle up to end of vehicle - 1 pair of wheel recesses between 1st and 2nd axle steel covers (covers with Körapur coating), depth approx. 400 mm Ramps: - 2 pieces, 2-part loading ramps special design with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting system (only in conjunction with electro-hydraulic unit) - Width approx. 800 mm - Wooden flooring - Inclined ribs on ramps - Fixable in driving position with tension belts - Operated by control lever, mounted at the rear right in the control box - Hydraulically laterally adjustable Flooring: - 35 mm larch wood floor with aluminum omega profiles Axles, steering, and tires: - BPW air suspension axles, each 10 t axle load, air bellows diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lift and lower device with total stroke approx. 200 mm Gjdpfx Acoxxl E Hstjit - 2nd driving level via ball valve +50 mm - 1st axle: lift axle (wired via EBS), confirmation fully automatic with mechanical emergency control via push button on the trailer - 3rd axle as steering trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, with mid-offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Accessories: - Removable side and rear walls on the gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminum underrun protection - 4 wheel chocks including holders - Elongated license plate holder in the rear panel - 1 removable ECE plate at rear - 11 pairs ZK-modules 10t on the side: - 2x on the gooseneck - 2x on the loading platform before the extending frame - 7x after the extending frame - Extendable warning boards including 3 position lamps each, at the front on landing gear and rear before rear panel; steplessly extendable up to a loading width of 4,500 mm - 4 holders for plug-in warning boards in stake pockets on the loading platform - 6 pairs of side stake pockets for 100x50 mm stakes - 2 rows of cross stake pockets for 100x50 mm stakes on gooseneck from outer frame inwards to main frame (1x before, 1x after king pin positions) - 3 rows of cross stake pockets for 100x50 mm stakes on loading platform from outer frame inwards to main frame (1x before the extension, 1x after the extension, and 1x behind 3rd axle) - 2 pairs of steel plates in the loading area for container locks to accommodate 1x 20ft container

Koşul: yeni, boş ağırlık: 8.950 kg, azami yük ağırlığı: 40.050 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 8.950 kg, Donanım: ABS, Chassis: - Robust welded steel frame construction with a cranked front section and level loading area, with rear tapering approx. 500x100 mm - Neck height 200 mm with chamfered corners - Tapered end swan-neck approx. 500 x 100 mm (anti-slip ribs on outer frame in area of rear taper) - 2 king pin positions, replaceable 2" king pin - Closed outer frame with perforated outer profile for lashing with tension straps - Reinforced frame design / point load in center of gravity - Preparations for extendable loading area wideners - With excavator trough, approx. 220 mm deep, approx. 600 mm wide, extending approx. from after second axle to end of vehicle - 1 pair of wheel recesses in front of axle with steel covers - (Covers coated with Körapur), approx. 400 mm deep, and 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Rear underride guard = extended end plate - Drop supports at rear Ramps: Godpfowu Agisx Actsit - 2 single-piece aluminum drive-on ramps with spring-assisted lifting function - Length x width approx. 2,500 mm x 600 mm - Lockable in transport position using tension straps - Manually sideways adjustable Floor: - 35 mm larch wood floor with aluminum omega profiles Landing Gears: - Mechanical 24t landing gears, one-side operation with load compensation Axles, Steering and Tires: - BPW air suspension axles, 10t axle load each, air bag diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake pads - Automatic slack adjuster - Lifting and lowering device, total stroke approx. 200 mm - 2nd ride height via ball valve +50 mm - 1st axle with lift function (wired via EBS), fully automatic confirmation with mechanical emergency actuation via push button on trailer - 3rd axle as friction-steered trailing axle with electrical and mechanical lock - 12 steel disc wheels, 10-hole, centered offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Incl. tire pressure monitoring Brake System: - Dual-circuit brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Air connections yellow / red Painting: - Steel shot blasting, spray galvanizing of frame and primer - Painting chassis/wheel hubs/outer frame in DB 7350 Nova Grey - Plastic parts black, unpainted - Rims: factory silver - Reflective tape side and rear in yellow Accessories: - Plug-in side and rear boards on the swan neck, approx. 400 mm high - Spare wheel holder - Aluminum docking protection - 4 wheel chocks - Sheet metal mudguards with Clear-Pass - Elongated license plate holder in end plate - 1 plug-in ECE panel at rear - 11 pairs of ZK modules 10t side: - 2x on the swan neck - 9x on the loading platform - Without rear tow rings - Extendable warning signs incl. 3 position lights each, front at landing gears and rear before end plate, infinitely extendable up to loading width 4,500 mm - 4 holders for warning signs, insertable into stake pockets on loading platform - 6 pairs of stake pockets on the side for insertable stakes 100x50 mm - 2 rows of transverse stake pockets for insertable stakes 100x50 mm on swan neck from outer frame towards main frame (1x before and 1x after king pin positions) - 3 rows of transverse stake pockets for insertable stakes 100x50 mm on the loading platform from outer frame towards main frame (1x front, 1x before 1st axle, and 1x after 3rd axle) - 2 pairs of steel plates in the loading area for container locks to accommodate 1x 20ft container - Rubber apron mounted on underride guard

