Kullanılmış Faymonville Max Trailer 3-Assige Dieplader Extendable satın al (53.279)

Durum: ikinci el, azami yük ağırlığı: 25.630 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 11/2024, bir sonraki muayene (TÜV): 11/2026, Donanım: ABS,

Durum: ikinci el, azami yük ağırlığı: 47.300 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 03/2025, bir sonraki muayene (TÜV): 03/2026, Donanım: ABS, Ekipman listesinden bir bölüm. Tam ekipman listesi talep üzerine sağlanır. Hedpfozkx Huox Ap Isfi * Kaz boynu, ön kısımda yaklaşık 45° eğimli köşelerle ve arka kısımda yaklaşık 750 mm x 10° eğimle. * 3 çift bağlama halkası (LC 5.000 daN) * Yaklaşık 30 mm kalınlığında sert ahşap kaplama * Yükleme alanı, arka kısımda yaklaşık 1.000 mm x 8° eğimle, uzatılabilir şekilde. * Dışa doğru katlanabilen 5 çift bağlama halkası (LC 5.000 daN) * Dışa doğru katlanabilen 3 çift bağlama halkası (LC 10.000 daN) * 1 çift bağlama halkası, yükleme alanının ön kısmında yatay olarak (LC 10.000 daN) * Gergi bantlarının takılması için yükleme alanının dış çerçevesinde oyuklar (LC 2.000 daN) * Yaklaşık 48 mm kalınlığında sert ahşap kaplama * Akslar üzerinde tırtıklı metal levha kaplama * Şasi destek ayakları: JOST şasi destek ayakları (mekanik), 2 vitesli şanzımanlı, 24 ton kaldırma kapasiteli (50 ton test yükü) * Lastikler: 235/75 R 17.5 3PMSF * Akslar: BPW akslar, iki sabit aks, iki takipçili aks, hava süspansiyonlu, tamburlu frenli ve kaldırma/alçaltma fonksiyonlu. * Elektro-manyetik geri vites kilidi ile donatılmış takipçili akslar, geri vites veya manuel olarak etkinleştirilebilir. * Fren sistemi: AB yönetmeliklerine uygun WABCO fren sistemi, EBS-E (4S3M), çekiciye bağlantı hatları olmadan. * Boya: Yüksek kaliteli, iki bileşenli (2K) tek renkli üst kat boya, RAL 3002 karmin kırmızısı. * Aksesuarlar: * Ön duvarın önünde bir yedek lastik tutucu (yedek lastik hariç) * 2 inçlik König pim * Yaklaşık 400 mm yüksekliğinde galvanizli çelik ön duvar * Ön taraftaki galvanizli bağlantı çubuğunda sarı-kırmızı hava bağlantı elemanları * Ön duvarda bulunan tutuculu 4 adet tekerlek takozu * Kaz boynunun arka kısmında alüminyum rampalar için yuva * Yükleme alanının eğiminin altında galvanizli katlanabilir destek ayakları * Römorkun arkasında, etrafı aydınlatma için bir lamba tutucu * AB yönetmeliklerine uygun, yanlarda, uzatılabilir kısımda ve römorkun arkasında sarı reflektör şeridi * Kaz boynunda ve arka sacda, sol ve sağ tarafta, uyarı levhaları için tutucular (priz dahil) * Aks yüklerinin belirlenmesi için yükölçer (yük diyagramı dahil) * Ek olarak: * Kaz boynunda, takılabilir alüminyum yan duvarlar ve arka duvar, yaklaşık 2.440 x 400 mm (U x Y). * Eğimli kaz boynuna entegre, galvanizli bir alet kutusu. * Yükleme alanında, 20' (30') veya 40' bir konteyner için 3 çift WADER konteyner cepleri. * Römorkun arkasında, alüminyum rampalar için kaydırılabilir takma çıtaları. * Yükleme alanının dış çerçevesinde, yaklaşık 100 x 50 mm boyutlarında 6 çift takma çıtası için cepler. * Galvanizli, her iki tarafta yaklaşık 230 mm uzatılabilen genişletmeler. * Ön aksa takılan, TEBS E ile kontrol edilen kaldırma aksı. * Arka sacda monte edilmiş 2 adet LED geri vites lambası. * Kaz boynunun altında 2 çift, arkada 2 çift Ferry halkası. * Geri vites yaparken akustik uyarı sinyali. * HRM metalizasyon (Yüksek Dirençli Metalizasyon).

Durum: iyi (kullanılmış), dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 12.500 kg, izin verilen dingil yükü (dingil 2): 12.500 kg, izin verilen aks yükü (aks 3): 12.500 kg, ilk tescil: 11/2002, yükleme alanı uzunluğu: 18.600 mm, yükleme alanı genişliği: 2.530 mm, yükleme alanı yüksekliği: 870 mm, toplam uzunluk: 126.000 mm, toplam genişlik: 2.530 mm, toplam yükseklik: 870 mm, süspansiyon: hava, lastik boyutu: 235/70 R17.5, lastik durumu: 65 yüzde, renk: diğer, Üretim yılı: 2002, Donanım: ABS, = Diğer seçenekler ve donanımlar = - 3 aks - Hidrolik - Havalı süspansiyon - Yönlendirilebilir aks - Kampanalı frenler - Merkezi yağlama = Diğer bilgiler = Aks konfigürasyonu Lastik ölçüsü: 235/70 R17.5 Aks markası: BPW Frenler: Kampanalı frenler Arka aks 1: Çift tekerlekli; Maks. aks yükü: 12.500 kg; Yönlendirilebilir; Lastik dişi: %65 Arka aks 2: Çift tekerlekli; Maks. aks yükü: 12.500 kg; Yönlendirilebilir Arka aks 3: Çift tekerlekli; Maks. aks yükü: 12.500 kg; Yönlendirilebilir; Lastik dişi: %65 Ağırlıklar Boş ağırlık: 10.920 kg Yük kapasitesi: 49.080 kg Azami toplam ağırlık: 60.000 kg Hfedpfx Apjzf U Svj Iei Fonksiyonel Yükleme platformu yüksekliği: 87 cm Durum Teknik durumu: iyi Görsel durumu: iyi Kimlik Plaka: QAMD512

Durum: mükemmel (kullanılmış), dingil konfigürasyonu: 2 dingil, izin verilen dingil yükü (dingil 1): 10.500 kg, izin verilen dingil yükü (dingil 2): 10.500 kg, ilk tescil: 06/2017, toplam uzunluk: 7.000 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 880 mm, süspansiyon: hava, lastik boyutu: 235/70 R17.5, lastik durumu: 75 yüzde, renk: diğer, Üretim yılı: 2017, Donanım: ABS, = Diğer seçenekler ve aksesuarlar = - 2 aks - Havalı süspansiyon = Diğer bilgiler = Lastik ölçüsü: 235/70 R17.5 Lastik profili: %75 Frenler: kampanalı frenler Hfodpfxjzc Ucdj Ap Iei Arka aks 1: çift tekerlekli; Maksimum aks yükü: 10.500 kg Arka aks 2: çift tekerlekli; Maksimum aks yükü: 10.500 kg Azami toplam ağırlık: 21.000 kg Teknik durumu: çok iyi Görsel durumu: çok iyi Plaka: QALO590

