Kullanılmış Faymonville Diğer satın al (220)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Uygunluk
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Makine üreticisi
- Üretici Z'den A'ya
- Makine üreticisi
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Uygunluk
- Uygunluk
FAYMONVILLE
Küçük ilan
Landsberg am Lech
2.201 km
Alçak şasi dorse
FAYMONVILLESTZ-6WAA 2 fach Tele 32.9 m
Ara
Durumu: kullanılmış, azami yük ağırlığı: 62.400 kg, toplam ağırlık: 85.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 11/1997, with hydraulic suspension, hydromechanical forced steering, double telescopic loading platform, with rear chamfer
Neck (Gooseneck) hydraulically adjustable
- Designed loading platform 3,700 x 2,480 mm
- Hydromechanical forced steering (dual-circuit steering)
- Slewing ring-mounted fifth wheel plate with replaceable 3.5" kingpin and adjustable steering wedge
- Maximum steering radius (internal) 2,700 mm
- Fifth wheel load 25,000 kg
Dodpfx Aowy A T Hsg Tekg
Loading platform
- Double telescopic, constructed as outer and inner tube design with 1,000 mm fixed loading platform section at the front
- 500 mm long intermediate deck
Chassis
- ABS
- Hydraulically suspended 6-axle chassis
- SAF axle units, consisting of 5 forced-steerable steering axles and 1 fixed axle
- Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS)
Vehicle rear
- Design "chamfered", 500 mm
- Mechanical rear support
Special equipment
- Electro-hydraulic power pack
- Radio remote control
- Lift option (load-dependent) for axles 1 and 2
Ramps, 2-section hydraulic
2,900 mm + 1,700 mm, 850 mm wide
Dimension L: 16,400 mm - 32,900 mm
Unladen weight: 22,600 kg
Technical Data
Neck (Gooseneck)
Loading area (LxW): 3,700 x 2,480 mm
Loaded fifth wheel height: 1,300 mm
Steering radius: 2,700 mm
Fifth wheel load: 25,000 kg
Loading platform
Loading area (LxW): 13,000 mm x 2,750 mm
Double telescopic, 8,000 mm + 8,500 mm, for a total of 29,500 mm deck length
Travel height: 900 mm (+/-130 mm)
Steering
1st axle, self-steering
2nd – 6th axle, hydromechanical forced steering (dual-circuit steering)
Küçük ilan
Landsberg
2.202 km
Alçak şasi dorse
FAYMONVILLEMAX100-N-3B-9.30-(CS)-U
Ara
Durumu: yeni, azami yük ağırlığı: 36.461 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.480 mm, toplam yükseklik: 860 mm, Üretim yılı: 2025, Technical Description
Gooseneck:
Gooseneck with rear taper approx. 750 mm x 10°.
3 pairs of lashing rings (LC 5,000 daN).
30 mm thick hardwood flooring.
Loading Area:
Dksdpfx Agow Dl Hwj Tog
Hydraulically liftable and lowerable platform after the gooseneck, approx. 2,800 mm in length, with rear taper approx. 1,000 mm x 8°.
6 pairs of fold-out lashing rings to the outside (LC 5,000 daN).
2 pairs of fold-out lashing rings to the outside (LC 10,000 daN).
1 pair of foldable lashing rings to the inside on the front central beam (LC 10,000 daN).
Grating floor covering C40/4 (point load 2.3 t on an area of 20 x 20 cm), over the axles tread plate covering.
Two-Piece Steel Ramps:
One pair of galvanized two-part steel ramps approx. 3,185 + 1,420 x 1,250 mm with grating covering C40/5 (point load 8 t on an area of 20 x 20 cm).
Ramps with hydraulically folding ramp sections and hydraulic lifting mechanism.
Maximum load per pair: 40,000 kg
In accordance with Regulation 1230/2012/EU, ramps with a length of less than 300 mm in driving position are not included in the overall vehicle length of 16,500 mm.
Landing Legs:
JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load).
Tyres:
235/75 R17.5 3PMSF tyres at the manufacturer’s discretion.
TPMS:
TPMS tyre pressure monitoring system according to ECE R 141.
Data transmission to the towing vehicle via the standardized EBS interface according to ISO 11992. For proper display, the towing vehicle must be capable of transmitting and displaying this data.
Axles:
BPW axles and suspension, 2 rigid axles, 1 trailing steering axle.
Technical axle load: 12,000 kg
Electromagnetic reverse lock, activated by reverse gear and manually.
Air suspension with lift and lower valve.
Axle tools.
Brake System:
WABCO brake system in accordance with EU regulations with EBS-E (2S2M) without connection lines to the tractor unit.
Electrical System:
Electrical system complying with EU regulations, 24-volt LED lighting ASPÖCK-NORDIK (ASS3).
All LED side marker lights flash with the indicators.
ASPÖCK-UNIBOX at the front connection strip with sockets 24N, 24S & 15-pin.
Connections in accordance with ISO:
24N ISO-1185
24S ISO-3731
15-pin ISO-12098
Steel Structure:
Manufactured from high-strength fine-grained steels.
Steel grades:
– S355J2+N / S355MC (yield strength 355 MPa)
– S690QL / S700MC (yield strength 690 MPa)
Curtain Body:
Curtain body ??? 3,960 mm ???
– Galvanized front wall with tensioning system for sliding curtains.
– "EDSCHA" brand roof, forward-sliding on ALU roof bow profiles (bolted to front and rear wall).
– 3 pairs of sliding stakes in the loading area.
– Rear of the body hydraulically extendable to left and right by approx. 750 mm.
– Sliding roof with upwards foldable portal beam.
– Sliding curtain with 700 mm length reserve, lashing straps approx. every 600 mm.
– Height to upper edge of body approx. 3,960 mm (loaded).
– Driving with open sliding roof is prohibited and will damage the curtain.
Paintwork:
Entire steel structure is automatically blast-cleaned with a wheel blasting machine after welding. Second blast treatment with corundum for optimal coating adhesion.
HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure maximum corrosion protection.
Final painting with 2 coats of 2K topcoat, single colour, shade of choice according to RAL system 841GL.
Rear section metallized and painted in RAL 9010 (pure white). No metallic paint.
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 3-A-Semi-hydr.Ladebo.-Rampen
Ara
Durumu: kullanılmış, boş ağırlık: 10.300 kg, azami yük ağırlığı: 39.200 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2025, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5 3PMSF, renk: gri, Üretim yılı: 2025, işletme ağırlığı: 10.300 kg, Donanım: ABS, For every used semi-trailer, you receive a current and complete inspection and functional report.
Gooseneck:
- Gooseneck with rear bevel approximately 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm hardwood floor
Loading platform:
- Hydraulically height-adjustable loading platform after the gooseneck, approx. 2,800 mm in length, with rear bevel approx. 1,000 mm x 8°
- 6 pairs of fold-out external lashing rings (LC 5,000 daN)
- 2 pairs of fold-out external lashing rings (LC 10,000 daN)
- 1 pair of fold-in internal lashing rings at the front center beam (LC 10,000 daN)
- Cut-outs in the outer frame of the platform for hooking in lashing straps (LC 2,000 daN)
- Approx. 48 mm hardwood floor, chequer plate covering over the axles
Two-piece steel ramps:
- One pair of galvanized two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with 48 mm thick hardwood covering
- Ramps with hydraulically folding ramp segments, hydraulic lifting equipment, and hydraulically adjustable width
- Maximum load capacity per pair: 40,000 kg
Axles, suspension, and tires:
- BPW axles and suspension, 2 fixed axles, 1 self-steering axle
- Technical axle load: 12,000 kg
- Electromagnetic reverse lock, activated via reverse gear and manually
- Air suspension with lift and lower valve
- Axle tools
- Tires 235/75 R 17.5 3PMSF
Dkedpfxsxnarmj Ag Tog
- TPMS tire pressure monitoring system according to ECE R 141
Included accessories:
- One spare wheel with holder
- 2" king pin
- One galvanized steel front wall approx. 400 mm high
- Yellow-red air couplings on the galvanized front connection strip
- 4 wheel chocks with holders
- Galvanized folding supports under the loading platform bevel
- One holder for a beacon at the rear of the trailer
- Cover plates for bridging the gap between the ramps and the loading platform
- Electro-hydraulic unit at the rear, beneath the loading platform
- On the gooseneck and ramps, left and right, holder for warning signs with sockets
- Removable ALU side and rear boards on gooseneck approx. 2,440 x 400 mm
- Rear galvanized drop-in posts removable (superstructure length approx. 2,560 mm)
- One electric winch with radio remote control, approx. 5,400 kg lifting capacity, including 9.5 mm steel cable, 24 m long with cable guide roller
- Bolted 5-ton ring for redirecting the winch cable on the gooseneck without a deflection pulley
- 2 pairs of WADER container locks recessed into the platform for one 20 ft container
- 6 pairs of stake pockets for drop-in stakes approx. 100 x 50 mm in the outer frame of the platform
- Lift axle at the front axle controlled by TEBS E depending on current axle load and current loading condition
- 7 pairs of recessed lashing rings along the center beam (LC 5,000 daN)
- 2 pairs in the lift bed
- 5 pairs in the rear platform area
- 1 pair of recessed lashing rings at the rear bevel along the center beam (LC 10,000 daN)
- Painted sand layer for anti-slip on chequer plate on gooseneck and loading platform
- BEKAMAX (Pico) centralized lubrication system with standard grease NLGI-2
- Four warning signs extendable by approx. 400 mm (approx. 423 x 423 mm)
- Load pressure gauge for determining axle loads including load diagram
- HRM metallization (High Resistance Metallisation) of the outer frame
- Complete steel structure shot-blasted, then the specified visible surfaces metallized with ZINACOR 850 (Zinc 85% - Aluminum 15%) hot-finished
Küçük ilan
Essen
2.594 km
Çalışma platformlu yarı römork
FAYMONVILLEMAX Trailer MAX210 Telesattel
Ara
Durumu: yeni, azami yük ağırlığı: 38.400 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, Our complete inventory of vehicles, including those available immediately or at short notice, can be found on our website.