Koşul: yeni, boş ağırlık: 10.100 kg, azami yük ağırlığı: 38.900 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 245/70 R 17,5, işletme ağırlığı: 10.100 kg, Donanım: ABS, Chassis: - Robust steel frame weldment with front frame cranking and flat loading surface with rear tapering approx. 500x100 mm - Neck of frame 200 mm with chamfered corners - Tapered end of gooseneck approx. 500 x 100 mm (anti-slip ribs on outer frame in the rear taper area) - 2 king pin positions with replaceable 2" king pin - Outer frame closed on the outside, perforated profile for lashing with tension straps (chains not possible) - Reinforced frame version / point load at centre of gravity - Provisions for extendable widening devices in the loading area - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle up to rear end - 1 pair of wheel recesses in front of axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm, as well as 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Rear underrun protection = extended end plate Giedpfxowviwko Actot - Drop-down supports at the rear Ramps: - Two-part loading ramps, special version with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting device (only in combination with electro-hydraulic power pack) - Width approx. 800 mm - Timber surface - Incl. anti-slip ribs on the loading ramps - Secured in travel position with tension straps - Operation via control lever mounted at the rear, right in direction of travel - Laterally hydraulically adjustable Floor: - 35 mm larch floorboards with aluminium omega profiles Landing Gear: - Mechanical 24t landing legs with single-side operation and push compensation Axles, Steering and Tyres: - BPW air suspension axles, each with 10t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering mechanism with total lift approx. 200 mm - 2nd driving height via ball valve +50mm - 1st axle lift axle (wired via EBS), operation fully automatic with mechanical emergency actuation via button on the trailer - 3rd axle as friction steered trailing axle with electrical and mechanical lock - 12 steel disc wheels, 10-hole, with mid-offset centering - 12 tyres 245/70 R 17.5 143/141J, tubeless - Including tyre pressure monitoring Accessories: - Plug-in side and rear boards on the gooseneck, approx. 400 mm high - Spare wheel mounting - Lateral aluminium side impact protection - 4 wheel chocks - Elongated number plate holder in the end plate - 1 ECE panel insertable at the rear - 11 pairs of ZK modules 10t lateral: - 2x on the gooseneck - 9x on the loading surface - Steel mudguards with clear-pass - Slidable warning panels including 3 position lamps each, at the landing legs in front and behind the end plate, continuously extendable up to loading width of 4,500 mm - 4 removable holders for warning panels plug-in into stake pockets on the loading surface - 6 pairs of side stake pockets for 100x50 mm stakes - 2 rows of transverse stake pockets for 100x50 mm stakes on the gooseneck from outer frame to the main frame (1x in front of and 1x behind king pin positions) - 3 rows of transverse stake pockets for 100x50 mm stakes on the loading surface from outer frame to main frame (1x front area, 1x in front of 1st axle, 1x behind 3rd axle) - 2 pairs of steel plates in loading surface for container locks to accommodate 1 x 20ft container - Rubber flap fitted on underrun protection - Steel shot blasting, chassis hot-dip galvanized and primed - Chassis/wheel hubs/outer frame painted DB 7

Koşul: yeni, boş ağırlık: 8.490 kg, azami yük ağırlığı: 40.510 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 8.490 kg, Donanım: ABS, Chassis: - Robust welded steel frame construction with front frame drop and level loading area, rear taper approx. 500x100 mm - Neck height 200 mm with beveled corners - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area of the rear taper) - 2 king pin positions with interchangeable 2” king pin - Outer frame closed on the outside as a perforated outer frame for lashing with tie-down straps - Reinforced frame design / point load at the center of gravity - Prepared for extendable load width extensions - With excavator recess (open type), depth approx. 220 mm, width approx. 600 mm, beginning just after 2nd axle to end of vehicle - 1 pair of wheel recesses in front of axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm, as well as 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Rear underrun protection = extended end plate - Drop-leg stabilizers at rear Floor: - 35 mm larch wood floor with aluminum omega profiles Axles, Steering, and Tires: - BPW air suspension axles, each with 10 t axle load, air bellow diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lift and lowering mechanism, total travel approx. 200 mm - 2nd ride height setting via ball valve +50 mm - 1st axle lift axle (wired via EBS), confirmation fully automatic with mechanical emergency operation via pushbutton on trailer - 3rd axle is a friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, with centered offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Brake System: - Dual-line brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Air connections yellow / red Paintwork: - Steel shot blasting, chassis spray galvanizing and priming - Painting of chassis/hub/outer frame in DB 7350 Novagrau Accessories: - Removable drop sides and tailboard on gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminum underrun protection - 4 wheel chocks - Metal mudguards with Clear-Pass - Long number plate holder integrated in end plate - 1 removable ECE plate at rear - 11 pairs of ZK-modules 10t side-mounted: Gisdpfxswu A Sle Actet - 2x on the gooseneck - 9x on the loading area - Without rear towing eyes - Extendable warning signs incl. 3 position lamps each, at the front at landing gear and rear before end plate, infinitely extendable to a loading width of 4,500 mm - 4 holders for warning signs, insertable in stake pockets on loading area - 6 pairs of side stake pockets for insertable stanchions 100x50 mm - 2 cross rows of stake pockets for insertable stanchions 100x50 mm on gooseneck, from outer frame to main frame (1x before and 1x after king pin positions) - 3 cross rows of stake pockets for insertable stanchions 100x50 mm on loading area, from outer frame to main frame (1x at the front area, 1x before 1st axle, 1x after 3rd axle) - 2 pairs of steel plates in loading area for container locks to accommodate one 20ft container - Rubber apron mounted on underrun protection - Preparation (wiring for NATO cable and hole pattern for retrofit installation of NATO socket at front of end plate and bracket on vehicle) for subsequent installation of an electrohydraulic unit on the right rear side for possible ramp operation - Mechanical landing legs 24t, single-sided operation with load compensation Optionally, the trailer is available with aluminum approach ramp