Durum: yeni, azami yük ağırlığı: 98.290 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: 3 aks, Donanım: ABS, You can find our complete vehicle inventory with immediately and soon-available vehicles on our website. Excerpt from the equipment list. Complete equipment details available upon request. Gooseneck: * MAX810-Neck-V-30-2.70-2{DSR 2 700/ASH 1300->1400} * Hydraulic gooseneck, lift/lower and detachable. Length approx. 3,650 mm * Truck hydraulic connection with flow regulator (20 l/min), * incl. hanging bracket for the supply lines; tractor unit tank must hold at least 80 l, equipped with MAX Trailer couplings; otherwise, couplings to be supplied free issue by the customer. Hfjdpfxjzbfuhs Ap Ioi * For tractor unit: 6 x 4 or 8 x 4 Loading Platform MAX810-6-A-11.00-17.5-1.50-2.75-PA-X * 6-axle extendable loading platform with pin-eye coupling at the front and rear chamfer of approx. 500 mm x 8°. * Length: approx. 11,000 mm * Technically extendable by: approx. 7,700 mm * Axle spacing: approx. 1,500 mm * Hydraulic coupling pin. PENDLE AXLE 2-AXLE FRONT CHASSIS PENDLE-AXLE * All axles hydro-mechanically forced steered. * MAX810-chassis-PA-X-F-2-17.5-1.50-2.75 pin-eye coupling front and rear. * Length: approx. 2,970 mm Chassis width: approx. 2,750 mm * BEKA-MAX centralized lubrication for 2-axle chassis with standard grease NLGI-2 * Extendable widenings of approx. 230 mm per side for a 2-axle chassis. (± 27 kg) PENDLE AXLE 6-AXLE LOADING PLATFORM PENDLE-AXLE * All axles hydro-mechanically forced steered. * Hose rupture valve on axle equalizing cylinder with automatic RESET function. * Hydraulic cylinders with shut-off valves and pre-insert to secure in raised position. * Technical axle load: each 13,740 kg (30 km/h) * Hydraulic axle equalization. TYRES * 24 x brand at our discretion (M+S) 245/70 R17.5 * Load index 143/141L (146/146F) * TPMS: TPMS tyre pressure monitoring system according to ECE R 141. Final coating of axles * Painted in DB7350 Novagrau, solid color, with 2 layers of 2-component paint. * PAINTWORK Complete steel construction sandblasted automatically by shot blast machine after welding. * Second blasting with corundum for optimal adhesion of the coating system. * HRM metallizing of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to guarantee optimal corrosion protection. * PAINTWORK Trailer in carmine red (RAL 3002) Including the following accessories * Bracket with winch for spare wheel at the front of the gooseneck. * 3.5-inch kingpin * Steel front wall approx. 400 mm high. * Plug-in aluminium drop sides and rear wall, approx. 400 mm high, anodized finish, for gooseneck. * Operating lever on the gooseneck protected by a foldable cover. * Illuminated operating controls on the gooseneck with on/off switch. * One 7-pole socket left and right rear of the gooseneck for warning board. * Load gauge on the gooseneck to determine axle load at front and rear chassis * BEKA-MAX centralized lubrication for gooseneck with standard grease NLGI-2. * Hydraulic connections from gooseneck to lowbed with threaded couplings. * Access possibility to the gooseneck. * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 HP) at 3000 rpm Emission stage: EU Stage V Max. hydraulic pressure: 280 bar Max. flow: 21 l/min Assembly on the gooseneck. * Hydraulic oil tank 100 L frame hot-dip galvanized (± 480 kg) * Hydraulic connection lines between power pack and connector plate on the gooseneck. * Radio remote control: * Control of power pack, start/sto

Durum: yeni, azami yük ağırlığı: 38.400 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle stock with immediately and short-term available vehicles on our website. Excerpt of the equipment. Complete equipment list available upon request. Loading platform: * Extendable loading platform with pneumatically operated locking mechanism * Loading platform with approx. 30 mm thick wooden planks * 7 pairs of folding lashing rings to the outside (LC 5,000 daN) * 3 pairs of folding lashing rings to the outside (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * Tyres 385/65 R 22.5, brand of our choice * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the tractor unit takes place via the standardized EBS interface according to ISO 11992. The tractor unit must be capable of receiving and displaying this data for accurate monitoring. Axle: * BPW axles and suspension * All axles hydro-mechanically forced-steered * Disc brakes * Technical axle load: 10,000 kg each (ET 0) * Air suspension with lifting and lowering valve * Axle tools Brake system: Hfjdpjw Tpr Iefx Ap Iji * WABCO braking system according to EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations * 24 Volt LED lighting ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection rail with sockets 24N, 24S & 15-pin. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Painting: * Complete steel construction automatically blast-cleaned by shot blasting machine after welding * Second blasting with corundum for optimal coating adhesion * Final coating with 2 layers of 2K top coat, single-colour in RAL 3002 Carmine Red according to RAL System 841GL * Rims in silver grey * Rear section metallized and painted in RAL 9010 (Pure White) * Metallic paint not possible * Coating structure tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Accessories: * Remote steering from the front and rear via cable remote control with push buttons, with axle tracking control (installation in the tractor unit not included) * Electro-hydraulic unit * 4 wheel chocks with holders at the front wall * 2 inch king pin * At the galvanized connection rail in front, yellow-red air couplings * Mountings for warning boards left and right on neck and rear, including socket * 10 pairs of stanchion pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the platform * One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container locks in the loading area, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container; an additional locking point provided in the extension for a 45' container * 4 pairs of transverse stanchion pockets mounted across the platform for plug-in stakes approx. 100 x 50 mm * Storage for up to 9 pairs of plug-in stakes bolted to the front wall on the inside * Climbing ladder mounted left and right in the direction of travel * One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted at the front under the loading platform on the l

Durum: ikinci el, boş ağırlık: 14.995 kg, azami yük ağırlığı: 50.805 kg, toplam ağırlık: 65.800 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 10/2023, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, süspansiyon: hava, lastik boyutu: 235/75 R17.5, renk: gri, Üretim yılı: 2023, işletme ağırlığı: 14.995 kg, Donanım: ABS, With every used semi-trailer, you receive a current and comprehensive inspection and functional report. Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Loading Platform: - Extendable loading platform with rear bevel approx. 500 mm x 8° - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 4 pairs of outward-folding lashing rings (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the loading platform (LC 10,000 daN) - 1 intermediate table 250 mm - Cut-outs in the outer frame of the loading platform for fastening straps (LC 2,000 daN) - Approx. 48 mm hardwood flooring, checker plate over the axles Axles and Tyres: - BPW axles, hydro-mechanical forced steering - Technical axle load: 12,000 kg - Air suspension with lifting/lowering valve - Axle tool kit - Tyres: 235/75 R17.5 Braking System: - Braking system compliant with EU regulations, EBS-E (4S3M) Included Accessories: - 2" king pin - Galvanized steel front wall approx. 400 mm high - Yellow-red air couplings on the galvanized front connection panel - 4 wheel chocks with holders on the front wall - Spare wheel with holder in front of the front wall - Electro-hydraulic unit - Remote steering from front and rear via wired remote control, with push buttons and single-track axle monitoring - Recess at rear of gooseneck to accommodate ALU loading ramps - Galvanized, extendable widening by approx. 230 mm per side - European reflector panels (red-yellow) at the rear of the trailer - White reflective stripe compliant with EU regulations on the sides, on the extension, with red reflective stripe at the rear - Holders for warning signs on both the gooseneck and rear plate, including sockets left and right - Galvanized folding supports under the rear bevel of the loading platform - Mounting bracket for a beacon at the rear of the trailer - Central lubrication system with 2 BEKAMAX (Pico) pumps, standard grease NLGI-2, removable pump guard Hedpfjv Hr Axox Ap Ijfi - Mud flap at the rear of the trailer - Manual and documentation - On the gooseneck: Removable ALU side walls and rear wall approx. 2,440 x 400 mm - Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) - 4 pairs of WADER container locks in the loading platform for one 20ft, two 20ft, 40ft, or one 45ft container - 8 pairs of stake pockets for 100 x 50 mm plug-in stakes in the external frame of the loading platform - Adjustable plug-in rails for ALU loading ramps at the rear of the vehicle - Lift axle on the front axle with control via TEBS E according to current axle load and loading condition - Four approximately 400 mm extendable warning signs, approx. 423 x 423 mm, each with a position light - Beacon bracket on the warning signs - Wireless remote control for rear steering in addition to cable remote, with indicator lights on receiver for single-track monitoring - Painted sand layer on checker plate above king pin and loading platform for slip resistance - 80 km/h speed sticker at the rear - Load gauge for determining axle loads including load chart