Excerpt from the equipment list. Complete equipment details available upon request.
Loading Platform:
* Extendable loading platform with pneumatically operated locking mechanism
* Loading platform fitted with approx. 30 mm thick hardwood floorboards
* 7 pairs of fold-out lashing rings (LC 5,000 daN)
* 3 pairs of fold-out lashing rings (LC 10,000 daN)
* Cut-outs in the outer frame of the loading platform for inserting tie-down straps (LC 2,000 daN)
Landing Legs:
* JOST landing legs (mechanical) with 2-speed gearbox, lifting capacity 24t (test load 50t)
Tyres:
* Tyre size 385/65 R 22.5
Axle:
* BPW axles and suspension, all axles forced-steer by hydro-mechanical means
* With disc brakes
* Technical axle load: 10,000 kg (ET 0)
* Air suspension with lifting and lowering valve
Braking System:
* WABCO brake system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit
Dodpfx Aoxl Nf Dsg Tekg
Finish:
* High-quality single-tone, two-component (2K) top coat in RAL 3002 Carmine Red
Accessories:
* Remote steering from the front and rear, operable via cable remote control with push-buttons, with single-track axle control (installation in the tractor unit not included)
* Electro-hydraulic power unit
* 4 wheel chocks with brackets mounted on the front bulkhead
* 2-inch kingpin
* Front galvanized connection plate with yellow and red air couplings
* Mounting bracket for a rotating beacon at the rear of the trailer
* 10 pairs of stake pockets for drop-in stanchions approx. 100 x 50 mm in the outer frame of the loading platform
* 1 spare wheel carrier under the loading platform, right-hand side in the direction of travel (no spare wheel included)
* Load gauge for determining axle loads including load chart
Incl. Special Equipment:
* Galvanized steel front wall (EN12642-XL), approx. 1,600 mm high
* 6 pairs of WADER container pockets on the loading platform, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container; an additional locking point is provided in the extension for a 45' container
* 4 pairs of transverse stake pocket rails mounted on the loading platform for drop-in stanchions approx. 100 x 50 mm
* Storage rack for up to 9 pairs of drop-in stanchions mounted internally on the front wall
* Step ladder mounted left and right in direction of travel
* One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted at the front left under the loading platform in direction of travel
* Additional INOX toolbox, approx. 1,200 x 460 x 550 mm, under the loading platform in direction of travel, left-hand side
* Loading platform with approx. 30 mm thick wooden floor inset into Omega profiles
* Lift axle on the front axle with control via TEBS E
* Centralized lubrication system BEKAMAX (Pico) with standard grease NLGI-2
* 2 LED reversing lights mounted on the rear panel
* 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear
* HRM metallization (High Resistance Metallisation)
Küçük ilan
Bakum
2.574 km
Alçak şasi dorse
FAYMONVILLEPlattform, ausziehbar, Lenkachse, Tieflader, 15250mm lang
Ara
Durumu: kullanılmış, boş ağırlık: 14.100 kg, azami yük ağırlığı: 33.900 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 11/1999, süspansiyon: hava, lastik boyutu: 235/75 17,5, lastik durumu: 50 yüzde, renk: yeşil, Üretim yılı: 1999, ön lastik ölçüsü: 235/75 17,5, arka lastik boyutu: 235/75 17,5, şoför kabini: gündüz kabini, emisyon sınıfı: hiçbiri, Donanım: kamyon kaydı, Reference number for inquiries: 68574
Faymonville, Platform Trailer
* Year of manufacture: 1999
* Air suspension
* Steering axle
* Forced steering axle
Dksdpfx Ajv Rvgcjg Tjg
* Air connection coupling head (red & yellow)
* Connecting plug: 2x7-pin
* Lift/lower mechanism
* Telescopic - extendable semi-trailer
* Suspension: Air
* Gross vehicle weight: 48,000 kg
* Unladen weight: 14,100 kg
* Payload: 33,900 kg
* Permissible total weight: 48,000 kg
* Axle manufacturer: SAF
* Tire condition 1st axle: 50% -- 50% - Tire size: 235/75 R17.5
* Tire condition 2nd axle: 50% -- 50% - Tire size: 235/75 R17.5
* Tire condition 3rd axle: 50% -- 50% - Tire size: 235/75 R17.5
* Tire size: 235/75 R17.5
* BODY BUILDER: ES-GE
* Extension defective
* Steering axles not functional
* Moveable
Disclaimer:
Subject to modifications, prior sale, and errors.
More photos and videos available on our website.
Our comprehensive service includes:
* Purchase / sale / rental of commercial vehicles
* Fast and simple financing solutions
* Application for all (export) documentation
* Arrangement of export / customs license plates
* Vehicle preparation: new tarpaulins, lettering, coatings, etc.
* Professional loading and load securing
* TÜV inspections, registration service
* Transfer/shipping of commercial vehicles
Consult our trained professional staff – we are happy to advise you.
Küçük ilan
Bad Salzuflen
2.510 km
Alçak şasi dorse
FaymonvilleSTBZ - 2VAA Megamax Yachttransport
Ara
Durumu: kullanılmış, boş ağırlık: 14.760 kg, azami yük ağırlığı: 21.240 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 10/2007, toplam uzunluk: 23.700 mm, süspansiyon: diğer, renk: kırmızı, yakıt türü: benzin, vites türü: diğer, şoför kabini: diğer, emisyon sınıfı: hiçbiri, - Faymonville STBZ-2VA.
- 2x uzatılabilir, toplam uzunluk 23,70 m
Dsdpfx Agew H S Edo Tekg
- Üretim yılı: 2007
- Boş ağırlık: 14.760 kg
- Azami yük kapasitesi: yaklaşık 21.240 kg
- Azami toplam ağırlık: 36.000 kg
- Teknik olarak izin verilen azami toplam ağırlık: 38.000 kg
- Lastik: Lastik ebadı: 235/75 R17.5 Yük endeksi: 141J
- Treyler kullanımda; konum ve inceleme isteğe bağlı
- Hata ve ön satış hakkı saklıdır! ... KDV gösterilebilir
Küçük ilan
Bremen
2.553 km
Alçak yükleyici yarı römork
FAYMONVILLEMax Trailer F-S44-1A1Y
Ara
Durumu: kullanılmış, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 10.700 kg, ilk tescil: 06/2015, Üretim yılı: 2015, FAYMONVILLE Max Trailer F-S44-1A1Y
Uzunluk: 13.050 mm
Genişlik: 2.550 mm
Dkedpfxjvx R Nhs Ag Teg
Ön lastik ölçüsü: 235/75R17,5
Arka lastik ölçüsü: 235/75R17,5
Dingil mesafesi: 1.360 mm
Azami toplam ağırlık: 40.000 kg
Taşıma kapasitesi: 29.300 kg
Boş ağırlık: 10.700 kg
Donanım:
Vinç
2" king pin
5 pinli NATO fişiyle çalışma
4 SAF dingil, 2'si yönlendirilebilir
ABS
Arka destek
ESB
hidrolik yükleme rampaları (çelik rampalar)
teleskopik
Kampanalı frenler
Küçük ilan
Landsberg
2.202 km
Alçak şasi dorse
FAYMONVILLEMAX100-N-4X-9.30-(CS)
Ara
Durumu: yeni, azami yük ağırlığı: 40.017 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2025, Technical Description
Gooseneck:
Gooseneck with rear chamfer approx. 750 mm x 10°.
3 pairs of lashing rings (LC 5,000 daN).
Hardwood flooring, 30 mm thick.
Loading Area:
5 pairs of fold-out lashing rings (LC 5,000 daN).