Koşul: ikinci el, boş ağırlık: 14.350 kg, azami yük ağırlığı: 48.650 kg, toplam ağırlık: 63.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Üretim yılı: 2025, Donanım: ABS, With every used semi-trailer, you will receive a current and comprehensive inspection and functional report. Gooseneck: - Gooseneck in SNT design for optimized loading area length, length approx. 3,700 mm - Rear of gooseneck tapered approx. 1,000 mm x 10° Loading area: - Extendable loading area, length approx. 8,800 mm, with tapered end at the rear approx. 500 mm x 10° - One recess in the loading platform as well as into the tapered section to accommodate the excavator bucket arm Ramps: - 1 pair of two-section steel ramps, length approx. 4,350 mm and width approx. 900 mm - Ramps with hardwood surface Godpfxeyrfn No Acteit - Hydraulically foldable ramp tips - Ramps can be hydraulically shifted individually approx. 235 mm outwards and approx. 215 mm inwards - Square climbing bars 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle friction-steered, all other axles forced steered (hydromechanical) - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift/lower valve - Tyres: 235/75 R 17.5 - TPMS tyre pressure monitoring system Included accessories: - Removable steel front wall, approx. 400 mm high - 3kW electro-hydraulic unit for hydraulic control (excluding hydraulic winches) - Park position on the gooseneck for warning panels when not in use - 1 spare wheel - Outer carrier on the gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings in the rear section of the gooseneck - On the gooseneck: 1 pair of plug-in ALU side walls, approx. 400 mm high, anodized - On the gooseneck: 1 plug-in ALU rear wall, approx. 400 mm high, anodized - Over the gooseneck: approx. 40 mm thick hardwood flooring, over the kingpin area – checker plate covering - 2" kingpin - Guide plate from gooseneck for the fifth-wheel coupling plate, approx. 500 mm wide - Round NATO socket on front connection panel - 4 wheel chocks - Mechanical landing legs with 2-speed gearbox and crank - Continuous hardwood flooring, approx. 50 mm thick on the loading area, interrupted between axles - Load platform lock with conically welded locking profiles every 250 mm - Including pre-load plate - 1 intermediate table, approx. 300 mm wide, for the sliding tube with large cross-section, intermediate table with lowered platform and extendable hanging rails for aluminum bridging elements - 1 pair of lashing rings on the front crossmember - 8 pairs of recessed folding lashing rings in the outer frame of the loading area - Extending (galvanized) side extensions, approx. 230 mm per side - Wheel recesses with square climbing bars, 15 x 15 mm, open from front up to the gooseneck crossmember, approx. 700 x 410 mm - Aluminum covers for wheel recesses, which can also be used as bridging elements for the extension or as extension planks - Aluminum elements lockable on the extension tubes of the widenings - Widenable U-profiles for the placement of aluminum covers - Wheel recesses with square climbing bars, 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - 1st axle with automatic lift axle function - 4 warning panels, approx. 423 x 423 mm - Radio and cable remote control

Koşul: ikinci el, boş ağırlık: 15.550 kg, azami yük ağırlığı: 47.450 kg, toplam ağırlık: 63.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 11/2024, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, Üretim yılı: 2024, Donanım: ABS, For every used semitrailer, you will receive a current and comprehensive inspection and functional report. Gooseneck: - Gooseneck in SNT design for optimized loading area length, approx. 3,700 mm long - Gooseneck rear with chamfer, approx. 1,000 mm x 10° Loading area: - Extendable loading platform, approx. 8,800 mm long, with rear chamfer approx. 500 mm x 10° - A recess in the loading platform, including into the chamfer, for accommodating the excavator bucket arm - Pneumatic locking system with conical locking pins and reinforced locking positions - Hardwood flooring on the loading platform chamfer Ramps: - 1 pair of two-part steel ramps, approx. 4,350 mm long and approx. 900 mm wide - Ramps laminated with hardwood - Hydraulically foldable ramp tips - Ramps can be hydraulically moved individually approx. 235 mm outward and approx. 215 mm inward - Square serrated crossbars 20 x 30 mm, every approx. 200 mm on the outer frame of the ramp Axles and suspension: - BPW axles and suspension, first axle self-steering, all other axles hydromechanically forced steering - Technical axle load: 12,000 kg - Air suspension - Tyres 235/75 R 17.5 - TPMS tyre monitoring system - TPMS tyre sensors Accessories included: - Removable front wall, steel, approx. 400 mm high - 3kW electro-hydraulic power unit for hydraulic operations - 1 spare wheel - External beams of the gooseneck with mounting holes for bolt-on lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings at the rear of the gooseneck - On the gooseneck: 1 pair of plug-in ALU sidewalls, approx. 400 mm high, anodized - On the gooseneck: 1 plug-in ALU rear wall, approx. 400 mm high, anodized - 2" king pin Giedpjypb Akjfx Actst - Round NATO socket at the front connection bar - 4 wheel chocks - Mechanical landing legs with 2-speed gearbox and crank - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross member - 8 pairs of recessed, foldable lashing rings in the outer frame of the loading area - Expandable (galvanized) extensions up to approx. 230 mm per side - Wheel recesses with square serrated strips, 15 x 15 mm, continuously open ahead of the axles up to the gooseneck cross member, approx. 700 x 410 mm - ALU covers for wheel recesses - ALU elements lockable on the extension tubes of the width extensions - Expandable U-profiles for ALU covers - Wheel recesses with square serrated strips, 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - ALU elements lockable on the extension tubes of the width extensions - 1 pair of mechanical rear supports - Rear steering operable from front and rear via cable remote control, with axle tracking control - 1st axle with automatic lift axle function and starting aid in accordance with EU Directive 2021/535 - Under the gooseneck and at the rear crossbar left and right, each with a 7-pin socket with holder for warning boards - Square serrated strips 20 x 30 mm, every approx. 200 mm on the outer frame of the loading platform chamfer - Central lubrication system with 1 pump, brand BEKAMAX - Radio remote control for rear steering, in addition to cable remote - Wabco Smart Board system - 4 extendable warning boards, approx. 423 x 423 mm, extendable by approx. 400 mm

Koşul: yeni, boş ağırlık: 15.550 kg, azami yük ağırlığı: 47.450 kg, toplam ağırlık: 63.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimizing loading platform length, approx. 3,700 mm long - Rear gooseneck with bevel, approx. 1,000 mm x 10° Loading Platform: - Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10° - A recess in the loading platform as well as into the bevel for accommodating the excavator bucket arm - Pneumatic locking with conical locking bolts and reinforced locking positions - Hardwood flooring on the bevel of the loading platform Godpfx Ajk Aht Ujctsit Ramps: - 1 pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide - Ramps with hardwood covering - Hydraulically foldable ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward - Square climbing strips 20 x 30 mm, at approx. 200 mm intervals on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, first axle steerable, all other axles hydro-mechanically forced steered - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse lock, activated automatically in reverse gear and manually - Air suspension with lift and lower valve - Tires: 235/75 R 17.5 twin tires - TPMS tire monitoring system compliant with ECE R141 - TPMS tire sensors installed in all wheels, including spare wheels Accessories included: - Detachable front wall, steel, approx. 400 mm high - 3kW electro-hydraulic power unit for operating hydraulic functions, except hydraulic cable winch - Parking bracket for warning signs on gooseneck when not in use - 1 spare wheel - On the gooseneck: 1 pair of detachable ALU side boards, approx. 400 mm high, anodized - On the gooseneck: one detachable ALU rear board, approx. 400 mm high, anodized - Over the gooseneck: approx. 40 mm thick hardwood covering, checker plate covering above king pin - 2'' king pin - Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide - 4 wheel chocks - Mechanical landing gear with two-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - 1 intermediate table, approx. 300 mm wide - Telescopic width extensions (galvanized) approx. 230 mm per side - Wheel recesses with square climbing strips - ALU covers for the wheel recesses - 1 pair of mechanical rear supports - Remote steering from front and rear via cable remote control, with single track axle monitoring - 1st axle with automatic lifting axle function - Central lubrication system with 1 pump, BEKAMAX brand - Wireless remote control for remote steering, in addition to cable remote, with 2 indicator lights on receiver for single track monitoring - Wabco Smart Board System - 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for beacon