Durum: yeni, azami yük ağırlığı: 30.190 kg, toplam ağırlık: 43.000 kg, dingil konfigürasyonu: 2 dingil, Donanım: ABS, You can find our full range of vehicles, including immediately and short-term available units, on our website. Excerpt from the Equipment List. Complete equipment details available upon request. Loading Platform: - Low bed with external beams, designed as extendable SUPER LOW version, approx. 6,850 mm in length - Low bed with fixed hardwood floor, approx. 40 mm thick, and mechanical locking - Service lines routed securely inside the extendable beams, automatically adjusting to the respective bed length - 5 pairs of lashing rings, foldable to the outside (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for mounting bolted RUD rings Gooseneck: - Gooseneck in SNT design for optimized loading length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth wheel load: 23,000 kg - For tractor units: 4x2, 6x2 Rear Chassis: - Rear chassis in short version with closed outer frame and checker plate cover - Chassis with excavator recess, closed in the rear half to accommodate air tanks - 2 pairs of lashing rings, foldable to the outside (LC 5,000 daN) - 1 pair of lashing rings, foldable to the outside (LC 10,000 daN) - 1 pair of lashing rings, horizontal, mounted at the front & rear of the chassis (LC 10,000 daN) Axles: - BPW axles with hydro-mechanical forced steering - Technical axle load: 12,000 kg each - Air suspension with lift and lower valve Tyres: - 245/70 R 17.5 3PMSF tyres - Manufacturer of our choice - Load index (146/146F) - TPMS tyre pressure monitoring system per ECE R 141 - Data transfer to the tractor via standardized EBS interface (ISO 11992) - The tractor must be capable of transmitting and displaying these data for correct indication Brake System: - Brake system compliant with EU regulations, with EBS-E (2S2M) Electrical System: - Electrical system compliant with EU regulations, 24-volt lighting ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the turn signal - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S, and 15-pin sockets according to ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Steel Structure: - Made from high-strength fine-grained steels - Steel grades: S355J2+N / S355MC (yield strength 355 MPa), S690QL / S700MC (yield strength 690 MPa) Coating: - Complete steel frame automatically shot-blasted after welding - Second blasting treatment with corundum for optimal coating adhesion - HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for superior corrosion protection - Final topcoat: 2 layers of 2K paint, single color, RAL 3002 carmine red, in accordance with RAL system 841GL - Rims in silver - Rear section metallized and painted in RAL 9010 (pure white) - Metallic paint not available - Paint build-up tested in salt spray fog test according to ISO 9227-NSS - Cavity sealing with special wax Including the following additional equipment: - 2-inch king pin Hodpfxsxarl Ns Ap Ijfi - One galvanized steel front wall, approx. 400 mm high - Remote steering from front and rear, cable remote controlled via push buttons, with single-track steering alignment (installation in the tractor unit not included) - Hydraulic connections from gooseneck to low bed with multi-coupling instead of screw couplings - Electro-hydraulic power unit - Preparation for mounting of bolt-on container positions for 1x 20' or 1x 40' container on the external beams - Without container locks

Durum: yeni, boş ağırlık: 9.600 kg, azami yük ağırlığı: 53.400 kg, toplam ağırlık: 63.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 12.400 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 1.340 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5, renk: gri, Donanım: ABS, Cargo area: - Cargo area with approx. 30 mm thick hardwood floor - 10 pairs of outward-folding lashing rings Hsdpfx Ajrq Dlfsp Iofi Landing legs: - JOST landing gear with 2-speed gearbox for 24 t lifting capacity Axles and tyres: - BPW axles, technical capacity 10,000 kg, first axle fixed, all other axles hydraulically/mechanically forced-steered, mounted on a turntable - Air suspension with raise/lower valve - Axle tools - Tyres: 385/65 R22.5 Braking system: - WABCO braking system according to EU regulations with EBS-E (4S3M) Steel construction: - Steel construction made of high-strength fine grain steels - Steel grades: - S355J2+N / S355MC - S690QL / S700MC Electrics: - Electrical system according to EU regulations, 24-volt lighting - ASPÖCK-UNIBOX at the front connection strip, with 24N, 24S & 15-pin sockets - Connection according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Painting: - First-class, durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component zinc dust primer - High-quality single-colour 2-component top coat in Nova grey - Rear section metallized and painted in RAL 9010 Accessories included: - Cargo area with approx. 30 mm thick hardwood floor - 2" king pin - Galvanized steel front wall approx. 1,200 mm high, EN12642-XL - Yellow-red air couplings at the galvanized front connection strip - 4 wheel chocks with holder at the front wall - Holder for 1,000 mm posts in the rear central beam - At the gooseneck and the rear plate, holders for warning panels including socket, left and right - Remote steering from front and rear by cable remote control with push buttons, including single tracking control for the axles - Electro-hydraulic power unit - White reflective tape according to EU regulations on the sides of the trailer, red at the rear - 12 pairs of posts pockets for 100 x 50 mm plug-in stakes in the side frame of the cargo area - European reflector plates at the rear of the trailer - A holder for a revolving beacon at the rear of the trailer - A mudflap at the rear of the trailer - Manual and description on USB stick - BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable protection around the pump - TPMS tyre pressure monitoring system: - The tractor unit must be capable of receiving and displaying this data in order for correct indication - Lift axle on the front axle controlled via TEBS E depending on current axle load and load condition - Radio remote control for remote steering in addition to cable remote, with indicator lights on the receiver for single tracking control - 5 pairs of crosswise stake pocket strips mounted in the cargo area for 100 x 50 mm plug-in stakes - 80 km/h speed stickers at rear and both sides - Adjustable access ladders mounted on the left and right sides in the direction of travel - 2 reversing lights mounted on the rear plate - Load gauge for axle loads including load diagram - HRM metallization of the side frame: complete steel frame shot-blasted, then the defined visible areas metallized with ZINACOR 850 (85% zinc – 15% aluminium) hot finished

Durum: yeni, boş ağırlık: 15.420 kg, azami yük ağırlığı: 61.080 kg, toplam ağırlık: 76.500 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, lastik boyutu: 235/75/r17,5, renk: gri, Donanım: ABS, Gooseneck: Gooseneck with rear bevel approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Load area: Extendable load area with rear bevel approx. 500 mm x 8° 8 pairs of outward folding lashing rings 1 pair of flat-fitted lashing rings at the front of the load area Recesses in the outer frame of the loading area for attaching tie-down straps Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Two-piece steel ramps: One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramp sections hydraulically lift and fold, hydraulically height-adjustable, and hydraulically shiftable. Maximum load per pair: 50,000 kg. Landing legs: • JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and tires: BPW axles and suspension, 4th and 5th axles steering Technical axle load: 12,000 kg 4th and 5th axles with electro-magnetic reverse lockout, activated via reverse gear and manually Tires 235/75 R 17.5 3PMSF Braking system: Braking system according to EU regulations with EBS-E (4S3M) Sockets and lighting: Electrical system in accordance with EU regulations, lighting 24 volts ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connector rail with sockets 24N, 24S & 15 pin Connection compliant with ISO: 24N ISO-1185 24S ISO-3731 15 pin ISO-12098 Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer High-quality 2-component (2K) topcoat, single color MB 7350 Novagrau Rear part metalized and painted in RAL 9010 (pure white) No metallic paint possible Steel construction: Steel construction made of high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Accessories: One spare wheel with holder in front of bulkhead 2" kingpin One galvanized steel front wall, approx. 400 mm high Yellow-red air couplings mounted on the galvanized connector rail at the front 2 wheel chocks with holder on the front wall Bracket at rear of gooseneck for ALU drive-on ramps One holder for a rotating beacon at the rear of the trailer Galvanized supports beneath the rear bevel of the loading area Hodpol Sl Izjfx Ap Iofi White reflector tape according to EU regulations on the sides, extension, and rear in red Electro-hydraulic unit at rear under the loading area Mounts for warning signs with socket at the gooseneck and rear plate left and right Ramp control valves fitted to right-hand side of the trailer One mud flap at the rear of the trailer Manual and documentation on USB stick 3.5" kingpin supplied loose Plug-in ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm (LxH) Rear galvanized drop-in stakes are removable (structure length approx. 2,560 mm) 3 pairs of WADER container pockets in the loading area for a 20' (30') or 40' container 6 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area Galvanized extensions, extendable by approx. 230 mm per side Lifting axle on the front axle with control via TEBS E, depending on the current axle load and current loading condition Square cleats 20 x 20 mm every 200 mm on the outer frame of the loading area's bevel On the checker plates, above the kingpin and the loa...