3 pairs of fold-out lashing rings (LC 10,000 daN).
1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN).
Hardwood flooring approx. 48 mm thick, tread-plate covering over the axles.
Landing Legs:
JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load).
Tyres:
Tyres 205/65 R17.5, manufacturer’s choice.
TPMS:
TPMS tyre pressure monitoring system in accordance with ECE R 141.
Data transmission to the tractor unit is via the standardised EBS interface as per ISO 11992. For correct display, the tractor unit must be capable of transmitting and displaying this data.
Axles:
BPW axles: two fixed axles, two self-steering axles, air suspension, drum brakes, lifting/lowering function.
The self-steering axles have electro-magnetic reverse lock, activated via reverse gear or manually.
Axle tool included.
Brake System:
WABCO brake system compliant with EU regulations with EBS-E (4S3M), no connecting lines to the tractor unit.
Electrical System:
Electrical system as per EU regulations, 24 Volt LED lighting ASPÖCK-NORDIK (ASS3).
All LED side marker lights synchronise with the indicator.
ASPÖCK-UNIBOX on the front connection rail with 24N, 24S & 15-pin sockets.
Connections in accordance with ISOs:
24N ISO-1185
24S ISO-3731
15-pin ISO-12098
Djdow Dl Hqepfx Ag Tskg
Steel Construction:
Steel structure made from high-strength fine-grained steels.
Steel grades:
– S355J2+N/S355MC (yield strength 355 MPa)
– S690QL/S700MC (yield strength 690 MPa)
Paintwork:
Entire steel structure automatically shot blasted after welding using a shot blasting system. Second blasting treatment with corundum for optimum adhesion of the coating system.
HRM metallisation of the complete chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimal corrosion protection.
Final painting: two coats of 2-pack topcoat, single-colour in a shade of choice according to the RAL 841GL system.
Rear section metallised and painted in RAL 9010 (pure white). Metallic finishes not available. Paint specification tested according to salt spray test ISO 9227-NSS.
Cavity sealing with special wax.
Options Included:
2'' kingpin
One galvanised steel front wall.
Yellow-red air couplings fitted to the galvanised front connection rail.
2 wheel chocks with holders on the front wall.
Mountings at the rear of the gooseneck for ALU ramps.
Further options available.
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici
FaymonvilleMAX Trailer 5-Achs-Tele-Semi mit hydr. Rampen
Ara
Durumu: yeni, boş ağırlık: 15.420 kg, azami yük ağırlığı: 61.080 kg, toplam ağırlık: 76.500 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, lastik boyutu: 235/75/r17,5, renk: gri, Donanım: ABS, Gooseneck:
Gooseneck with rear bevel approx. 750 mm x 10°
3 pairs of lashing rings
30 mm thick hardwood flooring
Load area:
Extendable load area with rear bevel approx. 500 mm x 8°
8 pairs of outward folding lashing rings
1 pair of flat-fitted lashing rings at the front of the load area
Recesses in the outer frame of the loading area for attaching tie-down straps
Approx. 48 mm thick hardwood flooring, checker plate covering above the axles
Two-piece steel ramps:
One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramp sections hydraulically lift and fold, hydraulically height-adjustable, and hydraulically shiftable. Maximum load per pair: 50,000 kg.
Landing legs:
• JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load)
Axles and tires:
BPW axles and suspension, 4th and 5th axles steering
Dedpfol Sl Izjx Ag Tokg
Technical axle load: 12,000 kg
4th and 5th axles with electro-magnetic reverse lockout, activated via reverse gear and manually
Tires 235/75 R 17.5 3PMSF
Braking system:
Braking system according to EU regulations with EBS-E (4S3M)
Sockets and lighting:
Electrical system in accordance with EU regulations, lighting 24 volts
ASPÖCK-NORDIK (ASS3)
ASPÖCK-UNIBOX at the front connector rail with sockets 24N, 24S & 15 pin
Connection compliant with ISO:
24N ISO-1185
24S ISO-3731
15 pin ISO-12098
Paintwork:
First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer
High-quality 2-component (2K) topcoat, single color MB 7350 Novagrau
Rear part metalized and painted in RAL 9010 (pure white)
No metallic paint possible
Steel construction:
Steel construction made of high-strength fine-grain steels
Steel grades:
S355J2+N/S355MC (yield strength 355 MPa)
S690QL/S700MC (yield strength 690 MPa)
Accessories:
One spare wheel with holder in front of bulkhead
2" kingpin
One galvanized steel front wall, approx. 400 mm high
Yellow-red air couplings mounted on the galvanized connector rail at the front
2 wheel chocks with holder on the front wall
Bracket at rear of gooseneck for ALU drive-on ramps
One holder for a rotating beacon at the rear of the trailer
Galvanized supports beneath the rear bevel of the loading area
White reflector tape according to EU regulations on the sides, extension, and rear in red
Electro-hydraulic unit at rear under the loading area
Mounts for warning signs with socket at the gooseneck and rear plate left and right
Ramp control valves fitted to right-hand side of the trailer
One mud flap at the rear of the trailer
Manual and documentation on USB stick
3.5" kingpin supplied loose
Plug-in ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm (LxH)
Rear galvanized drop-in stakes are removable (structure length approx. 2,560 mm)
3 pairs of WADER container pockets in the loading area for a 20' (30') or 40' container
6 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area
Galvanized extensions, extendable by approx. 230 mm per side
Lifting axle on the front axle with control via TEBS E, depending on the current axle load and current loading condition
Square cleats 20 x 20 mm every 200 mm on the outer frame of the loading area's bevel
On the checker plates, above the kingpin and the loa...
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX110 Semi-Tieflader
Ara
Durumu: yeni, azami yük ağırlığı: 37.680 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You will find our entire vehicle inventory, including immediately and short-term available vehicles, on our website.
Extract from the equipment features. Full equipment list available on request.
Gooseneck
* With approx. 30 mm hardwood flooring. Straight design at the rear of the gooseneck
* 3 pairs of lashing rings (LC 5,000 daN)
Load Platform
* Extendable version
* 5 pairs of outwards-folding lashing rings (LC 5,000 daN)
* 3 pairs of outwards-folding lashing rings (LC 10,000 daN)
* 1 pair of flat lashing rings at the front of the load platform (LC 10,000 daN)
* Cut-outs in the outer frame of the load platform for attaching tie-down straps (LC 2,000 daN)
* Approx. 48 mm hardwood flooring, over the axles with checker plate covering
Landing Gear
* JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Tyres
* 205/65 R 17.5
Axles
* BPW axles and suspension
* 1st axle fixed, all other axles hydro-mechanically forced-steered
* Air suspension with lift/lower valve
Braking System
* In accordance with EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit
Steel Construction
* Manufactured from high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Paintwork
* Premium and durable corrosion protection on the standard shot-blasted welded chassis via a 2-component (2K) zinc-rich primer
* High-quality 2-component (2K) single-colour topcoat in RAL 3002 carmine red
* Rims in silver
Included Accessories
* 2-inch kingpin
* Galvanized steel front wall, approx. 400 mm high
* At the galvanized front connection rail: yellow-red air couplings
* 4 chocks with holders at the front wall
Dsdpfev Etx Esx Ag Tskg
* Spare wheel carrier in front of the front wall
* Electro-hydraulic power pack
* Remote steerable axles from front and rear via cable remote control with push buttons, with single-track monitoring (installation in tractor unit not included)
* European reflective plates (red/yellow) at the rear of the trailer
* Yellow reflective tape in accordance with EU regulations on the sides, extension, and rear of the trailer
* Mounts for warning signs with socket at both the gooseneck and rear panel, both left and right
* Mount for a beacon at the rear of the trailer
* Galvanized folding supports under the inclined portion of the load platform
* Load gauge to determine axle loads, including load chart
* 7 pairs of WADER container locks for: 1x 20' or 1x 40' container on the load platform, 1x 40' container over the gooseneck or 2x 20' containers
* Support block with 1 pair of WADER container locks, load capacity approx.: 20,000 kg
* 7 pairs of pocket stakes for 100 x 50 mm plug-in stakes in the outer frame of the load platform
* Galvanized, extendable widening brackets by approx. 230 mm per side
* Adjustable hook-in rails for aluminium drive-up ramps at the rear of the vehicle
* 1 pair of recessed lashing rings along the central beam at the rear of the load platform (LC 10,000 daN)
* 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear
* BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable pump protection
* 2 LED reversing lights mounted at the rear
* Acoustic warning signal when reversing
* HRM Metallisation (High Resistance Metallisation)
Küçük ilan
Landsberg
2.202 km
Alçak şasi dorse
FAYMONVILLESatteltieflader MAX100-N-3B-9.30-U
Ara
Durumu: yeni, azami yük ağırlığı: 38.953 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2025, MAX100-N-3B-9.30-U
Technical Data
Speed: 80 km/h
Gross vehicle weight: 49,500 kg
Fifth wheel load: 18,000 kg
Axle load: 31,500 kg
Unladen weight (+/- 3%): 10,547 kg
Payload approx.: 38,953 kg
Gooseneck length: 3,850 mm
Fifth wheel height loaded: 1,200 mm
Loading platform length: 9,300 mm
Extendable by: 0 mm
Axle spacing: 1,360 mm
Steering angle radius (rear): 2,300 mm
Loading height at max. load: 860 mm
Overall width: 2,540 mm
Suspension travel: -55/+145 mm
Technical Description
Gooseneck:
Gooseneck with chamfered front corners at 45° and rear taper of approx. 750 mm x 10°.