Koşul: ikinci el, boş ağırlık: 11.200 kg, azami yük ağırlığı: 36.800 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2025, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, Üretim yılı: 2025, Donanım: ABS, With every used semi-trailer, you receive a current and complete inspection and functionality report. Gooseneck: - Gooseneck with rear taper approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood floor Extendable loading area: - Telescopic loading area with rear bevel approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square rungs as climbing bars and widening in the lower area - Between the 1st and 2nd axle, one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - Incl. 3-piece removable galvanized covers above the wheel recesses (W 670 mm) – max. point load 5 t per cover - Recess in the bevel and extending into the loading area for the excavator bucket arm approx. 2,900 x 750 x 210/290 mm - 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator arm recess (LC 5,000 daN) - Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) Ramps: - One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with 48 mm thick hardwood covering - Ramp with hydraulically foldable ramp sections, hydraulic lifting mechanism, and hydraulic side shift - Maximum load per pair: 40,000 kg Axles and tires: - BPW axles and suspension, 2 fixed axles, 1 trailing steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tools - TPMS tire pressure monitoring system as per ECE R 141 - Tires: 235/75 R17.5 3PMSF Accessories included: - On the gooseneck and at the rear, left and right, each with a bracket for warning signs, including socket - One spare wheel with holder in front of the front wall - 2" king pin - One galvanized steel front wall approx. 400 mm high - Yellow-red air couplings on the galvanized connection rail at the front - 4 wheel chocks with holder - Galvanized, extendable width extensions approx. 230 mm per side - Galvanized folding supports beneath the loading area bevel - Cover plates to bridge the gap between ramps and loading area - White reflective tape in accordance with EU regulations on the sides and on the extension; rear in red - Electro-hydraulic unit at rear, under the loading area - European reflective signs (red-yellow) at the rear of the semi-trailer - Four extendable warning signs approx. 423 x 423 mm each with a position light, extendable by about 400 mm - Bracket for beacon on the warning signs - On the gooseneck, plug-in ALU side and rear boards approx. 2,440 x 400 mm - The rear, galvanized plug-in stanchions are removable (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the loading area for one 20ft or 30ft container Godeyylduopfx Actsit - 3 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading surface - One removable, galvanized intermediate table with 1 pair of WADER container pockets - 20 x 20 mm square climbing bars every 200 mm on the outer frame of the loading area bevel - On the checkered plates on the gooseneck and the loading area, painted-on sand layer as slip protection - Speed sticker 80 km/h at the rear and on both sides - Load gauge for determining axle loads, including load chart

Koşul: yeni, boş ağırlık: 11.000 kg, azami yük ağırlığı: 38.500 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Platform: - Telescopic loading platform with rear chamfer approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and lower section widenings - Between the 1st and 2nd axle, a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm - Recess in the bevel and extending into loading platform for excavator stick approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the platform (LC 10,000 daN) - 5 pairs of outward-folding lashing rings (LC 5,000 daN) - 2 pairs of outward-folding lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in excavator stick recess (LC 5,000 daN) - Cut-outs in outer frame of loading platform for securing straps (LC 2,000 daN) - Incl. 3-piece removable galvanized covers over wheel recesses – max. point load 3.5 t / each Two-Piece Steel Ramps: - One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm hardwood covering - Ramp with hydraulically folding ramp sections, hydraulic lifting mechanism, and hydraulically shiftable Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock activated via reverse gear and manually - Air suspension with lifting and lowering valve - Axle tools - Tyres 235/75 R 17.5 - TPMS tyre pressure monitoring system in accordance with ECE R 141 Accessories Included: - Brackets for warning panels left and right on gooseneck and rear, incl. socket - One spare wheel Godpfxoup U Hzj Actsit - 2" kingpin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on galvanized connection rail at front - 4 wheel chocks - Galvanized, extendable widenings by approx. 230 mm per side - Galvanized folding supports under rear bevel of platform - Bracket for beacon at rear of trailer - Cover plates to bridge the gap between ramps and platform - White reflective tape to EU regulations on sides and extension, red at the rear - Electro-hydraulic unit at rear, under loading platform - Control valves for ramps positioned on right side of trailer - European reflector signs (red-yellow) on rear of trailer - Four extendable warning panels by approx. 400 mm, approx. 423 x 423 mm, with a position light - Mount for beacon on warning panels - Removable ALU sideboards and tailgate on gooseneck approx. 2,440 x 400 mm - Rear galvanized removable stakes (body length approx. 2,560 mm) - 2 pairs WADER container locks in the loading platform for one 20ft or 30ft container - 3 pairs of stake pockets for plug-in stanchions 100 x 50 mm on the outer frame of the platform - One removable galvanized intermediate table with 1 pair WADER container locks - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the platform bevel - Anti-slip coated sand layer on tread plates of gooseneck and platform - 80 km/h speed limit stickers on the rear and on both sides - Load gauge for determining axle loads, including load diagram