Durum: yeni, boş ağırlık: 13.250 kg, azami yük ağırlığı: 47.550 kg, toplam ağırlık: 60.800 kg, dingil konfigürasyonu: 3 aks, süspansiyon: hava, lastik boyutu: 245/70 r17.5, renk: gri, Donanım: ABS, Gooseneck: Gooseneck with rear taper approx. 750 mm x 10°. Hedpfol Uxdkjx Ap Iefi 3 pairs of lashing rings 30 mm thick hardwood flooring Extendable loading platform: Extendable loading platform with rear taper approx. 1,000 mm x 8° 5 pairs of outward-folding lashing rings 3 pairs of outward-folding lashing rings 1 pair of horizontal lashing rings at the front of the loading platform Cutouts in the outer frame of the platform for attaching tension straps Approx. 48 mm thick hardwood flooring, checker plate over the axles Two-piece steel ramps: One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood decking. Ramp with hydraulically folding ramp sections, hydraulic lift mechanism, and hydraulically adjustable. Maximum load per pair: 40,000 kg Landing legs: JOST landing legs (mechanical) with two-speed gearbox for 24 t lifting capacity (50 t test load) Axles and tires: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced-steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool Tires 245/70 R 17.5 Brake system: Braking system according to EU regulations with EBS-E (4S3M) without connection lines to the tractor unit Steel structure: Steel structure made of high-strength fine-grain steels Steel qualities: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a two-component (2K) zinc dust primer High-quality two-component (2K) topcoat in single-tone Nova Grey Rear section metallized and painted in RAL 9010 (pure white) No metallic paint possible Electrical system: Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: 2" king pin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings at the galvanized front connection bar 4 wheel chocks with holder at the front wall One spare wheel with holder in front of the front wall Electro-hydraulic unit Remote steering front and rear via cable remote control with push buttons and single-track axle alignment control Mount for ALU loading ramps at rear section of the gooseneck European reflector boards (red-yellow) at the rear of the trailer White reflector tape as per EU regulations on the side, extension and rear Red at the rear At the gooseneck and ramps, one holder left and right for warning signs including socket Beacon holder at the rear of the trailer Galvanized folding support legs under the rear ramp of the loading area Control valves for ramps located on the right side of the trailer Cover plates to bridge the gap between ramp and loading platform One mud flap at the rear of the trailer Manual and description on USB stick BEKAMAX (Pico) central lubrication system with standard NLGI-2 grease and removable protection for the pump Plug-in ALU side and rear walls on the gooseneck approx. 2,440 x 400 mm Rear galvanized plug-in posts are removable, superstructure length approx. 2,560 mm One INOX toolbox 1,350x400x400 on the gooseneck, box covers oil fill plug 4 pairs of WADER container locks in the loading area for a

Durum: yeni, azami yük ağırlığı: 49.000 kg, toplam ağırlık: 60.800 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 r 17.5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with front corners beveled at 45° and rear taper approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable Loading Platform: - Loading platform in extendable design with rear taper approx. 1,000 mm x 8° - 5 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) - c. 48 mm thick hardwood flooring, over the axles with checker plate covering Detachable Two-Part Ramps: - One pair of galvanized, two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding ramp sections, hydraulic lifting unit and hydraulically adjustable - Maximum load per pair: 40,000 kg Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Hjdpjh Etf Rsfx Ap Ijfi Axles and Tyres: - BPW axles, two rigid axles, two steering trailing axles, air suspension, with drum brakes, with raise/lower function - The trailing steering axles can be locked electromagnetically via reverse gear or manually - Axle tools - Tyres: 235/75 R 17.5 Brake System: - Brake system according to EU regulations with EBS-E (4S3M) Steel Construction: - Steel construction made of high-tensile fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Paintwork: - First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat finish in single-colour Novagrau Electrical System: - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front terminal strip with 24N, 24S & 15-pin sockets Accessories Included: - 2" king pin - One galvanized steel front wall approx. 400 mm high - One spare wheel with holder in front of the headboard - Yellow-red air couplings at the galvanized front terminal strip - 4 chocks with holder at the front wall - Mounting at the rear area of the gooseneck for ALU drive-on ramps - Galvanized folding supports under the taper of the loading platform - Bracket for a rotating beacon - Cover plates to bridge the gap between ramps and loading platform - White reflector tape to EU specification on the sides, red at rear and on extension - Electro-hydraulic power pack - On both sides of the gooseneck and ramps, mounting brackets for warning signs incl. socket outlet - Ramp control valves installed on the right trailer side - One mudguard at the rear of the trailer - Instruction manual and description on USB stick - ALU side walls and end wall, plug-in, on gooseneck approx. 2,440 x 400 mm - The rear galvanized plug-in posts are removable (length of structure approx. 2,560 mm) - 4 pairs of WADER container pockets in the loading platform for one 20ft, 2x 20ft or one 40ft container - 7 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the loading platform - Extensions, galvanized, extendable by approx. 230 mm per side - Lift axle on the front axle with control - Square climbing rails 20 x 20 mm - Central lubrication system BEKAMAX - F

Durum: yeni, boş ağırlık: 12.900 kg, azami yük ağırlığı: 34.100 kg, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.850 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 350 mm, süspansiyon: diğer, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 12.900 kg, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading area length, approx. 3,750 mm long - Gooseneck hydraulically height-adjustable and detachable - Technical fifth wheel load: 23,000 kg - Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading Platform: - Low bed with external beams in extendable "SUPER LOW" design, length approx. 6,850 mm - Low bed with fixed hardwood floor approx. 40 mm thick and mechanical locking Rear Chassis: - Rear chassis with closed outer frame, checker plate covering and continuous prismatic excavator trough approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings foldable outward - 1 pair of lashing rings lying in the trough - 2 pairs of stake pockets for plug-in stakes (100 x 50 mm) in the outer frame Pendulum Axle and Tires: - "PENDULUM AXLE", all axles hydromechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-insert to secure in lifted position - Final coating of axles with 2 layers of single-color 2K paint, painted in "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tires 245/70 R17.5 - TPMS (Tire Pressure Monitoring System) compliant with ECE R 141 Accessories: - Prepared for fitting of bolted container locking positions for 1x 20ft or 1x 40ft container on the external beams - 2" kingpin - Galvanized steel front wall approx. 400 mm high - One spare wheel - On the galvanized connection strip at the front: yellow-red air couplings - 4 wheel chocks - Remote steering front and rear operable via cable remote control with push buttons, including single-track monitoring of the axles - Hydraulic connections from gooseneck to low bed with multi-coupling instead of threaded couplings - Electro-hydraulic unit - White reflector tape on sides, extension and rear, according to EU regulations - European reflector panels (red-yellow) at the rear of the trailer - At the gooseneck and rear panel, left and right, each with a bracket for warning signs including socket - 6 pairs of threaded blocks between the lashing rings under the top chord on the outer beam for mounting of bolt-on RUD rings VLBG-4 - Removable ALU side walls and rear wall on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized plug-in posts are removable (body length approx. 2,560 mm) - Gooseneck at the upper rear area closed with a removable cover - 5 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading platform - Fold-out extensions, approx. 230 mm per side - 2 pairs of bolt-on RUD rings VLBG-4 M24 (LC 8,000 daN) - 1 pair of steel ramps for bridging the low bed’s mounting hooks - Sanded layer painted on the loading platform as an anti-slip coating - Speed stickers 80 km/h on rear and both sides - Rear chassis’ bucket recess at the rear closed with a plug-in plate - Four warning panels extendable by approx. 400 mm, size approx. 423 x 423 mm - Radio remote control for the rear steering, in addition to the cable remote control, with indicator lights on the receiver as single-track monitoring - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard grease NLGI-2 - Load gauge for determining axle loads Hfsdpfxehlz R Ss Ap Isi - HRM (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, then all defined visible surfaces hot-finished in metallization with ZINACOR 850 (Zinc 85% - Alu 15%)