3 pairs of lashing rings (LC 5,000 daN).
Hardwood flooring, 30 mm thick.
Loading platform:
Loading platform behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear slope of approx. 1,000 mm x 8°.
6 pairs of folding lashing rings facing outward (LC 5,000 daN).
2 pairs of folding lashing rings facing outward (LC 10,000 daN).
1 pair of inward folding lashing rings at the front central beam (LC 10,000 daN).
Cut-outs in the outer frame of the loading platform for attaching tensioning straps. (LC 2,000 daN).
Hardwood flooring approx. 48 mm thick, above the axles fitted with chequer-plate covering.
Ramps:
Two-piece steel ramps: One pair of galvanized, two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering.
Ramps with hydraulically foldable ramp sections, hydraulic lifting device and can be hydraulically adjusted laterally.
Maximum load per pair: 40,000 kg
Landing Legs:
JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load).
Tyres:
235/75 R 17.5 tyres as per manufacturer's selection.
Axles:
SAF axles, air-suspended, with drum brakes, featuring lift/lower function.
Last axle is force-steered with electro-magnetic reverse lock, activatable via reverse gear or manually.
Axle tools.
Brake System:
Brake system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor unit.
Steel Construction:
Steel construction made from high-strength fine-grained steel.
Steel grades:
S355J2+N/S355MC (yield strength 355 MPa)
S690QL/S700MC (yield strength 690 MPa)
Painting:
Premium and durable corrosion protection via sandblasted welded frame, primed with 2-component (2K) zinc dust primer. High-quality single-tone 2-component (2K) top coat in RAL colours of your choice. Rear metalized and painted in RAL 9010 (pure white). Metallic paint not possible.
Electrical System:
Electrical system compliant with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3)
Dodpfx Ageg Sk Tro Tokg
ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets. ISO-compliant connections.
24N ISO-1185
24S ISO-3731
15-pin ISO-12098
Accessories Included
2" king pin
One galvanized steel front bulkhead approx. 400 mm high.
At the galvanized front connection strip yellow/red airline couplings.
4 wheel chocks with holder on the front bulkhead (± 5kg).
Cable for supplying electro-hydraulic unit and/or electric winch (35 mm², 3.5 m long, max. 250A) between semi-trailer and tractor unit, with plug connection (ANDERSON-ANDERSON).
Galvanized folding supports under the rear slope of the loading platform.
Bracket for a rotary beacon at the rear of the trailer.
Control valves for the ramps installed on right-hand side of trailer (± 4kg).
Yellow reflective tape according to EU regulations on the sides and rear of the trailer.
Electro-hydraulic unit mounted at the rear under the loading
Küçük ilan
Dortmund
2.568 km
Platform yarı römork
FaymonvilleMAX Trailer 4-Achs-Ballastauflieger
Ara
Durumu: yeni, boş ağırlık: 9.600 kg, azami yük ağırlığı: 53.400 kg, toplam ağırlık: 63.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 12.400 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 1.340 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5, renk: gri, Donanım: ABS, Cargo area:
- Cargo area with approx. 30 mm thick hardwood floor
- 10 pairs of outward-folding lashing rings
Landing legs:
Dkedpfxjrq Dlfo Ag Tsg
- JOST landing gear with 2-speed gearbox for 24 t lifting capacity
Axles and tyres:
- BPW axles, technical capacity 10,000 kg, first axle fixed, all other axles hydraulically/mechanically forced-steered, mounted on a turntable
- Air suspension with raise/lower valve
- Axle tools
- Tyres: 385/65 R22.5
Braking system:
- WABCO braking system according to EU regulations with EBS-E (4S3M)
Steel construction:
- Steel construction made of high-strength fine grain steels
- Steel grades:
- S355J2+N / S355MC
- S690QL / S700MC
Electrics:
- Electrical system according to EU regulations, 24-volt lighting
- ASPÖCK-UNIBOX at the front connection strip, with 24N, 24S & 15-pin sockets
- Connection according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Painting:
- First-class, durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component zinc dust primer
- High-quality single-colour 2-component top coat in Nova grey
- Rear section metallized and painted in RAL 9010
Accessories included:
- Cargo area with approx. 30 mm thick hardwood floor
- 2" king pin
- Galvanized steel front wall approx. 1,200 mm high, EN12642-XL
- Yellow-red air couplings at the galvanized front connection strip
- 4 wheel chocks with holder at the front wall
- Holder for 1,000 mm posts in the rear central beam
- At the gooseneck and the rear plate, holders for warning panels including socket, left and right
- Remote steering from front and rear by cable remote control with push buttons, including single tracking control for the axles
- Electro-hydraulic power unit
- White reflective tape according to EU regulations on the sides of the trailer, red at the rear
- 12 pairs of posts pockets for 100 x 50 mm plug-in stakes in the side frame of the cargo area
- European reflector plates at the rear of the trailer
- A holder for a revolving beacon at the rear of the trailer
- A mudflap at the rear of the trailer
- Manual and description on USB stick
- BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable protection around the pump
- TPMS tyre pressure monitoring system:
- The tractor unit must be capable of receiving and displaying this data in order for correct indication
- Lift axle on the front axle controlled via TEBS E depending on current axle load and load condition
- Radio remote control for remote steering in addition to cable remote, with indicator lights on the receiver for single tracking control
- 5 pairs of crosswise stake pocket strips mounted in the cargo area for 100 x 50 mm plug-in stakes
- 80 km/h speed stickers at rear and both sides
- Adjustable access ladders mounted on the left and right sides in the direction of travel
- 2 reversing lights mounted on the rear plate
- Load gauge for axle loads including load diagram
- HRM metallization of the side frame: complete steel frame shot-blasted, then the defined visible areas metallized with ZINACOR 850 (85% zinc – 15% aluminium) hot finished
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX 710 Tiefbett 2+4 PA
Ara
Durumu: yeni, azami yük ağırlığı: 73.540 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: 3 aks, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website.
Selection of features. Full specification available on request.