Koşul: yeni, boş ağırlık: 10.700 kg, azami yük ağırlığı: 38.800 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 r 17,5, renk: gri-siyah, Donanım: ABS, Gooseneck: • Gooseneck with front corners chamfered at 45° and rear chamfer approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood floor Extendable loading platform: • Loading platform in extendable design with rear chamfer approx. 1,000 mm x 8° • Cut-outs in the outer frame of the loading platform for securing straps • Approx. 48 mm thick hardwood covering, checker plate covering over the axles Two-part steel ramps: • One pair of galvanized, two-part steel ramps with approx. 48 mm thick hardwood covering • Ramp sections fold in and out hydraulically, with hydraulic lifting system and hydraulic lateral adjustment • Maximum load per pair: approx. 40,000 kg Axles and tires: • BPW axles and suspension, 2 rigid axles, 1 self-steering axle • Technical axle load: 12,000 kg • Electromagnetic reversing lock, activation via reverse gear and manual operation • Air suspension with lift and lower valve • Axle tools • 235/75 R 17.5 3PMSF Braking system: • WABCO braking system according to EU regulations with EBS-E Painting: • First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component zinc-rich primer • High-quality 2-component top coat, single color in MB 7350 Novagrey • Rear section metallized and painted in RAL 9010 Landing legs: • JOST landing legs with 2-speed gearbox for 24t lift capacity (50t test load) Steel construction: • Steel construction made of high-strength fine grain steels • Steel grades: • S355J2+N/S355MC • S690QL/S700MC Electrical system: • Electrical system according to EU requirements, 24 Volt lighting • ASPÖCK UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets Included accessories: • One spare wheel with holder • One galvanized steel headboard approx. 400 mm high • Yellow-red air couplings on the galvanized connection panel at the front • 4 wheel chocks • Bracket for rotating beacon at the rear of the trailer • Holder at rear of gooseneck for ALU approach ramps • Galvanized folding supports under the rear chamfer of the loading platform • Cover plates for bridging the gap between ramps and loading platform • White reflector tape to EU specifications on the sides, extension, and red at rear • Electro-hydraulic unit mounted at the rear, under the loading platform • On both sides of the gooseneck and ramps, holders for warning panels with socket • Control valves for the ramps mounted on the right trailer side • ALU sideboards and tailboard on the gooseneck approx. 2,440 x 400 mm • Rear, galvanized removable stakes (body length approx. 2,560 mm) • Four approx. 400 mm extendable warning boards with position light • 3 pairs of WADER container locks in deck for 20ft, 30ft, or 40ft container • 6 pairs of stake pockets (100x50 mm) in the outer frame of the loading platform • Galvanized extensions, extendable by approx. 230 mm per side • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the rear chamfer of the loading platform Gisdpfehlz S Nex Actot • Anti-slip sand coating on checker plate surfaces above kingpin and loading platform • Load pressure gauge for axle load measurement including load chart • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) and hot finished.

Koşul: yeni, boş ağırlık: 10.350 kg, azami yük ağırlığı: 39.150 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Area: - Telescopic loading area with rear incline approx. 1,000 mm x 8° - 1 pair of fixed built-in wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses equipped with 15 x 15 mm square climbing strips and lower-section extensions - 1 pair of fixed wheel recesses between the 1st and 2nd axle, approx. 1,610 x 970 x 400 mm - 3-part removable galvanized covers over wheel recesses (W 670 mm) – max. point load 5 t / pc. - Recess in the ramp and extending into the load area to accommodate an excavator bucket arm approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator arm depression (LC 5,000 daN) - Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) One-piece ALU ramps: - One pair of single-piece ALU ramps approx. 2,500 x 600 mm - Ramps with spring assist and manual lateral adjustment - Maximum load per pair: 24,000 kg Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with raise/lower valve - Axle tools - Tyres 235/75 R 17.5 - TPMS (Tire Pressure Monitoring System) in compliance with ECE R 141 Accessories included: - One spare wheel with bracket in front of the bulkhead - 2" kingpin - One galvanized steel bulkhead ca. 400 mm high - Yellow-red air couplings at the galvanized front coupling strip - 4 chocks with bracket at the bulkhead - Accommodation at the rear of the gooseneck for ALU approach ramps - Galvanized extensions, extendable approx. 230 mm per side - Galvanized folding supports under the rear incline of the loading area - Bracket for a rotating beacon at the rear of the trailer Gsdeiu Er Aopfx Acteit - White reflector tape in accordance with EU requirements on sides, red on extension and rear - On the gooseneck and rear panel, bracket for warning boards including socket, left and right - On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm - Removable rear galvanized stanchions (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the load area for a 20ft or 30ft container - 3 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading area - One removable galvanized intermediate table with 1 pair WADER container pockets - 20 x 20 mm square climbing strips every 200 mm along the outer frame of the loading area's rear incline - Non-slip sand coating painted onto the checker plate on the gooseneck and loading area - Four warning boards extendable by approx. 400 mm each, approx. 423 x 423 mm with position light - Bracket for rotating beacon on warning boards - 80 km/h speed stickers on the rear and both sides - Load gauge for axle load determination including load chart - HRM Metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces metallically finished with ZINACOR 850 (Zinc 85% - Alu 15%) hot metalized

Koşul: ikinci el, azami yük ağırlığı: 75.700 kg, toplam ağırlık: 93.200 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 06/2008, yükleme alanı uzunluğu: 8.700 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 885 mm, lastik boyutu: 245/70 R17.5, renk: beż, Üretim yılı: 2008, Gooseneck, fixed, in central beam design: - Loading area 3,700 mm x 2,480 mm - Beveled 10°, front corners 45° (1,080 mm long, 190 mm high bevel at gooseneck end) - Closed outer frame - Max. kingpin load 26,000 kg - Articulation radius 2,700 mm - 2" kingpin - Wooden floor - Hydraulically operated landing legs - One-piece aluminum drop sides, 400 mm high, three sides closed including tailgate, folding and removable stanchions - 2 pairs of lashing points LC 8,000 daN Loading area: - Single-stage extendable, continuous over running gear - Designed as an outer/inner tube structure with a 1,090 mm long fixed deck section at the front - (L x W) 8,700 mm x 2,550 mm, extendable by 6,700 mm to a max. of 15,400 mm - Steel plate flooring - Locking of extension stages via spring-loaded cylinder and cone bolt - Vehicle optimized for maximum extension - 7 pairs of lashing points LC 13,000 daN - 6 pairs of lashing points LC 6,000 daN - 6 pairs of stanchion pockets 100 x 50 mm (LC 2,000 daN) 6-axle chassis: - 1 rigid axle, 5 forced steered axles - Axle make: SAF - Chassis width 2,550 mm - 1st axle is a load-dependent lift axle - 2nd axle can be lifted manually (not load-dependent) - Axle spacing, starting from first axle 1,310 mm - Twin tires 245/70 R 17.5 - Air suspension, stroke 200 mm - Ride height: 885 mm +100 mm / -100 mm - 2nd ride height: 845 mm +140 mm / -60 mm - Steel/wood floor covering Rear of vehicle: - "Beveled" design (600 mm long, 10° bevel) - 1,000 mm rear overhang from center of last axle - Removable ramp eye at end cross member - Mechanical support for stability during loading - 1 pair of lashing points LC 6,000 daN - 1 pair of lashing points LC 13,000 daN Loading ramps: - Two-part ramps, length 2,850 mm + 1,540 mm, width 720 mm - Ramp lifting gear hydraulic Gjdexp U Tzspfx Acteit - SuperGrip rubber surface - Climbing strips on ramp edges 20 mm x 20 mm x 100 mm - Laterally adjustable by hydraulic cylinder to max. external width of 2,790 mm or minimum internal distance of 480 mm - Integrated mechanical lock in ramp lifting cylinder for securing ramps in transport position - Mount for revolving warning beacon Hydraulics: - Hydraulic connection for tractor unit (1 set), connections for the tractor, hydraulic pump in tractor unit with max. delivery capacity 60 l/min - Manual emergency hydraulic pump - Electro-hydraulic unit Steering assist: - Steering cylinder for manual control of trailer axles via cable remote control, spiral cable extendable from 1.5 m to 5 m Accessories included: - Spare wheel holder on front of gooseneck, plug-in, galvanized - Mounting bracket for stanchions on gooseneck - 2 pairs of warning plates, approx. 423 mm x 423 mm - Widening incl. widening planks, attachable widening element at vehicle rear - 1 pair of wheel chocks incl. holder - 1 spare wheel - Central lubrication system with 2 pumps - Paint finish single color RAL-1001 beige