Durum: yeni, azami yük ağırlığı: 38.100 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 13.100 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 760 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5 3PMSF, renk: gri, Donanım: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Platform: 5 pairs of fold-out lashing rings on the outside 3 pairs of fold-out lashing rings on the outside 1 pair of horizontal lashing rings at the front end of the platform Cut-outs in the outer frame of the loading platform for attaching tension straps Approx. 48 mm thick hardwood flooring, checker plate flooring above the axles Landing Gears: JOST landing legs with 2-speed gearbox, lifting capacity 24 t Axles and Tyres: BPW axles, two fixed axles, two steered trailing axles, air suspension, drum brakes, raise/lower function Trailing steering axles with electro-magnetic reverse lock, activated via reverse gear or manually Axle tool Tyres 205/65 R17.5 3PMSF Brake System: WABCO brake system according to EU regulations, with EBS-E Steel Construction: High-strength fine-grained steel construction Steel Grades: S355J2+N/S355MC Hfodpfxjtphtmo Ap Iei S690QL/S700MC Electrical Equipment: Electrical system according to EU regulations, lighting: 24 Volt ASPÖCK-NORDIK ASPÖCK-UNIBOX at the front connection panel, with 24N, 24S & 15 pin sockets Connections according to ISO Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by 2-component zinc-dust primer Premium 2-component topcoat, single colour in MB 7350 Novagrau No metallic finish possible Rear section metallized and painted RAL 9010 Accessories Included: 1 spare wheel 205/65 R 17.5 TPMS tyre pressure monitoring system according to ECE R 141 Galvanized front connection bar with yellow-red air couplings 4 chocks with holder at the front wall Mounting at rear of gooseneck for ALU loading ramps Galvanized folding supports under the loading platform’s rear chamfer Holder for a warning beacon at the rear of the trailer Height-adjustable tarpaulin superstructure Galvanized front wall with tensioning mechanism for sliding curtains Height-adjustable by approx. 400 mm Roof brand "EDSCHA" sliding forward on ALU roof support profiles, screwed front and rear walls On platform: 3 pairs of adjustable stanchions Rear of superstructure can be hydraulically widened left and right by approx. 750 mm Sliding roof with upward swinging portal beam Sliding tarpaulin with 700 mm length reserve, securing straps at approx. 600 mm intervals Height upper edge of superstructure approx. 3,960 mm Driving with open sliding roof is not permitted and will damage the tarpaulin Suspension rail for ALU loading ramps at the rear of the vehicle At the gooseneck and at the left and right rear panel: each with a bracket for warning boards including socket Mudflap at the rear of the trailer European reflector boards at the rear of the trailer 7 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform Lift axle on the front axle with TEBS E control, depending on current axle load and loading status Rear of superstructure with closed ALU wing doors Anti-slip sand finish painted on checker plates on gooseneck and platform Central lubrication system BEKAMAX, standard grease NLGI-2, removable protective cover for pump 80 km/h speed sticker at rear and on both sides Load gauge for axle load determination including load chart

Durum: yeni, boş ağırlık: 10.600 kg, azami yük ağırlığı: 39.400 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 760 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5, renk: gri, işletme ağırlığı: 10.600 kg, Donanım: ABS, Swan-neck: - Swan-neck with 30 mm thick hardwood flooring - Swan-neck at the rear in straight design - 3 pairs of lashing rings (LC 5,000 daN) Extendable loading platform: - Loading platform in extendable version - 5 pairs of fold-out lashing rings - 3 pairs of fold-out lashing rings - 1 pair of horizontal lashing rings at the front of the loading platform - Cut-outs in the outer frame of the loading platform for attaching tension belts - Hardwood flooring approx. 48 mm thick, checker plate covering above the axles Landing legs: - JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and tyres: - BPW axles, two fixed and two steering axles - Air suspension, drum brakes, with lift/lower function - The steering axles can be locked electro-magnetically via reverse gear or manually - Axle tools - Tyres: 205/65 R17.5 Brake system: - Brake system according to EU regulations with EBS-E (4S3M) Steel construction: - Steel structure made of high-strength fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations, 24 volt lighting, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection strip, with 24N, 24S & 15-pin sockets - Connections according to ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Paintwork: - First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat, single colour in Nova grey - Rear section metallized and painted in RAL 9010 (pure white) Included accessories: Hedpfx Apot Ag Uws Iofi - One spare wheel with holder located in front of the bulkhead - 2" king pin - Galvanized steel front wall approx. 400 mm high - Yellow-red air couplings on the front galvanized connection strip - 4 wheel chocks with holder at the bulkhead - Galvanized folding supports under the sloped part of the loading platform - Holder for rotating beacon at the rear of the trailer - Galvanized, extendable width extensions approx. 230 mm per side - White reflective tape according to EU regulations on sides, at extension section, and red at rear - On swan-neck and rear panel: one mount each for warning panels including socket (left and right) - European reflective warning boards (red-yellow) at the rear of the trailer - TPMS tyre pressure monitoring system in accordance with ECE R 141 - On the swan-neck: removable ALU side panels and tailboard approx. 2,440 x 400 mm - The rear, galvanized stanchions are removable (length of superstructure approx. 2,560 mm) - 7 pairs of WADER container locks - 1x 20ft container on the loading platform; 1x 40ft container on the loading platform; 1x 40ft container over the swan-neck; 2x 20ft containers - 7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the loading platform - Lift axle at the front axle, controlled by TEBS E in relation to current axle load and loading status - Sliding hook-in rail for ALU loading ramps at the rear of the vehicle - Sanded, anti-slip coating painted onto checker plate on swan-neck and loading platform - Four warning panels extendable by approx. 400 mm each, approx. 423 x 423 mm, with a position lamp - Mount for rotating beacon on warning panels - Speed stickers 80 km/h at the rear and on both sides - Load gauge to determine axle loads, including load chart

Durum: yeni, toplam ağırlık: 58.000 kg, Üretim yılı: 2026, Low-bed semi-trailer MAX100 4 A 8.60 U Technical Data Speed: 80 km/h Gross Vehicle Weight: 60,800 kg Fifth Wheel Load: 18,000 kg Axle Load: 42,800 kg Tare Weight: Payload: Gooseneck Length: 3,850 mm Loaded Fifth Wheel Height: 1,250 mm Loading Platform Length: 8,600 mm Extendable by: 5,400 mm Axle Spacing: 1,360 mm Steering Radius (rear): 2,300 mm Loading Height at Max. Load: 860 mm Hedpfxjg Sk T Do Ap Iefi Overall Width: 2,540 mm Suspension Stroke: -55/+145 mm Technical Description Gooseneck With 45° chamfered front corners and rear chamfer approx. 760 mm x 10° 3 pairs of lashing rings (LC 5,000 daN) 30 mm thick hardwood floor Extendable loading platform With rear bevel approx. 1,000 mm x 8° 5 pairs of outward-folding lashing rings (LC 5,000 daN) 3 pairs of outward-folding lashing rings (LC 10,000 daN) 1 pair of flush-mounted lashing rings at the front of the loading platform (LC 10,000) Approx. 48 mm thick hardwood flooring, chequer plate above the axles Ramps Two-part steel ramps One pair of galvanized, two-part steel ramps, approx. 2,750 + 1,400 mm x 800 mm with approx. 48 mm hardwood flooring Ramp sections hydraulically lifted and folded in, hydraulic lift and hydraulically adjustable position Max. load per pair: 40,000 kg Tyres 235/75 R 17.5 Brake System compliant with EU regulations, with EBS-E (4S3M) Without connection lines to the tractor unit Paintwork First-class, long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by 2-component zinc dust primer High-quality 2-component (2K) top coat, single colour, in RAL shades of choice Rear section metallized and painted in RAL 9010 (Pure White) Landing Legs: JOST mechanical landing legs with 2-speed gearbox for 24t Lifting capacity (50t test load) Steel construction made from high-strength fine-grained steels. Steel Qualities: Steel construction made from high-strength fine-grained steel S355J2+N/S355MC (Yield Strength 355MPa) S690QL/S700MC (Yield Strength 690MPa) Electrical System according to EU regulations, lighting: LED 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets Connection as per ISO. 24N IS0-1185 24S IS0-3731 15-pin IS0-12098 Accessories included: One galvanized steel headboard approx. 400 mm high 2" king pin 4 wheel chocks with holders on the headboard One holder for revolving beacon at rear of trailer SAF axles, two rigid axles, one self-steering axle, air suspension, with drum brakes, with raise/lower function The self-steering axle with electromagnetic reverse lock, can be activated by reverse gear or manually Axle tools included Support for ALU approach ramps at the rear of the gooseneck Galvanized folding supports under the loading platform chamfer Mechanical safety lock for the loading platform extension One spare wheel with holder in front of the headboard Yellow reflective tape as per EU regulations on sides, extension, and rear of trailer At the front galvanized connector strip, yellow-red air couplings On gooseneck and rear apron left and right, mounts for warning plates, including sockets A mudflap at the rear of the trailer Manual and description On the gooseneck: Plug-in aluminium sideboards and rear wall, approx. 2,440 x 400 mm (LxH) Rear galvanized stanchions are removable Body length approx. 2,560 mm, +/- 46 kg 3 pairs of WADER container locks in the loading platform for a 20', 30', or 40' container (±30 kg) 6 pairs of pockets for plug-in stanchions