Gooseneck:
* Gooseneck hydraulically liftable/lowerable and removable, length approx. 3,650 mm
* 2 pairs of folding lashing rings on the outside (LC 5,000 daN)
* 2 pairs of lashing rings on the gooseneck (LC 10,600 daN)
* 1 pair of lashing rings in the center section of the gooseneck (LC 10,600 daN)
* For 6 x 4 or 8 x 4 2-axle tractor units
Compact front running gear:
* Hook receivers front and rear, length: approx. 2,200 mm
* Chassis width: approx. 2,850 mm
Excavator deck:
Telescopic excavator deck with drive-over bridge hooks at the front and bolt-eye coupling at the rear
* Basic width: approx. 2,850 mm
* Length: approx. 6,650 mm
* Main beam height: approx. 400 mm
* Main beam width: approx. 1,350 mm
* Loading height approx. 550 mm, ground clearance approx. 150 mm
4-axle rear running gear:
* Mechanical bolt-eye coupling for attaching a lowbed at the front
* Rear end crossmember chassis width: approx. 2,850 mm
* Chassis length: approx. 5,480 mm
Pendulum axles, all axles hydro-mechanically forced-steered
* Technical axle load: 14,640 kg each (62 km/h)
* Hydraulic axle compensation
Tyres
* Front running gear:
* 8 x (manufacturer’s choice, M+S) 285/70 R19.5
* Tyres rear running gear:
* 16 x (manufacturer’s choice, M+S) 285/70 R19.5
* Load index 150/148J
Paintwork:
* Complete steel structure automatically shot-blasted by turbine system after welding. Second blasting treatment with corundum for optimal adhesion of coating system
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure maximum corrosion protection
* Final coating with two layers of 2K topcoat, single color in RAL 3002 Carmine Red, according to RAL System 841GL
Including the following accessories
* Steel front wall, approx. 400 mm high
* Plug-in aluminium side and rear walls on the gooseneck, approx. 400 mm high, anodized
* 3.5-inch king pin
* Truck hydraulic connection with flow control valve (20 l/min)
* Gallows for suspending supply lines, the tractor tank must be at least 80 l
* with MAX Trailer coupling pieces, otherwise quick couplings to be supplied ex works by customer
* BEKA-MAX central lubrication for one gooseneck with standard grease NLGI-2
* Tool kit Art No. 612452
* Multi-coupling hydraulic connections on the gooseneck
* Front running gear with separate air fitting for pneumatic screwdriver
* BEKA-MAX central lubrication for one 2-axle running gear with standard grease NLGI-2
* One 7-pin socket each left and right on the rear of the front running gear for warning panels
* Threaded insert option (Ø approx. 40 mm) every approx. 500 mm on the upper flange of the outer tube of the excavator deck for screw rings (LC 16,000 daN)
* Folding extensions with steel covers, width adjustable from approx. 2,850 mm to approx. 3,250 mm
Dsdpsxbmplsfx Ag Tjkg
* BEKA-MAX central lubrication for one 4-axle running gear with standard grease NLGI-2
* At the rear running gear, one socket for the cable remote control of the steering
* Rear running gear with trough
* Two INOX toolboxes, approx. 855 x 340 x 390 mm, mounted on the gooseneck left and right
* 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery
* Radio remote control:
* Operation of the power pack, start/stop of the diesel engine
* Operation of the steering, in addition to th
Küçük ilan
Landsberg
2.202 km
Alçak şasi dorse
FAYMONVILLEMAX TRAILER MAX100 4A 8.60 U
Ara
Durumu: yeni, toplam ağırlık: 58.000 kg, Üretim yılı: 2025, Low-bed semi-trailer MAX100 4 A 8.60 U
Technical Data
Speed: 80 km/h
Gross Vehicle Weight: 60,800 kg
Fifth Wheel Load: 18,000 kg
Axle Load: 42,800 kg
Tare Weight:
Payload:
Gooseneck Length: 3,850 mm
Loaded Fifth Wheel Height: 1,250 mm
Loading Platform Length: 8,600 mm
Extendable by: 5,400 mm
Axle Spacing: 1,360 mm
Steering Radius (rear): 2,300 mm
Loading Height at Max. Load: 860 mm
Overall Width: 2,540 mm
Suspension Stroke: -55/+145 mm
Technical Description
Gooseneck
With 45° chamfered front corners and rear chamfer approx. 760 mm x 10°
3 pairs of lashing rings (LC 5,000 daN)
30 mm thick hardwood floor
Extendable loading platform
With rear bevel approx. 1,000 mm x 8°
5 pairs of outward-folding lashing rings (LC 5,000 daN)
3 pairs of outward-folding lashing rings (LC 10,000 daN)
1 pair of flush-mounted lashing rings at the front of the loading platform (LC 10,000)
Approx. 48 mm thick hardwood flooring, chequer plate above the axles
Ramps
Two-part steel ramps
One pair of galvanized, two-part steel ramps, approx. 2,750 + 1,400 mm x 800 mm with approx. 48 mm hardwood flooring
Ramp sections hydraulically lifted and folded in, hydraulic lift and hydraulically adjustable position
Max. load per pair: 40,000 kg
Tyres
235/75 R 17.5
Brake System compliant with EU regulations, with EBS-E (4S3M)
Without connection lines to the tractor unit
Paintwork
First-class, long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by 2-component zinc dust primer
High-quality 2-component (2K) top coat, single colour, in RAL shades of choice
Rear section metallized and painted in RAL 9010 (Pure White)
Landing Legs:
JOST mechanical landing legs with 2-speed gearbox for 24t
Lifting capacity (50t test load)
Steel construction made from high-strength fine-grained steels.
Steel Qualities:
Steel construction made from high-strength fine-grained steel
S355J2+N/S355MC (Yield Strength 355MPa)
S690QL/S700MC (Yield Strength 690MPa)
Electrical System according to EU regulations, lighting: LED 24 Volt ASPÖCK-NORDIK (ASS3)
ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets
Connection as per ISO.
24N IS0-1185
24S IS0-3731
15-pin IS0-12098
Accessories included:
One galvanized steel headboard approx. 400 mm high
2" king pin
4 wheel chocks with holders on the headboard
One holder for revolving beacon at rear of trailer
SAF axles, two rigid axles, one self-steering axle, air suspension, with drum brakes, with raise/lower function
The self-steering axle with electromagnetic reverse lock, can be activated by reverse gear or manually
Axle tools included
Dkodpfx Ageg Sk T De Teg
Support for ALU approach ramps at the rear of the gooseneck
Galvanized folding supports under the loading platform chamfer
Mechanical safety lock for the loading platform extension
One spare wheel with holder in front of the headboard
Yellow reflective tape as per EU regulations on sides, extension, and rear of trailer
At the front galvanized connector strip, yellow-red air couplings
On gooseneck and rear apron left and right, mounts for warning plates, including sockets
A mudflap at the rear of the trailer
Manual and description
On the gooseneck: Plug-in aluminium sideboards and rear wall, approx. 2,440 x 400 mm (LxH)
Rear galvanized stanchions are removable
Body length approx. 2,560 mm, +/- 46 kg
3 pairs of WADER container locks in the loading platform for a 20', 30', or 40' container (±30 kg)
6 pairs of pockets for plug-in stanchions
Küçük ilan
Dortmund
2.568 km
Platform yarı römork
FaymonvilleMAX Trailer-3-Achs-Mega-Tele-Plateau-nachlaufgel.
Ara
Durumu: yeni, azami yük ağırlığı: 36.020 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.540 mm, süspansiyon: hava, lastik boyutu: 435/50 R 19.5, renk: gri, Donanım: ABS, Cargo Area:
- Extendable cargo area design with pneumatically actuated locking
- 2 pairs of lashing rings (LC 5,000 daN)
- 1 pair of lashing rings (LC 10,000 daN)
- 6 pairs of fold-out lashing rings (LC 5,000 daN)
- 2 pairs of fold-out lashing rings (LC 10,000 daN)
- Cut-outs in the external frame of the cargo area for securing belts
Axles and Tyres:
- BPW axles, air-suspended, with disc brakes (377 mm), height adjustment function (raise/lower)
- Self-steering axles with electromagnetic reversing lock, activated via reverse gear or manually
- Axle tools included
- Tyres: 435/50 R 19.5
Dkedpfx Agei Dwlws Tjg
Brake System:
- Brake system compliant with EU regulations, with EBS-E (2S2M)
Paintwork:
- First-class, long-lasting corrosion protection for the standard shot-blasted welded frame, ensured by a two-component zinc dust primer (2K)
- High-quality single-tone two-component topcoat (2K) in Novagrau
- Rear section metallized and painted in RAL 9010 (Pure White)
- Metallic paint not possible
Landing Gear:
- JOST landing gears (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load)
Steel Construction:
- Steel construction from high-tensile fine-grain steels
- Steel grades:
- S355J2+N/S355MC (yield strength 355 MPa)
- S690QL/S700MC (yield strength 690 MPa)
Electrical System:
- Electrical system compliant with EU regulations, 24 V ASPÖCK-NORDICK (ASS3) lighting
- ASPÖCK-UNIBOX at the front connection panel with 24N, 24S and 15-pin sockets
- Connections according to ISO:
- 24N ISO-1185
- 24S ISO-3731
- 15-pin ISO-12098
Accessories Included:
- Yellow-red air couplings on the galvanized front connection panel
- 2 wheel chocks with brackets
- 2" king pin
- Galvanized steel front wall approx. 1,600 mm high
- Yellow reflector tape according to EU regulations on the sides, extension, and rear of the trailer
- European reflective plates (red-yellow) at the rear of the trailer
- Cargo floor made of approx. 38 mm thick hardwood
- 10 pairs of stake pockets for 100 x 50 mm plug-in stakes integrated in the external frame of the cargo area
- 1 spare wheel holder under the cargo area on the right in driving direction
- Manual and documentation on USB stick
- 1 mud flap at the rear of the trailer
- 1 bracket for a beacon at the rear of the trailer
- At the goose neck and on each side of the rear panel, 1 bracket for warning signs incl. socket
- 1 INOX toolbox, crosswise under the cargo area (1,000 x 400 x 2,500 mm)
- 6 pairs of WADER container locks in the cargo area for 1 x 20ft container, 2 x 20ft containers or 1 x 40ft container; an additional locking position in the extension for one 45ft container
- 3 pairs of transverse stake pocket rails installed across the cargo area for 100 x 50 mm plug-in stakes
- 60 km/h speed sticker at the rear
- 2 reversing lights mounted on the rear panel
- Four warning signs, extendable by approx. 400 mm (approx. 423 x 423 mm), with position light
- Mounting bracket for beacon on the warning signs
- HRM metalization (High Resistance Metallisation) of the external frame
- Complete steel structure shot-blasted; then, the defined visible surfaces are metal-coated with ZINACOR 850 (zinc 85% - aluminum 15%) by thermal spraying
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX510 Tiefbett 3x12 t PA
Ara
Durumu: yeni, azami yük ağırlığı: 48.010 kg, toplam ağırlık: 66.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, You can find our complete range of vehicles available for immediate and short-term delivery on our website.