Koşul: yeni, boş ağırlık: 14.350 kg, azami yük ağırlığı: 53.450 kg, toplam ağırlık: 67.800 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, hidrolik arka platform, Gooseneck: - Gooseneck in SNT design to optimize the loading deck length, length approx. 3,700 mm - Gooseneck rear with chamfer approx. 1,000 mm x 10° - Suitable for tractor units: 6x2, 6x4, 8x4 short Loading Platform: - Loading platform with extendable design, length approx. 8,800 mm, with rear chamfer approx. 500 mm x 10° - Recess in the loading platform as well as extending into the chamfer for accommodating the excavator dipper stick, approx. 3,850 x 750 x 210/290 mm Two-Part Steel Ramps: - One pair of two-part steel ramps, each approx. 4,350 mm long and approx. 900 mm wide - Ramps with rubber covering - Ramps can be hydraulically adjusted individually approx. 235 mm outward and approx. 215 mm inward - "Super Grip" rubber flooring 25 mm and steel plate flooring approx. 5 mm as additional reinforcement on the chamfer of the platform - Square climbing strips 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles, suspension, and tires: - BPW axles and suspension, 1st axle steered, all other axles forced steered hydromechanically - Technical axle load: 12,000 kg - 1st axle with electromagnetic reversing lock, can be activated via reverse gear and manually - Air suspension with lifting and lowering valve - Tires 235/75 R 17.5 - TPMS tire pressure monitoring system compliant with ECE R141 - TPMS tire pressure sensors fitted on all wheels including spare wheels Surface Treatment: - Complete steel construction automatically shot-blasted with blasting machine after welding - Second blasting process with corundum for optimal adhesion of the coating system - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure best possible corrosion protection - Final coating with 2 layers of single-color 2-component topcoat in MB 7350 Novagrau Included Accessories: - Steel front wall, plug-in, approx. 400 mm high - 3kW electric-hydraulic power unit for hydraulic controls, except for hydraulic winches - 1 spare wheel - External beam on gooseneck with mounting holes for screwable lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings at the rear area of the gooseneck - On the gooseneck, 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized - On the gooseneck, 1 plug-in ALU rear board, approx. 400 mm high, anodized - Approx. 40 mm thick hardwood floor on the gooseneck, checker plate at the king pin area - 2" king pin - Round NATO socket at the front connector strip - 4 wheel chocks - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross beam - 8 pairs of recessed lashing rings in the outer frame of the loading platform, foldable outward - Extensions (galvanized) extendable by approx. 230 mm per side - Wheel recesses with square climbing strips, 15 x 15 mm, continuously open in front of the axles up to the cross beam of the gooseneck, approx. 700 x 410 mm - Wheel recesses with square climbing strips, 15 x 15 mm, between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm Gedpfx Aeya E A Njctoit - ALU covers for the wheel recesses, also usable as bridging elements for the extension or as extension beams - 1 pair of mechanical rear supports - Remote control (radio and cable) - Lifting axle at the front axle - Square climbing strips 20 x 30 mm, approx. every 200 mm - Central lubrication system with 1 pump - Wabco Smart Board system - 4 warning boards, approx. 423 x 423 mm

Koşul: yeni, azami yük ağırlığı: 38.800 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5 3PMSF, renk: gri, Donanım: ABS, Gooseneck: Giedsuqlmnepfx Actot - Gooseneck with front corners chamfered at 45° and rear bevel approximately 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable Loading Platform: - Extendable loading platform with rear bevel approximately 1,000 mm x 8° - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, over-axle areas with checker plate Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 self-tracking axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear or manually - Air suspension with raise/lower valve - Axle tools - 235/75 R 17.5 3PMSF Brake System: - WABCO braking system complying with EU regulations, with EBS-E (2S2M) Landing Legs: - JOST mechanical landing legs with 2-speed gearbox, 24 t lifting capacity (50 t test load) Accessories Included: - One spare wheel with holder in front of the front wall - 2" kingpin - Galvanised steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanised front connection strip - 4 wheel chocks with holders on the front wall - Bracket for beacon at rear of trailer - Recess at rear of gooseneck for ALU entry ramps - Galvanised folding supports under the loading platform's rear bevel - Cover plates to bridge gap between ramps and loading platform - White reflective tape according to EU regulations on sides, extendable section, and rear in red - Electro-hydraulic unit at the rear, under the loading platform - Brackets for warning signs on both left/right of gooseneck and ramps, with socket - Ramp control valves fitted on right-hand side of trailer - Mudflap at the trailer rear - Manual and documentation on USB stick - ALU side boards and rear wall on gooseneck approx. 2,440 x 400 mm - Rear galvanised plug-in stanchions, removable (superstructure length approx. 2,560 mm) - Four approx. 400 mm extendable warning signs, approx. 423 x 423 mm, each with a position light - 3 pairs of WADER container locks in the loading platform for 20ft, 30ft or 40ft container - 6 pairs of stake pockets 100x50 mm in outer frame of loading platform - Galvanised extendable width extensions, approx. 230 mm per side - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading platform bevel - Sanded, painted anti-slip layer on checker plates over kingpin and loading platform - Holder for beacon on warning signs - European reflector boards (red-yellow) at the rear - 80 km/h speed limit stickers on rear and both sides - Load manometer for determining axle loads including load chart - HRM Metallisation (High Resistance Metallisation) of outer frame - Complete steel structure shot-blasted, then defined visible surfaces metallised with ZINACOR 850 (Zinc 85% - Aluminium 15%) hot-finished