Durum: yeni, azami yük ağırlığı: 36.020 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including immediately and soon-to-be available models, on our website. Excerpt from the equipment. Full specification available upon request. Gooseneck: * Gooseneck with rear bevel, approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Load area: * Load area with rear bevel, approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the load area (LC 10,000 daN) * Hardwood flooring, approx. 48 mm thick; over the axles, chequer plate covering Two-part steel ramps: * 1 pair of galvanized, two-part steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating (C40/5). Point load approx. 2.8 t on a 20 x 20 cm area * Ramps with hydraulically foldable sections and hydraulic lifting device * Maximum load per pair: 30,000 kg Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Hsdpfjy Auhusx Ap Iofi Axles: * BPW axles and suspension, 2 fixed axles, 1 trailing steer axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lift and lower valve Tyres: * Tyres: 235/75 R 17.5 3PMSF – make at our discretion TPMS: * Tyre Pressure Monitoring System (TPMS) according to ECE R 141 Braking system: * WABCO braking system compliant with EU regulations, with EBS-E (2S2M), without connection lines to the tractor unit Steel construction: * High-strength fine-grained steel construction * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Coating: * HRM metallization of the entire chassis using ZINACOR 850 (85% zinc / 15% aluminium) for optimal corrosion protection * Final coating with 2 layers of 2-component topcoat, single-colour, RAL 3002 carmine red, according to RAL System 841GL * Rear section metallized and painted in RAL 9010 (pure white) * Wheel rims in silver Incl. accessories: * One bracket each for warning signs (left/right) at gooseneck and rear, incl. socket * 1 spare wheel carrier under the load area on the right * 2-inch kingpin * One galvanized steel front wall * At the galvanized front connection rail: yellow-red air couplings * 4 wheel chocks with holders at the front wall * 3-tier wooden planks * Galvanized folding supports under the rear bevel * Holder for beacon at the rear of the trailer * Height-adjustable curtain structure – approx. 3,960 mm * Galvanized front wall with locking mechanism for sliding curtains, height adjustable by approx. 400 mm * EDSCHA brand roof, forward-slidable on aluminium roof profile (bolted to front and rear walls) * 3 pairs of movable stanchions in the load area * Body hydraulically expandable to left/right at rear by approx. 750 mm * Sliding roof with high-lift portal carrier * Sliding curtain with approx. 700 mm extra length, tensioning straps spaced approx. 600 mm apart. Height O

Durum: yeni, azami yük ağırlığı: 37.980 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full equipment details upon request. Gooseneck: * Gooseneck with front beveled corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Load platform in extendable design: * Extendable load platform with rear bevel approx. 1,000 mm x 8° * 6 pairs of folding lashing rings to the outside (LC 5,000 daN) * 3 pairs of folding lashing rings to the outside (LC 10,000 daN) * 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN) * Cutouts in the outer frame of the loading area for attaching tie-down straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * Tyres 235/75 R 17.5 3PMSF – make of our choice TPMS: * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the towing vehicle via the standardised EBS interface according to ISO 11992. For correct display, the towing vehicle must be capable of transmitting and displaying this data. Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock, can be activated via reverse gear and manually * Air suspension with raise/lower valve * Axle tool Brake system: * Brake system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel construction: * Steel construction of high-strength fine-grained steels * Steel grades: S355J2+N / S355MC (yield strength 355 MPa), S690QL / S700MC (yield strength 690 MPa) Painting: * Complete steel structure automatically blast-cleaned after welding with shot-blasting system * Secondary blasting with corundum for optimum coating adhesion * Final painting with 2 layers of 2K topcoat, single-colour in RAL 3002 carmine red, according to RAL system 841GL * Wheel rims in silver grey * Rear section metalized and painted in RAL 9010 (pure white) * Paint system tested in salt spray fog test according to ISO 9227-NSS * Cavity sealing with special wax Electrical system: * Electrical system according to EU regulations, lighting 24 volts ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO 1185 24S ISO 3731 15-pin ISO 12098 Accessories included: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * One spare wheel holder in front of the front wall * Yellow-red air couplings on the galvanized connection strip at the front * 4 wheel chocks with holder at the front wall * Provision at the rear of the gooseneck for ALU loading ramps * Galvanized folding supports under the rear bevel of the loading area * On the gooseneck and rear panel left and right, each with a holder for warning boards including socket Hfsdpfsy Aufmsx Ap Iei * Load manometer to determine axle loads including load diagram * On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable (superstructure length approx. 2,560 mm) * One galvanized toolbox integrated in the beveled gooseneck * 3 pairs WADER C

Durum: yeni, azami yük ağırlığı: 47.300 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.600 mm, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Hsdpfjyvnfgex Ap Iofi Extract from the equipment features. Full equipment details available on request. Gooseneck: * Gooseneck with beveled front corners (approx. 45°) and rear bevel of approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Extendable loading platform with rear bevel of approx. 1,000 mm x 8° * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of flat-mounted lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the platform for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate covering over the axles Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for 24t lift capacity (50t test load) Tyres: * Tyres 235/75 R 17.5 3PMSF, brand of our choice Axles: * BPW axles; two fixed, two self-steering, air suspension, with drum brakes and lift/lower function * The self-steering axles have an electro-magnetic reversing lock, activated via reverse gear or manually * Axle tools Brake System: * WABCO braking system according to EU regulations with EBS-E (4S3M), without connection lines to the tractor unit Steel Structure: * High-strength fine-grain steel construction * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical System: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connecting rail with 24N, 24S & 15-pin sockets according to ISO (24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098) Paintwork: * Premium, long-lasting corrosion protection for the shot-blasted welded frame, provided by a 2-component (2K) zinc-rich primer * High-quality 2-component (2K) top coat, single-color in RAL 3002 Carmine Red * Rear section metallized and painted RAL 9010 (Pure White) * Rims in silver Accessories: * Spare wheel holder in front of the front wall (without spare wheel) * 2" king pin * Galvanized steel front wall approx. 400 mm high * Yellow-red air couplings on the galvanized front connection rail * Recess at the rear of the gooseneck for ALU loading ramps * Galvanized folding supports under rear bevel of platform * Bracket for warning beacon at trailer rear * Brackets on both sides of gooseneck and rear for warning panels incl. socket * TPMS tyre pressure monitoring system according to ECE R 141 * Removable ALU side and rear boards on gooseneck, approx. 2,440 x 400 mm (L x H); galvanized rear posts removable (superstructure length approx. 2,560 mm) * Galvanized toolbox integrated in the beveled gooseneck * 3 pairs of WADER container pockets in the platform for one 20' (30') or one 40' container * Adjustable mounting rails for ALU loading ramps at the vehicle rear * 6 pairs of stake pockets for removable stakes approx. 100 x 50 mm in the outer frame of the platform * Galvanized outriggers extendable by approx. 230 mm per side * Lift axle on the front axle with TEBS E control depending on current axle load and load condition * 2 LED reversing lights mounted on rear panel * 2 pairs of ferry-

Durum: ikinci el, azami yük ağırlığı: 44.420 kg, toplam ağırlık: 53.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2025, bir sonraki muayene (TÜV): 04/2026, yükleme alanı uzunluğu: 11.500 mm, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our entire range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the specifications. Complete specifications available on request. Loading area: * Loading platform with approx. 30 mm thick hardwood floor * 9 pairs of lashing rings, foldable outwards (LC 10,000 daN) * 10 pairs of stanchion pockets in the outer frame of the loading area for plug-in stanchions approx. 100 x 50 mm Landing legs: * Hydraulic landing legs Tyres: * Tyres 385/65 R 22.5 - MICHELIN MULTI High Load 164K TPMS: * TPMS tyre pressure monitoring system in accordance with ECE R 141. Data transmission to the tractor unit takes place via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be able to transmit and display this data. Axles and suspension: * BPW axles, rated 10,000 kg each; first axle hydro-mechanically steered, second axle fixed, third axle hydro-mechanically steered, mounted on turntable * Air suspension with lift/lower valve Brake system: * WABCO brake system compliant with EU regulations with EBS-E (4S3M), without connection lines to the tractor unit Electrical system: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front terminal strip with 24N, 24S & 15-pin socket connectors according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: * High-strength fine-grained steel construction * Steel grades: S355J2+N/S355MC (Yield strength 355 MPa), S690QL/S700MC (Yield strength 690 MPa) Painting: * Complete steel structure automatically shot-blasted after welding using a shot blast machine * Second abrasive treatment with corundum for optimal coating adhesion * HRM metallizing of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure maximum corrosion protection * Final coating: 2 layers of 2K top coat, single color in RAL 9005 Jet Black according to the RAL 841GL system * Rear section metallized and painted in RAL 9010 Pure White * Rims painted silver-grey * Paint finish tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Accessories included: * Loading platform with approx. 30 mm thick hardwood floor * 2 inch kingpin * One galvanized steel headboard (EN12642-XL), approx. 1,200 mm high * At the galvanized front connection strip, DUOMATIK air couplings * Storage for approx. 1,000 mm plug-in stanchions in the central chassis at the rear * Mounts for warning boards, including sockets, left and right at gooseneck and rear panel * White reflective tape on the sides and red at the rear, according to EU regulations * 10 pairs of stanchion pockets for plug-in stanchions (ca. 100 x 50 mm) in the loading area outer frame Hsdoyu Eu Ispfx Ap Ijfi * European reflective signs (red-yellow) at the rear of the trailer * Mount for a flashing beacon at the rear of the trailer * One rear mud flap * Manual and documentation on USB stick * BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable protection for the pump * 4 wheel chocks with holder on the front wall * Rear axle steering front and rear, controllable via cable remote control with push buttons, including single-track monitoring (without installation in tractor unit) * Electro-hydraulic unit * 6 pairs of galvanized plug-in stanchions, approx. 100 x 50 mm, approx. 1,000 mm high * 5 pairs of stanchion pocket rails mounted crosswise in the loading area, for plug

Durum: yeni, boş ağırlık: 14.800 kg, azami yük ağırlığı: 61.700 kg, toplam ağırlık: 76.500 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, lastik boyutu: 235/75/r17,5, renk: gri, Donanım: ABS, Gooseneck: • Gooseneck with rear bevel approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Loading platform: • Extendable loading platform with rear bevel approx. 500 mm x 8° • 9 pairs of outwards folding lashing rings • 1 pair of flat lashing rings at the front of the loading platform • Cut-outs in the outer frame for attaching tension belts • Approx. 48 mm thick hardwood flooring, checker plate covering above axles Landing gear: • JOST mechanical landing legs with 2-speed gearbox, lifting capacity 24 t (test load 50 t) Axles and tyres: • BPW axles and suspension, 1st axle steering, 2nd and 3rd fixed, 4th and 5th trailing axles • Technical axle load: 12,000 kg • 1st, 4th and 5th axle with electro-magnetic reverse lock, activated via reverse gear and manually • Tyres 235/75 R 17.5 3PMSF Braking system: • WABCO brake system in accordance with EU regulations, incl. EBS-E (4S3M) Paintwork: • First class and long-lasting corrosion protection of the standard-shot-blasted welded frame, guaranteed by a 2-component zinc-rich primer • High-quality 2-component top coat, single colour MB 7350 Novagrau • Rear section metallised and painted RAL 9010 (pure white) Steel construction: • Fabricated from high-tensile fine-grained steels • Steel grades: • S355J2+N/S355MC (yield strength 355MPa) Hfsdpfx Apoma Hf Ro Iji • S690QL/S700MC (yield strength 690MPa) Equipment: • One spare wheel with holder in front of the bulkhead • 2" kingpin • Galvanised steel front bulkhead approx. 400 mm high • Yellow-red air couplings on galvanised connection strip at the front • 2 wheel chocks with holder mounted to the bulkhead • Provision at rear of gooseneck for ALU loading ramps • Galvanised extendable deck wideners, approx. 230 mm per side • Bracket for beacon at the rear of the trailer • Galvanised supports under the rear bevel of the loading platform • White reflective tape to EU regulations on sides, extension; red at the rear • Mounting hardware for warning signs with socket at gooseneck and rear, left and right • Detachable ALU side and rear boards on gooseneck, approx. 2,440 x 400 mm • Removable rear galvanised stanchions (body length approx. 2,560 mm) • 3 pairs of WADER container locks in platform for 20ft (30ft) or 40ft container • 7 pairs of stanchion pockets for 100 x 50 mm stanchions in outer frame • Lift axle on front axle with TEBS E control, responsive to axle load and load status • Adjustable mounting rails for ALU loading ramps at rear • 20 x 20 mm square climbing strips every 200 mm on outer frame of the platform bevel • BEKAMAX (Pico) central lubrication system with NLGI-2 grease, removable pump protection • 4 extendable warning signs approx. 423 x 423 mm with position light, extend by approx. 400 mm • Mounting for beacon on warning signs • European reflective plates (red-yellow) at rear of trailer • 80 km/h speed stickers on rear and both sides • Load gauge to determine axle loads including load diagram • HRM Metallisation (High Resistance Metallisation) of outer frame • Complete steel structure shot-blasted; all defined visible areas finished with ZINACOR 850 (85% zinc – 15% aluminium) hot metallisation

Durum: yeni, azami yük ağırlığı: 37.075 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment list. Full specifications available on request. Gooseneck: * Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approx. 30 mm thick Loading Platform: * Platform behind the gooseneck hydraulically liftable and lowerable, approx. 2,800 mm long, with rear chamfer approx. 1,000 mm x 8° * 6 pairs of fold-out lashing rings (LC 5,000 daN) * 2 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of fold-in lashing rings on the central beam at the front (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching tension belts (LC 2,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over axles with checker plate Two-piece Steel Ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding and unfolding ramp sections. Hydraulic lifting, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing Gear: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lift and lower valve Brake System: * WABCO braking system in accordance with EU regulations, with EBS-E (2S2M) Tires: * Tires 235/75 R 17.5 3PMSF – brand at our discretion Hfedpfx Ajyhkqzep Iji TPMS: * TPMS tire pressure monitoring system in accordance with ECE R 141 Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) ensuring optimal corrosion protection * Final paint with 2 layers of 2K top coat, single color in RAL 3002 carmine red, in accordance with RAL System 841GL * Wheels in silver-gray Accessories included: * 2-inch kingpin * Galvanized steel front wall approx. 400 mm high * Grating surface in the gooseneck chamfer C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating surface in the loading platform chamfer C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Painted sand layer as anti-slip on the checker plates above the kingpin and platform * Electro-hydraulic unit at rear beneath the loading platform * On the gooseneck: plug-in aluminum side boards and rear board, approx. 2,440 x 400 mm (L x H). The rear galvanized stakes are removable. (Body length approx. 2,560 mm) * Electric cable winch with radio remote control, lifting force approx. 5,400 kg, incl. approx. 9.5 mm thick wire cable, approx. 24 m long, with cable guiding roller * Bolted approx. 5 t ring for redirecting the winch cable on the gooseneck without guide pulley * One galvanized toolbox integrated in the chamfered gooseneck with an opening for a cable winch * Grating surface on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stakes, approx. 100 x 50 mm, in the outer frame of the loading platform * Lift axle on the front axle, controlled via TEBS E based on current axle load and loading status * 7 pairs inst...

Durum: yeni, azami yük ağırlığı: 25.645 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Excerpt from the equipment - full specification upon request. Loading area: - Low-bed with central beam, extendable version, length approx. 6,750 mm - 5 pairs of outward-folding lashing rings (LC 5,000 daN) - 1 pair of outward-folding lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at the rear of the platform (LC 10,000 daN) Gooseneck: - Gooseneck hydraulically raisable/lowerable and detachable Rear running gear: - Rear running gear, short design, with closed outer frame and tread plate cover - Running gear with excavator recess, rear half closed to accommodate air tanks - 2 pairs of outward-folding lashing rings (LC 5,000 daN) - 1 pair of outward-folding lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at the rear of the running gear (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced-steered - Air suspension with lift and lower valve Tyres: - Tyres 245/70 R 17.5 3PMSF - TPMS: Tyre Pressure Monitoring System according to ECE R 141 Braking system: - Wabco braking system according to EU regulations, with EBS-E (2S2M) Paintwork: - High-quality single-tone 2-component (2K) topcoat in RAL 3000 flame red Including the following additional equipment: - 2 king pins - Galvanized steel front wall, height approx. 400 mm - Remote steering override (front and rear) via cable remote control with pushbuttons, with axle tracking control (no installation in the tractor unit) - Electro-hydraulic power unit - Load manometer for axle load determination, incl. load diagram - On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in stanchions are removable (body length approx. 2,560 mm) - Separate air connection with air gun on the gooseneck - 2 work lights with switches on the trailer, mounted on the gooseneck platform left and right - 1 INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck - 6 pairs of stanchion pockets for plug-in stanchions, approx. 100 x 50 mm, in the outer frame of the loading area, 2 pairs in the outer frame of the running gear - Galvanized extensions, extendable by approx. 230 mm per side - Hydraulic lines from gooseneck to low-bed with multi-coupling instead of screw couplings (no guarantee on seals) Hsdpfoxf Siljx Ap Isfi - Central lubrication system with 2 BEKAMAX (Pico) pumps, standard grease NLGI-2, with removable pump cover - 2 pairs of WADER container pockets in the loading area, for 1 x 20' container - 1 removable galvanized intermediate platform with 1 pair of WADER container pockets - 1 pair of steel ramps to bridge the pick-up hooks of the low-bed - Sand coating on the loading area as slip protection - HRM metallization (High Resistance Metallization)

Durum: ikinci el, azami yük ağırlığı: 37.535 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2024, bir sonraki muayene (TÜV): 08/2026, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle stock, including vehicles available immediately or at short notice, on our website. Excerpt of equipment. Full equipment details available on request. Loading Platform: * Extendable loading platform with pneumatically operated lock * 7 pairs of folding lashing rings (LC 5,000 daN) * 3 pairs of folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching tensioning straps (LC 2,000 daN) Landing Legs: * JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lift capacity (approx. 50 t test load) Axles: * BPW axles, air-suspended, with disc brakes (approx. 430 mm), lift/lower function. Technical axle load: 10,000 kg per axle (ET0) * Trailing steering axle with electromagnetic reverse lock, activated via reverse gear or manually * Axle tools Tyres: * Tyres 385/65 R 22.5 Brake System: * Brake system in accordance with EU regulations with EBS-E (2S2M), without connection lines to the tractor unit Steel Structure: * Construction from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * First-class, durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) top coat in RAL 3002 Carmine Red * Rims in silver * Rear section metallised and painted in RAL 9010 (Pure White) Includes the following additional equipment: * Yellow-red air couplings at the galvanized front connection bar * 4 wheel chocks with holder * 2-inch king pin * Yellow reflective tape complying with EU regulations on the sides, extension, and rear of the trailer * European reflective panels (red-yellow) at the rear of the trailer * Loading platform with approx. 30 mm thick wooden floor, edged in Omega profiles Hjdpfx Aoxgk U Nsp Iofi * 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm, located in the outer frame of the platform * Storage for up to 9 pairs of plug-in stakes approx. 100 x 50 mm, bolted inside the front wall * 1 spare wheel carrier under the platform, left side in the direction of travel, without spare wheel * One mudflap at the rear of the trailer * Manual and description on USB stick * Mount for a rotating beacon at the rear of the trailer * At the gooseneck and on the rear panel left and right, each with a holder for warning signs including socket * 80 km/h speed sticker at the rear and on both sides * Load gauge for axle load determination, including load diagram * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container locks embedded in the platform for 1x 20' container, 2x 20' containers or 1x 40' container flush at the rear * INOX toolbox, approx. 600 x 350 x 600 mm, mounted under the platform, left side in direction of travel * 4 pairs of longitudinal stake pocket rails mounted on the loading platform, for plug-in stakes 80 x 50 mm * Lift axle on the front axle, controlled by TEBS E depending on current axle load and loading condition * 2 LED reversing lights mounted on the rear panel * HRM metallisation (High Resistance Metallisation)

Durum: yeni, azami yük ağırlığı: 38.140 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Partial equipment list. Full specifications available on request. Gooseneck: - Gooseneck with approx. 45° chamfered front corners and a rear bevel of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approx. 30 mm thick Loading area: - Telescopic loading area with rear bevel approx. 1,000 mm x 8° - Between the 1st and 2nd axle, one pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece removable, galvanized wheel recess covers (approx. 670 mm wide - max. point load 5 t each) - 1 pair of recessed lashing rings at the front of the loading deck (LC 10,000 daN) - 4 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - Cut-outs in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: Tyres 235/75 R17.5 3PMSF, brand at our discretion - TPMS tyre pressure monitoring system according to ECE R 141 - Data transmission to the truck via the standardised EBS interface per ISO 11992 - For correct display, the truck must be capable of transmitting and displaying this data. Axles: - BPW axles and suspension, 2 fixed axles, 3rd axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activatable via reverse gear and manually - Air suspension with lift and lower valve. Axle tools Brake system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Electrical system: - Electrical system in accordance with EU regulations - LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel structure: Steel frame made of high-strength fine-grain steels. - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Entire steel structure is automatically blasted after welding using a turbine blasting system - Second blasting with corundum for optimal coating adhesion - HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure top corrosion protection - Final painting with two coats of 2K paint, solid colour in RAL 3002 Carmine Red, rear section metallised and painted in RAL 9010 Pure White - No metallic paint possible - Paint finish tested in salt spray test per ISO 9227-NSS - Sealing of cavities with special wax Including the following accessories: - Mounts for warning signs on both sides at the gooseneck and at the rear, including socket - Spare wheel holder in front of the front wall (without spare wheel) - 2-inch kingpin - Galvanized steel front bulkhead, approx. 400 mm high Hfodpfew Tpq Dex Ap Iei - Yellow-red air couplings on the galvanized front connection panel - Galvanized folding supports under the loading area bevel - Hardwood impact protection on the rear wall from gooseneck to loading platform - 1 pair of recessed lashing rings along the central frame at the rear on the bevel (LC 10,000 daN) - Aluminium side walls and tailboard on the gooseneck