Excerpt from the equipment features. Full specification available on request.
Gooseneck:
* Gooseneck in SNT design for optimized load length, length approx. 3,700 mm
* Gooseneck hydraulically liftable/lowerable and detachable
* For tractor units: 6 x 4 or 8 x 4
Lowbed:
* Lowbed with external beams, extendable, SUPER LOW design, length approx. 7,550 mm
* Lowbed with fixed hardwood floor, approx. 40 mm thick, and mechanical locking
* Supply lines routed protected inside the extendable beams, adapting automatically to the respective lowbed length
* 7 pairs of lashing rings foldable outward (approx. LC 10,000 daN)
* 6 pairs of threaded blocks on the inner beam for mounting of bolted RUD rings
Rear running gear:
* Rear chassis with closed outer frame, checker plate covering, and continuous prism excavator recess, approx. 1,450/900 x 505 mm, open at rear
* 2 pairs of lashing rings foldable outward (approx. LC 10,000 daN)
* 1 pair of horizontal lashing rings in the recess (approx. LC 10,000 daN)
* 2 pairs of horizontal lashing rings in the recess (approx. LC 16,000 daN)
* 2 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame
PENDLE-AXLE:
* PENDLE-AXLE, all axles hydro-mechanically forced-steered
* Hose rupture valve on axle compensation cylinder with automatic RESET function
* Hydraulic cylinders with shut-off valves and pre-lock for securing in lifted position
* Technical axle load: 12,000 kg each
* Hydraulic axle compensation
Dedpfexbmprsx Ag Tokg
* Axle tools
Tyres:
* Tyres 245/70 R 17.5 3PMSF – manufacturer at our discretion
* Load index (146/146F)
Brake system:
* Wabco brake system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor unit
Paintwork:
* Complete steel structure automatically shot blasted after welding using a blast wheel system
* Second blasting process with corundum for optimal coating adhesion
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection
* Final coating with two layers of 2K topcoat, solid color RAL 3002 carmine red according to the RAL 841GL system
Including the following accessories:
* Preparation for mounting of bolt-on container positions for 1x 20' or 1x 40' container on the outer beams
* Without container locks
* 3.5 inch king pin
* One galvanized steel front wall, approx. 400 mm high
* Remote auxiliary steering front and rear via cable remote with push-button, single-track axle monitoring (installation in tractor unit not included)
* Electro-hydraulic power unit
* On the gooseneck: plug-in aluminum side walls and rear wall approx. 2,000 x 400 mm (L x H)
* Rear galvanized plug-in stakes removable (body length approx. 2,120 mm)
* Hydraulic connections from gooseneck to lowbed with multi-coupling instead of screw couplings. No warranty on seals.
* Separate air connection with air gun at the gooseneck
* 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area
* One INOX tool box, approx. 1,350 x 400 x 400 mm, on the gooseneck
* 2 pairs bolted lashing rings M20 (LC 5,000 daN)
* 2 pairs bolted RUD rings VLBG-4 M24 (LC 8,000 daN)
* Folding widening boards, approx. 230 mm per side, widening boards made of hardwood. The maximum load is on an area of approx. 200 x 200 mm.
Küçük ilan
Landsberg
2.202 km
Alçak şasi dorse
FAYMONVILLECombi-Z-12(3X+1X+8X)HH-V-AA-30-18.50-17.5-2.85-P
Ara
Durumu: yeni, dingil konfigürasyonu: 3 aks, Üretim yılı: 2025, Further information here:
Dedjv D Abmspfx Ag Tokg
Küçük ilan
Dortmund
2.568 km
Platform yarı römork
FaymonvilleMAX Trailer 3-Achs-Plateau-Sattelaufl.
Ara
Durumu: yeni, boş ağırlık: 6.350 kg, azami yük ağırlığı: 38.650 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.540 mm, süspansiyon: hava, lastik boyutu: 385/65 R22,5, Donanım: ABS, Platform:
- 2 pairs of external foldable lashing rings (LC 5,000 daN)
- 24 pairs of cutouts in the platform’s outer frame for attaching tensioning straps (LC 2,000 daN)
Landing Gear:
- JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load)
Axles and Tyres:
- BPW axles, air suspended, with disc brakes (430 mm), with raise/lower function
- Tyres: 385/65 R 22.5
Braking System:
- WABCO braking system according to EU regulations with EBS-E (2S2M)
Paintwork:
- Premium, long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer
- High-quality 2-component (2K) topcoat in single-tone MB 7350 Novagrau
- Rear section metallized and painted in RAL 9010 (pure white)
- Metallic paint not possible
Steel Construction:
- Steel construction made of high-strength fine-grain steels
- Steel grades:
- S355J2+N/S355MC (yield strength 355MPa)
- S690QL/S700MC (yield strength 690MPa)
Electrical System:
- Electrical system in accordance with EU regulations
- Lighting 24 Volt
- ASPÖCK-NORDIK (ASS3)
- ASPÖCK-UNIBOX at the front terminal strip with sockets 24N, 24S & 15-pin
Dkodpfeiu Etksx Ag Tsg
- Wiring according to ISO norms:
- 24N ISO-1185
- 24S ISO-3731
- 15-pin ISO-12098
Accessories included:
- Yellow-red air couplings on the galvanized front terminal strip
- 4 wheel chocks with holder
- 2" king pin
- A galvanized steel front wall approx. 1,600 mm high. EN12642-XL
- White reflective tape according to EU regulations on the sides and red on the trailer’s rear
- European reflective plates (red-yellow) at the rear of the trailer
- Platform with approx. 30 mm thick hardwood floor, fitted in omega profiles
- 10 pairs of stake pockets for 100 x 50 mm slot-in stakes in the platform’s outer frame
- 3 pairs of transverse stake pocket strips mounted on the platform for 100 x 50 mm slot-in stakes
- Storage tray for 1,000 mm slot-in stakes at the rear in the central beam
- 1 spare wheel carrier under the platform on the right side (direction of travel)
- One mudflap at the rear of the trailer
- Manual and documentation on USB stick
- One bracket for a rotating beacon at the rear of the trailer
- On the gooseneck and rear apron, brackets on both sides for warning signs including socket
- 6 pairs of WADER container locks in the platform for 1x 20ft container, 2x 20ft containers, or 1x 40ft container, flush with the rear
- 80 km/h speed limit stickers at the rear and on both sides
- Four warning signs extendable by approx. 400 mm, each approx. 423 x 423 mm, with LED position light
- Load gauge for axle load determination including load chart
- HRM Metallization (High Resistance Metallisation) of the outer frame
- Complete steel structure shot-blasted, then the defined visible surfaces metalized and hot-finished with ZINACOR 850 (zinc 85% - aluminium 15%)
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX110 Semi-Tieflader
Ara
Durumu: yeni, azami yük ağırlığı: 45.820 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, Donanım: ABS, You can find our complete range of vehicles, including those available for immediate and short-term delivery, on our website.
Excerpt from the equipment features. Full equipment details available upon request.
Gooseneck:
* Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick
Extendable loading platform:
* Extendable loading platform with rear chamfer approx. 1,000 mm x 8°
* 5 pairs of outward-folding lashing rings (LC 5,000 daN)
* 3 pairs of outward-folding lashing rings (LC 10,000 daN)
* 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN)
* Cut-outs in the outer frame of the loading area for securing straps (LC 2,000 daN)
* Hardwood flooring approx. 48 mm thick; above the axles, checkered plate covering
Axles:
* BPW axles and suspension
* 1st axle rigid, all other axles hydro-mechanically force-steered
* Technical axle load: 12,000 kg each
* Air suspension with lift and lower valve
* Axle tools
Tyres:
* Tyres 245/70 R 17.5 3PMSF, Load index (146/146 F)
* Manufacturer of our choice
* TPMS tire pressure monitoring system according to ECE R 141
* Data transmission to the tractor unit via standard EBS interface ISO 11992
* For correct display, the tractor unit must be able to receive and display this data
Landing Legs:
* JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Brake System:
* Wabco braking system according to EU regulations with EBS-E (4S3M), without connections to the tractor unit
Paintwork:
* Complete steel construction automatically shot-blasted after welding using a wheel blasting system
* Second blast treatment with corundum for optimal adhesion of the coating system
* Final coating with 2 layers of 2K topcoat, single color in RAL 3002 Carmine Red in accordance with the RAL 841GL system
* Rims in silver grey
* Rear section metallized and painted in RAL 9010 (pure white)
* No metallic paint possible
* Paint structure tested in salt spray test according to ISO 9227-NSS
* Cavity sealing with special wax
Steel construction:
* Steel construction made from high-strength fine-grain steels
* Steel quality: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa)
Electrical system:
* Electrical system according to EU regulations
* Lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* All LED side marker lights flash with the indicator
* ASPÖCK-UNIBOX at the front connection bar with sockets 24N, 24S & 15-pin connection according to ISO
* 24N ISO-1185 24S ISO-3731 15-pin ISO-12098
Incl. the following additional equipment:
* 2-inch kingpin
* One galvanized steel front wall, approx. 400 mm high
* Yellow-red air couplings at the galvanized front connection bar
* Electro-hydraulic unit
Dkjdpfx Agoxbmpfo Tjg
* Remote steering from front and rear via cable remote control with pushbuttons, including axle tracking control (without installation in the tractor unit)
* Galvanized folding supports under the rear chamfer of the loading area
* 1 pair of recessed lashing rings along the central beam at the rear chamfer (LC 10,000 daN)
* Removable aluminium drop sides and rear wall on gooseneck, approx. 2,440 x 400 mm (L x H)
* The rear galvanized stanchions are removable. (Body length approx. 2,560 mm)
* One galvanized toolbox, integrated in the beveled gooseneck
* 3 pairs of WADER container pockets in the loading area for a 20' (30?) or a ...
Küçük ilan
Landsberg
2.202 km
Alçak şasi dorse
FAYMONVILLEMAX510-Z-2H-ATX-A-6.85-PA
Ara
Durumu: yeni, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2025, Technical Data MAX510-Z-2H-ATX-A-6.85-PA
Speed: 80 km/h
Gross weight: 47,000 kg
Fifth wheel load: 23,000 kg
Axle load: 24,000 kg
Gooseneck length: 3,750 mm
Loaded saddle height: 1,200 mm
Rear steering radius: 2,300 mm
Loading platform length: 6,850 mm
Extendable by: 5,500 mm
Loading height at maximum load: 350 mm
Chassis length: 2,600 mm
Rear chassis loading height at max. load approx: 1,005 mm
Suspension travel: -150/+450 mm
Axle spacing: 1,360 mm
Overall width: 2,540 mm
Gross weight depends on fifth wheel load.
Lowbed: Lowbed with external beams, extendable version "SUPER LOW" design, length approx. 6,850 mm.
Lowbed with fixed hardwood floor approximately 40 mm thick and mechanical locking device. Supply lines are protected inside the extendable beams and automatically adjust to the respective lowbed length.
5 pairs of lashing rings, foldable outward (LC 10,000 daN).
6 pairs of threaded blocks on the inner beam for mounting screwable RUD rings.
Rear chassis: Rear chassis with closed external frame, checker plate covering and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at rear.
2 pairs of lashing rings, foldable outward (LC 10,000 daN).
1 pair of lashing rings, flat in the trough (LC 8,000 daN + 5,300 daN).
2 pairs of pocket sockets for stanchions 100 x 50 mm in the external frame.
Gooseneck: Gooseneck in SNT design to optimize usable platform length, length approx. 3,785 mm.
Gooseneck hydraulically lift/lowerable and detachable.
Technical fifth wheel load: 23,000 kg
For tractor units: 4x2, 6x2, and 6x4
PENDLE-AXLE: “PENDLE-AXLE”, all axles hydro-mechanically forced steered. Hose rupture valve on the axle compensation cylinder with automatic RESET function. Hydraulic cylinders with shut-off valves and plug pins for securing in raised position. Axles finished with two coats of 2-component paint, single color "FAY-Grey-34-0260".
Technical axle load: 12,000 kg
Hydraulic axle compensation. Axle tools.
Brake system: Brake system in accordance with EU regulations, with EBS-E (2S2M) without connecting lines to the tractor unit.
Electrical system: Electrical system according to EU regulations, 24V lighting ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connection strip with 24N, 24S, and 15-pin sockets. Connection according to ISO:
- 24N ISO-1185
- 24S ISO-3731
- 15-pin ISO-12098
Steel construction: Steel construction made of high tensile fine-grained steels. Steel grades:
Djdpfx Aoizu Nwjg Tjkg
- S355J2+N/S355MC (yield strength 355MPa)
- S690QL/S700MC (yield strength 690MPa)
Painting: Premium, long-lasting corrosion protection of the standard shot-blasted welded frame, ensured by a two-component (2K) zinc dust primer. Premium two-component (2K) topcoat in one RAL color of your choice. Rear section metallized and painted in RAL 9010 (Pure White). No metallic paint possible.
Tyres: Tyres 245/70 R 17.5 3PMSF
Manufacturer’s choice. Load index (146/146F).
Prepared for fitting of bolt-on container positions for 1x 20' or 1x 40' container on the external beams. Without container locks.
• 2” king pin
• Galvanized steel front wall approx. 400 mm high
• 1 spare wheel with holder in front of the front wall
• 2 wheel chocks with holder on the front wall
• Yellow-red air couplings on the galvanized connection strip at the front.
Remote steering from front and rear via cable remote control with pushbuttons, with single-track axle monitoring (without installation in the tractor unit).
Hydraulic connections from the gooseneck to the lowbed
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader
Ara
Durumu: yeni, azami yük ağırlığı: 39.670 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, Donanım: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website.
Summary of equipment. Full equipment details available upon request.
Djdpjxarlvsfx Ag Tekg
Gooseneck:
* Gooseneck with approx. 30 mm thick hardwood flooring
* Gooseneck at the rear, straight design
* 3 pairs of lashing rings (LC 5,000 daN)
Loading Area:
* Extendable loading area
* 5 pairs of fold-out lashing rings on the outside (LC 5,000 daN)
* 3 pairs of fold-out lashing rings on the outside (LC 10,000 daN)
* 1 pair of lying lashing rings at the front of the loading area (LC 10,000 daN)
* Cutouts in the outer frame of the loading area for attaching tension belts (LC 2,000 daN)
* Approx. 48 mm thick hardwood flooring, diamond plate over the axles
Landing Legs:
JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Axles:
* BPW axles, two fixed and two self-steering axles
* Air suspension with lifting/lowering function
* Self-steering axles with electromagnetic reversing lock, can be activated via reverse gear or manually
* Drum brakes
* Axle tools
Tyres:
* 205/65 R 17.5
* Brand of our choice
* TPMS tyre pressure monitoring system according to ECE R 141
* Data transmission to the tractor via standardised EBS interface according to ISO 11992
* For correct display, the tractor unit must be able to transmit and display this data
Brake System:
* Brake system in compliance with EU regulations with EBS-E (4S3M), without connector lines to the tractor unit
Steel Construction:
* Steel structure made from high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Painting:
* Entire steel structure automatically shot-blasted after welding
* Secondary blast treatment with corundum for optimal coating adhesion
* HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection
* Final paint finish with 2 coats of 2K topcoat, single colour in RAL 3002 carmine red, according to RAL 841GL
* Rims in silver
* Rear section metallised and painted in RAL 9010 (pure white)
* Metallic paints not possible
* Paint system tested in salt spray test according to ISO 9227-NSS
* Sealing of cavities with special wax
Electrical System:
* Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting
* All LED side marker lights flash with the indicators
* ASPÖCK-UNIBOX on the front connection rail with 24N, 24S & 15-pin sockets; connections according to ISO (24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098)
Accessories included:
* 2-inch king pin
* One spare wheel holder in front of the bulkhead
* Yellow-red air couplings on the galvanised front connection rail
* Galvanised drop supports under the ramped section of the loading area
* One galvanised steel bulkhead (EN12642-XL), approx. 1,600 mm high
* Removable ALU side boards and rear gate approx. 2,440 x 400 mm (L x H) on the gooseneck
* Rear galvanised plug-in stanchions are removable (body length approx. 2,560 mm)
* Support block with 1 pair of WADER container pockets; fifth wheel load approx. 20,000 kg
* 7 pairs of WADER container pockets for 1x 20' container in the loading area
* 1x 40' container in the loading area, 1x 40' container above the gooseneck, 2x 20' container
* 7 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading area
* One galvanised crosswise holder under...
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Landsberg
2.202 km
Alçak şasi dorse
FAYMONVILLEPlateauauflieger MAX200-N-3A-13.60-19.5-2.54
Ara
Durumu: yeni, azami yük ağırlığı: 36.156 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2025, MAX200-N-3A-13.60-19.5-2.54
Technical Data
Speed: 80 km/h
Gross vehicle weight: 45,000 kg
Fifth wheel load: 18,000 kg
Axle load: 27,000 kg
Tare weight (+/- 3%): 8,844 kg
Payload approx.: 36,156 kg
Platform length: 13,600 mm
Loaded fifth wheel height: 950–1,050 mm
Swing clearance at rear: 2,300 mm
Extendable by: 3,400 mm
Axle spacing: 1,360 / 1,405 mm
Overall width: 2,540 mm
Technical Description
Load platform:
Load platform in extendable design with pneumatically operated locking mechanism.
2 pairs of lashing rings (LC 5,000 daN).
1 pair of lashing rings (LC 10,000 daN).
6 pairs of fold-out lashing rings (LC 5,000 daN).
2 pairs of fold-out lashing rings (LC 10,000 daN).
Cut-outs in the outer frame of the platform for attaching tension straps (LC 2,000 daN).
Dkjdpfx Asg Sk Tveg Tjg
Landing legs:
JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load).
Axles:
SAF axles: SAF CD axles, air-suspended, with disc brakes (377 mm), with lift/lower function (ET 120).
Trailing steering axles with electro-magnetic reversing lock, activated via reverse gear or manually.
Axle tools (± 80 kg).
Brake system:
Brake system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit.
Steel construction:
Steel structure made of high-strength fine-grain steels.
Steel grades:
S355J2+N / S355MC (yield strength 355 MPa)
S690QL / S700MC (yield strength 690 MPa)
Paintwork:
Premium, long-lasting corrosion protection for the standard shot-blasted welded frame ensured by a two-component (2K) zinc-rich primer. High-quality two-component (2K) topcoat, single-colour, in RAL tones of your choice.
Rear section metallised and painted in RAL 9010 (pure white).
Metallic paint not available.
Electrical system:
Electrical system according to EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3).
ASPÖCK-UNIBOX on the front connector panel with sockets 24N, 24S & 15-pin.
Connections according to ISO:
24N ISO-1185
24S ISO-3731
15-pin ISO-12098
Standard accessories included:
Yellow-red air couplings on the galvanised front connector panel.
2 wheel chocks with holders.
2" kingpin.
Galvanised steel front wall, approx. 2,200 mm high (± 105 kg), EN12642-XL compliant.
Yellow reflector tape according to EU regulations; fitted along the sides, on the extension, and the rear of the trailer.
European reflective warning plates (red-yellow) at the rear of the trailer.
Platform with approx. 38 mm hardwood floor (± 320 kg).
10 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the platform (± 30 kg).
1 spare wheel holder under the platform, right-hand side in direction of travel.
Tyres 435/50 R 19.5, manufacturer’s choice.
One mud flap at the rear of the trailer.
Manual and documentation on USB stick.
Bracket for rotating beacon at the rear of the trailer.
At the gooseneck and rear panel, left and right, brackets for warning signs, incl. socket.
One transverse INOX toolbox under the platform (1,000 x 400 x 250 mm) (± 135 kg).
6 pairs of WADER container locks in the platform for 1 x 20’ container, 2 x 20’ containers or 1 x 40’ container; an additional locking position provided in the extension for a 45’ container (± 90 kg).
4 pairs of WADER container locks (± 60 kg).
10 pairs of galvanised plug-in stakes approx. 100 x 50 mm, 1,000 mm high (± 220 kg).
3 pairs of crosswise stake pocket bars mounted in the platform for plug-in stakes 100 x 50 mm (± 95 kg).
Storage for 1,000 mm plug-in stakes (± 45 kg).
1 spare wh
Küçük ilan
Landsberg
2.202 km
Alçak şasi dorse
FAYMONVILLEMega-Z-3H-V-AT-A-25ZT-6.50(2.74)-17.5-2.75-PA-13
Ara
Durumu: yeni, azami yük ağırlığı: 44.000 kg, toplam ağırlık: 61.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2025, Further information here:
Dksdjv D Abtspfx Ag Tjg
Küçük ilan
Landsberg
2.202 km
Alçak şasi dorse
FAYMONVILLEMAX510-Z-2-ATX-A-6.85
Ara
Durumu: yeni, azami yük ağırlığı: 34.104 kg, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2025, Further information here:
Djdpfsv D Abgsx Ag Tskg
Küçük ilan
Landsberg
2.202 km
Alçak şasi dorse
FAYMONVILLEMultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR
Ara
Durumu: yeni, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2025, 3-axle MULTIMAX *PLUS low bed semi-trailer, air-suspended and hydraulically forced-steered axles.
Dedpjizu Ntefx Ag Tokg
Technical data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR
Speed: 80 km/h legal
Gross vehicle weight: 49,500 kg 31,500 kg
Fifth wheel load: 18,000 kg
Axle load: 31,500 kg 31,500 kg
Gooseneck length approx.: 3,900 mm
Gooseneck width approx.: 2,480 mm
Kingpin turning radius to rear approx.: 2,100 mm
Saddle height loaded approx.: 1,205 mm
Loading platform length approx.: 9,600 mm
Extendable by approx.: *
Loading platform width approx.: 2,540 mm
Load height at max. payload approx.: 890 mm
Suspension stroke approx.: -55/+145 mm
Axle spacing: 1,360 mm
*Gross weight dependent on fifth wheel load: Yes
Special permit required if country-specific regulations are exceeded.
Technical Description
Gooseneck: Gooseneck in SNT design to optimize loading platform length, length approx. 3,900 mm, rear with bevel approx. 1,000 mm x 6°.
Technical fifth wheel load: 18,000 kg.
For tractor units: 4x2 and 6x2.
Loading platform: Loading platform, length approx. 9,600 mm with rear bevel approx. 900 mm x 6°.
Loading platform behind gooseneck hydraulically liftable and lowerable, length approx. 3,000 mm, load capacity up to approx. 9,000 kg.
Ramps: DR-10-900-4920-GR-HV-AXS
One pair two-piece AXS steel ramps with a length of approx. 4,920 mm and a width of approx. 900 mm.
Open grating surface.
Hydraulically foldable ramp tips.
Ramps are individually hydraulically adjustable approx. 235 mm outward and approx. 365 mm inward.
Maximum load and approach angle as per technical data sheet: C470319
Maximum ramp angle with lowered platform: 9°
Axles and suspension: BPW axles and suspension, all axles hydro-mechanically forced-steered.
Technical axle load: 12,000 kg
Air suspension with lift and lower valve.
Axle tools.
Tyres: 235/75 R 17.5 3PMSF dual tyres. Manufacturer at our discretion. Load index 143/141J (144/144F)
Brake system: WABCO EBS-E braking system according to EU regulations. Without connection cable to the tractor unit.
Lighting system: 24-volt lighting system in "ASPÖCK-NORDIK full LED" configuration according to EU regulations. (ASS 3)
Metallisation: Complete HRM metallisation (High Resistance Metallisation). Entire steel structure shot-blasted, then hot-dip refined with ZINACOR 850 (zinc 85% - alu 15%).
Painting 6-coat final treatment: Whole steel structure shot-blasted after welding. 1 coat of zinc-based primer, 1 coat of adhesion promoter. Topcoat with 2 layers of 2-component (acrylic) paint, single-color to RAL palette as chosen, followed by sealing the cavities with special wax. Rims in silver. Multi-color and custom painting available at extra charge.
Steel construction: High-strength fine-grained steel construction. Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa). Welders certified to DIN EN 287-1. MAG welding process per EN ISO 4063. Shielding gas M21 per EN ISO 14175.
Front wall made of steel, removable, approx. 400 mm high.
Connection panel for supply lines to the tractor unit, mounted at the height of the outer frame profile.
ASPÖCK-UNIBOX on the front connection panel with sockets 24N, 24S & 15-pin.
24N connection as per ISO-1185
24S connection as per ISO-3731
15-pin connection as per ISO-12098
If your pin assignment differs from the ISO standard, please inform us.
"Anderson" socket on the front connection panel. Rema 78051-00 & Amp. 150 V.
Cable for electric-hydraulic unit and/or electric winch (
Sizin için aramayı kolaylaştırıyoruz: "faymonville diğer"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.
Kullanılmış Faymonville Diğer (220)
Şimdi 120.000’dan fazla ikinci el araçla TruckScout24 genelinde arama yapın.En popüler kategorileri inceleyin:
- Diğer
- Diğer Diğer
- Diğer Diğer Cihazlar
- Diğer Konteynerler
- Diğer Sabanlar
- Diğer Çift Katlı
- Faun Diğer
- Faymonville Ilo Yarı Römorklar
- Faymonville Max Yarı Römorklar
































































































































































































































































