Koşul: ikinci el, toplam ağırlık: 61.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2010, Donanım: ABS, Semi-trailer - Vehicle Identification No.: W09PG3009A0M49815 - First registration: 25.08.2010 DOLLY - Vehicle Identification No.: W09PG3009A0M49816 - First registration: 25.08.2010 ELECTRO-HYDRAULICS German inspection (HU) valid until 04/2026 - Safety inspection (SP) due Empty weight: Trailer: 16,850 kg -- Dolly: 2,240 kg Fifth wheel height: 1,280 mm - Interchangeable kingpin - 3.5" Turntable clearance at front approx. 1,640 mm --Hydraulically lowerable and height-adjustable gooseneck - length 3,750 mm Low bed: Length: 6,850 mm Width: 2,750 mm - Loading height: approx. 350 mm TELESCOPIC EXTENSION up to 4,000 mm CAN BE WIDENED up to 3,210 mm Chassis frame: Length: 4,100 mm Width: 2,750 mm - Loading height: approx. 1,035 mm Overall length: 14,700 mm Excavator trough - bucket recess Central lubrication system GIGANT axles - PENDULUM AXLES with drum brakes Gjdswxi Nropfx Actoit with radio remote control 3 x hydraulically suspended and forced-steered axles Axle load 3 x 12,000 kg Maximum fifth wheel load 25,000 kg Tyres: 245/70 R 17.5 Matching 1-axle DOLLY BPW Eco axle with drum brake Air suspension Modifications, prior sale, and errors excepted. The description serves for general identification of the vehicle and does not constitute a guarantee in terms of purchase law. The purchase contract description is binding. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we will be happy to provide an offer through our partner workshops! Vehicle may have advertising stickers and/or labeling. Our general terms of delivery and payment apply.

Koşul: yeni, boş ağırlık: 13.500 kg, azami yük ağırlığı: 51.500 kg, toplam ağırlık: 69.500 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 r17.5, renk: gri, Donanım: ABS, Gooseneck: Gooseneck in SNT design for optimization of loading area length, length approx. 3,700 mm Gooseneck rear with bevel approx. 1,000 mm x 10° Loading Area: Telescopic loading area, length approx. 8,800 mm, with rear incline approx. 500 mm x 10° Recess in the incline and extending into the loading area for accommodating the excavator dipper stick Pneumatic locking with conical pin and reinforced locking positions The supply lines are protected within the extendable beam and adjust to the respective loading area length Ramps: 1 pair of two-piece steel ramps, approx. 4,350 mm x 900 mm Hydraulically folding ramp tips Ramps can be hydraulically adjusted individually approx. 235 mm outwards and 215 mm inwards Axles and Suspension: BPW axles and suspension, two fixed axles, two steering trailing axles Electromagnetic reverse lock activated via reverse gear and manually Air suspension with lifting and lowering valve Axle tool Tyres: 235/75 R17.5 3PMSF twin tyres Load index: 143/141J (144/144F) Godpfek Ahugox Acteit Brake System: WABCO brake system, EBS-E according to EU regulations Lighting System: 24-volt lighting system, “ASPÖCK-NORDIK full LED” Metallization: Standard HRM metallization of the external frame Complete steel structure shot blasted, subsequently visible defined surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) hot-finished Steel Structure: Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welders certified according to DIN-EN 287-1 MAG welding process according to EN ISO 4063 Shielding gas M21 according to EN ISO 14175 Included accessories: Removable steel front wall, height approx. 400 mm ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets 24N connection according to ISO-1185 24S connection according to ISO-3731 15-pin connection according to ISO-12098 Round NATO socket on the front connection strip Cable for supplying the electro-hydraulic pump and/or electric winch (35 mm², 3.5 m long) between trailer and tractor unit with plug (NATO-NATO) 3 kW electro-hydraulic unit for controlling hydraulic operations (except for hydraulic winches) 1 spare wheel with mounting adapter External beams on the gooseneck with mounting holes for bolt-on lashing rings, first hole approx. 200 mm from the front, then approx. every 400 mm 2 pairs of screw-in lashing rings included Mounting hole on the upper rear of the gooseneck external beam for a screw-on lashing ring 1 pair screw-in lashing rings Approx. 40 mm thick hardwood floor above gooseneck On the gooseneck, 1 pair of plug-in side aluminium drop sides, approx. 400 mm high, anodized On the gooseneck, one plug-in aluminium rear wall, approx. 400 mm high, anodized 2" king pin Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide 4 wheel chocks with holders Provision for aluminium approach ramps Mechanical landing gears with 2-speed gearbox and crank On the loading area, continuous hardwood floor approx. 50 mm thick, interrupted only between the axles Load area locking with conically welded positioning profiles every 250 mm including pre-tension plate Slotted holes at the front of the loading area for attachable and repositionable bridging plates 1 intermediate table with recessed loading area, approx. 300 mm wide, for the large cross-section sliding tube with sheet metal covering Front and rear with longe...

Koşul: yeni, boş ağırlık: 9.500 kg, azami yük ağırlığı: 35.500 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.540 mm, süspansiyon: hava, lastik boyutu: 435/50 R 19.5, renk: gri, işletme ağırlığı: 9.500 kg, Donanım: ABS, Loading platform in extendable design: Loading platform with hardwood floorboards, rear chamfer approx. 1,000 mm x 8° 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm 2 pairs of lashing rings (LC 5,000 daN) 1 pair of lashing rings (LC 10,000 daN) 6 pairs of folding external lashing rings (LC 5,000 daN) 2 pairs of folding external lashing rings (LC 10,000 daN) Cut-outs in the outer frame of the loading platform for hooking in tensioning straps (LC 2,000 daN) Braking system: Braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: Premium, durable corrosion protection for the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer High-quality single-color 2-component (2K) top coat in Novagrau Rear section metallised and painted in RAL 9010 (pure white) No metallic effect paint possible Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: Steel construction made of high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: Electrical system in accordance with EU regulations, 24 volt lighting Sockets: 24N, 24S & 15-pin Axles and tires: Giodpfx Aek Eammjctst BPW axles, air suspension, disc brakes (377 mm), with lift/lower function The trailing steering axles can be locked for reversing by electro-magnetic control via reverse gear or manually Axle tools Tires 435/50 R 19.5 Accessories included: At the front galvanized connection rail, yellow-red air couplings 4 wheel chocks with holders 2" king pin Galvanized steel front wall, approx. 1600 mm high, EN12642-XL White reflective tape to EU standards on the sides, on the extension, and red at the rear Loading area with heavy-duty hardwood flooring 9 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading platform 1 spare wheel holder under the loading platform, right side of direction of travel Galvanized drop-down supports under the loading platform chamfer Sliding hook-in strips for ALU loading ramps at the rear of the vehicle European reflective signs (red-yellow) at the rear of the trailer A mudflap at the rear of the trailer A bracket for a rotating beacon at the rear of the trailer On the gooseneck and rear panel, left and right, each with a bracket for warning signs including socket 1 HDPE toolbox 620x360x610 under the loading platform, left side of direction of travel 4 pairs of WADER container locks in the loading platform for 1x 20ft container or 1x 40ft container; the extension is prepared with an additional locking position for a 45ft container 3 pairs of crosswise stake pocket strips mounted in the loading platform for 100 x 50 mm plug-in stakes Lift axle on the front axle with control via TEBS E depending on current axle load and load status Speed stickers 80 km/h at the rear and on both sides Four warning panels, extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light. Each warning panel with a bracket for revolving beacon Load gauge for determining axle loads including load chart HRM metallization (High Resistance Metallisation) of the outer frame Complete steel construction shot-blasted, then the defined visible surfaces are metallised

Koşul: ikinci el, azami yük ağırlığı: 34.440 kg, toplam ağırlık: 46.500 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/1999, yükleme alanı uzunluğu: 13.550 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 950 mm, toplam genişlik: 2.550 mm, Toplam ağırlık: 46.500kg Boş ağırlık: 12.060kg Yük kapasitesi: 34.440kg Toplam uzunluk: 13.550mm - 26.550mm Genişlik: 2.550mm Diğer Bilgiler - 3 aks hidrolik zorunlu yönlendirmeli - Üstsadel yönlendirme kıskacı - Rampa askı rayı - Yükleme alanı için takma çıtalar - 2 kat teleskopik, 26.550 mm’ye kadar uzatılabilir - Kuğu boynu üzerinde alet kutusu Gedpfx Ajycpbnjcteit - E-Tekerlek - Elektrik ön hazırlığı - Hidrolik art yönlendirme fonksiyonu, elektronik uzaktan kumanda - Geniş bağlama paketi - Kendi hidrolik pompa ünitesi Diğer yeni ve ikinci el havuzlu yarı römorklar mevcuttur. Daha fazla bilgi için

Koşul: ikinci el, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2008, ENGLISH Visit our website, where you will find our complete stock with many more photographs and information in several languages. Giedpfjxpl Ntex Actet SEL 8001 Meusburger MTS-3 Telescopic / 13,085 - 17,385 mm / Steering axle German registration 1st registration: 18.11.2008 Technical total gross weight (kg): 49,000 Permitted total weight (kg): 47,000 Unladen weight (kg): 7,670 VIN: W09TS300980M49145 TIRES AND AXLES: Tires: 245/70 R 17.5 Axle configuration: 3 axles BPW 3rd axle: Friction-steered trailing axle (passive steering axle) Air suspension Drum brakes OTHER SPECIFICATIONS: Telescopic trailer VEHICLE DOCUMENTS: Registration certificate part I Registration certificate part II M. BUFANO m. (Italiano, English, Deutsch) J. CORDEIRO j. (Português, Español, Italiano, English) J. MARJANOVIC j. (Deutsch, Bosanski) L. OBODYNSKA Ukrainian/Українська, Russian/Русский We speak: GERMAN, ENGLISH, ITALIAN, SPANISH, PORTUGUESE, UKRAINIAN, RUSSIAN, POLSKI, BOSNIAN Although every effort has been made to guarantee the accuracy of the information, we cannot accept any liability for errors or omissions. We kindly ask our customers to consult the available photos. The dimensions provided are approximate values. All vehicles are sold in their current condition. Prospective buyers are encouraged to visit our premises to personally assess the vehicle. A test drive can also be arranged. Please note that the vehicle's batteries supplied are those currently installed. Should new batteries be required, we are pleased to provide price information.

Koşul: ikinci el, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2011, Donanım: ABS, Vehicle Identification Number: W09TS300990M49248 Telescopic extension: 4,300 mm Sliding bed Wheel recesses Unladen weight: 9,000 kg German MOT (HU) due Gooseneck: 3,650 mm - Fifth wheel height: 1,250 mm Low bed: Length: 9,430 mm (of which 1,830 mm tapered) -- Width: 2,540 mm -- Loading height: 890 mm Removable rails Support legs Gisdpfx Acjyx N Eyjtet Width extension lighting Front fifth wheel load: max. 19,000 kg Axle loads (technical): 3 x 10,000 kg BPW Eco Plus axles with drum brakes Axle 1 = liftable 2 x toolboxes Tyres: 235/75 R 17.5 Spare wheel carrier WITH spare wheel Modifications, prior sale, and errors expressly reserved. The description is for general identification purposes only and does not constitute a warranty in the legal sense of the term. The purchase contract description is decisive. Our offer is generally without new TÜV inspection. If a new TÜV inspection is required, we are glad to provide a quote from our partner workshops! The vehicle may have advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply.