Kullanılmış Faymonville Stn-3U / Hydraulic Ramp / Lift Axle / Semi Trailer satın al (48.984)

Durumu: yeni, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2025, GVN Trailer 3-Assige Exklusieve Dieplader Neem contact met ons op voor meer informatie. Nedsqxbcnspfx Ag Necr

Durumu: kullanılmış, boş ağırlık: 14.995 kg, azami yük ağırlığı: 50.805 kg, toplam ağırlık: 65.800 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 10/2023, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, süspansiyon: hava, lastik boyutu: 235/75 R17.5, renk: gri, Üretim yılı: 2023, işletme ağırlığı: 14.995 kg, Donanım: ABS, With every used semi-trailer, you receive a current and comprehensive inspection and functional report. Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Loading Platform: - Extendable loading platform with rear bevel approx. 500 mm x 8° - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 4 pairs of outward-folding lashing rings (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the loading platform (LC 10,000 daN) - 1 intermediate table 250 mm - Cut-outs in the outer frame of the loading platform for fastening straps (LC 2,000 daN) - Approx. 48 mm hardwood flooring, checker plate over the axles Nodov Hr Axepfx Ag Njcr Axles and Tyres: - BPW axles, hydro-mechanical forced steering - Technical axle load: 12,000 kg - Air suspension with lifting/lowering valve - Axle tool kit - Tyres: 235/75 R17.5 Braking System: - Braking system compliant with EU regulations, EBS-E (4S3M) Included Accessories: - 2" king pin - Galvanized steel front wall approx. 400 mm high - Yellow-red air couplings on the galvanized front connection panel - 4 wheel chocks with holders on the front wall - Spare wheel with holder in front of the front wall - Electro-hydraulic unit - Remote steering from front and rear via wired remote control, with push buttons and single-track axle monitoring - Recess at rear of gooseneck to accommodate ALU loading ramps - Galvanized, extendable widening by approx. 230 mm per side - European reflector panels (red-yellow) at the rear of the trailer - White reflective stripe compliant with EU regulations on the sides, on the extension, with red reflective stripe at the rear - Holders for warning signs on both the gooseneck and rear plate, including sockets left and right - Galvanized folding supports under the rear bevel of the loading platform - Mounting bracket for a beacon at the rear of the trailer - Central lubrication system with 2 BEKAMAX (Pico) pumps, standard grease NLGI-2, removable pump guard - Mud flap at the rear of the trailer - Manual and documentation - On the gooseneck: Removable ALU side walls and rear wall approx. 2,440 x 400 mm - Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) - 4 pairs of WADER container locks in the loading platform for one 20ft, two 20ft, 40ft, or one 45ft container - 8 pairs of stake pockets for 100 x 50 mm plug-in stakes in the external frame of the loading platform - Adjustable plug-in rails for ALU loading ramps at the rear of the vehicle - Lift axle on the front axle with control via TEBS E according to current axle load and loading condition - Four approximately 400 mm extendable warning signs, approx. 423 x 423 mm, each with a position light - Beacon bracket on the warning signs - Wireless remote control for rear steering in addition to cable remote, with indicator lights on receiver for single-track monitoring - Painted sand layer on checker plate above king pin and loading platform for slip resistance - 80 km/h speed sticker at the rear - Load gauge for determining axle loads including load chart

Durumu: yeni, azami yük ağırlığı: 40.320 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of vehicles, including those available immediately and at short notice, on our website. Equipment excerpt. Full equipment details available upon request. Gooseneck: * Gooseneck with rear chamfer of approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick. Loading area with 5 pairs of folding lashing rings to the outside (LC 5,000 daN) * 3 pairs of folding lashing rings to the outside (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring, approx. 48 mm thick, with checker plate surface above the axles Landing legs: JOST mechanical landing legs with 2-speed gearbox, lift capacity approx. 24 t (test load approx. 50 t) Tyres: * Tyres 205/65 R17.5 - brand of our choice TPMS: * TPMS tyre pressure monitoring system pursuant to ECE R 141 Axles: * BPW axles, two rigid axles, two steering axles Ncjdpfxjy Aug De Ag Nor * Air suspension with lifting/lowering feature * Drum brakes * Self-tracking steering axles with electro-magnetic reverse lock, activated via reverse gear or manually Brake system: * WABCO braking system according to EU regulations with EBS-E (4S3M) Electrical system: * Electrical system according to EU standards, 24 volt LED lighting by ASPÖCK-NORDIK (ASS3) * All LED side marker lamps flash synchronously with the indicator * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731, 15-pin ISO-12098 Steel construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * HRM metallization of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimum corrosion protection * Trailer color RAL 3002 Carmine Red * Wheels Silver Grey * Tarpaulin RAL 9006 (brilliant direct) Options included: * One mounting bracket each for warning signs on the left and right at the gooseneck and rear, including socket * 2-inch king pin * Galvanized steel bulkhead * Yellow-red air couplings at the galvanized front connection strip * 4 wheel chocks with holder mounted on the bulkhead * 3-level wooden boards * Galvanized folding supports under the loading area chamfer * Mount for beacon at the rear of the trailer * Height-adjustable tarpaulin structure – approx. 3,960 mm * Galvanized front bulkhead with a tensioning mechanism for the sliding curtains. Height-adjustable by approx. 400 mm * EDSCHA roof, forward-slidable on ALU roof bearer profiles (bolted to front and rear wall) * 3 pairs of sliding stanchions in the loading area * The body can be hydraulically widened at the rear to the left and right by approx. 750 mm * Sliding roof with fold-up portal beam * Sliding tarpaulin with 700 mm surplus in length, with tension straps approx. every 600 mm. Height to top edge of body approx. 3,960 mm (loaded) * Driving with the sliding roof open is not permitted and will cause damage to the tarpaulin * Rear of the body with closed anodized ALU swing doors * Hook-in rail for ALU drive-on ramps at the rear of the vehicle * Control valves for hydraulic body widening mounted on the right trailer side * White reflective tape in accordance with EU regulations, red tape at the rear * Electro-hydraulic unit mounted at rear under loading area * Mud flaps at the rear of the trailer * European reflective warning signs (red-yellow) at the rear of the tr

Durumu: yeni, azami yük ağırlığı: 36.020 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including immediately and soon-to-be available models, on our website. Excerpt from the equipment. Full specification available upon request. Gooseneck: * Gooseneck with rear bevel, approx. 750 mm x 10° Nsdpfx Ajy Auhuog Nocr * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Load area: * Load area with rear bevel, approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the load area (LC 10,000 daN) * Hardwood flooring, approx. 48 mm thick; over the axles, chequer plate covering Two-part steel ramps: * 1 pair of galvanized, two-part steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating (C40/5). Point load approx. 2.8 t on a 20 x 20 cm area * Ramps with hydraulically foldable sections and hydraulic lifting device * Maximum load per pair: 30,000 kg Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 fixed axles, 1 trailing steer axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lift and lower valve Tyres: * Tyres: 235/75 R 17.5 3PMSF – make at our discretion TPMS: * Tyre Pressure Monitoring System (TPMS) according to ECE R 141 Braking system: * WABCO braking system compliant with EU regulations, with EBS-E (2S2M), without connection lines to the tractor unit Steel construction: * High-strength fine-grained steel construction * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Coating: * HRM metallization of the entire chassis using ZINACOR 850 (85% zinc / 15% aluminium) for optimal corrosion protection * Final coating with 2 layers of 2-component topcoat, single-colour, RAL 3002 carmine red, according to RAL System 841GL * Rear section metallized and painted in RAL 9010 (pure white) * Wheel rims in silver Incl. accessories: * One bracket each for warning signs (left/right) at gooseneck and rear, incl. socket * 1 spare wheel carrier under the load area on the right * 2-inch kingpin * One galvanized steel front wall * At the galvanized front connection rail: yellow-red air couplings * 4 wheel chocks with holders at the front wall * 3-tier wooden planks * Galvanized folding supports under the rear bevel * Holder for beacon at the rear of the trailer * Height-adjustable curtain structure – approx. 3,960 mm * Galvanized front wall with locking mechanism for sliding curtains, height adjustable by approx. 400 mm * EDSCHA brand roof, forward-slidable on aluminium roof profile (bolted to front and rear walls) * 3 pairs of movable stanchions in the load area * Body hydraulically expandable to left/right at rear by approx. 750 mm * Sliding roof with high-lift portal carrier * Sliding curtain with approx. 700 mm extra length, tensioning straps spaced approx. 600 mm apart. Height O

Durumu: yeni, azami yük ağırlığı: 37.980 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full equipment details upon request. Gooseneck: * Gooseneck with front beveled corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Load platform in extendable design: * Extendable load platform with rear bevel approx. 1,000 mm x 8° * 6 pairs of folding lashing rings to the outside (LC 5,000 daN) * 3 pairs of folding lashing rings to the outside (LC 10,000 daN) * 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN) Nodpfx Aey Aufmog Nscr * Cutouts in the outer frame of the loading area for attaching tie-down straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * Tyres 235/75 R 17.5 3PMSF – make of our choice TPMS: * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the towing vehicle via the standardised EBS interface according to ISO 11992. For correct display, the towing vehicle must be capable of transmitting and displaying this data. Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock, can be activated via reverse gear and manually * Air suspension with raise/lower valve * Axle tool Brake system: * Brake system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel construction: * Steel construction of high-strength fine-grained steels * Steel grades: S355J2+N / S355MC (yield strength 355 MPa), S690QL / S700MC (yield strength 690 MPa) Painting: * Complete steel structure automatically blast-cleaned after welding with shot-blasting system * Secondary blasting with corundum for optimum coating adhesion * Final painting with 2 layers of 2K topcoat, single-colour in RAL 3002 carmine red, according to RAL system 841GL * Wheel rims in silver grey * Rear section metalized and painted in RAL 9010 (pure white) * Paint system tested in salt spray fog test according to ISO 9227-NSS * Cavity sealing with special wax Electrical system: * Electrical system according to EU regulations, lighting 24 volts ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO 1185 24S ISO 3731 15-pin ISO 12098 Accessories included: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * One spare wheel holder in front of the front wall * Yellow-red air couplings on the galvanized connection strip at the front * 4 wheel chocks with holder at the front wall * Provision at the rear of the gooseneck for ALU loading ramps * Galvanized folding supports under the rear bevel of the loading area * On the gooseneck and rear panel left and right, each with a holder for warning boards including socket * Load manometer to determine axle loads including load diagram * On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable (superstructure length approx. 2,560 mm) * One galvanized toolbox integrated in the beveled gooseneck * 3 pairs WADER C

Durumu: kullanılmış, boş ağırlık: 10.650 kg, azami yük ağırlığı: 40.310 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 10/2024, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 760 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5, renk: gri, Üretim yılı: 2024, işletme ağırlığı: 10.650 kg, Donanım: ABS, A current and comprehensive inspection and function report is provided with every used semi-trailer. Gooseneck: - Gooseneck with 30 mm thick hardwood flooring - Gooseneck, straight design at rear - 3 pairs of lashing rings (LC 5,000 daN) Loading Area: - Extendable loading platform - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) - Cut-outs in the outer frame for attaching tensioning straps (LC 2,000 daN) - Approximately 48 mm thick hardwood floor, anti-slip chequer plate above the axles Axles and Tyres: Ncedsxfa E Uopfx Ag Ner - BPW axles, two rigid axles and two trailing steering axles - Air suspension with drum brakes, raising/lowering function - Trailing steering axles with electro-magnetic reversing lock, activated via reverse gear or manually - Axle tools - Tyres: 205/65 R17.5 Brake System: - WABCO braking system compliant with EU regulations featuring EBS-E (4S3M) Steel Construction: - Structure made from high-strength fine-grain steels - Steel grades: * S355J2+N/S355MC (yield strength 355MPa) * S690QL/S700MC (yield strength 690MPa) Paintwork: - First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat, single-colour in Nova Grey Included Accessories: - Spare wheel carrier in front of headboard - 2" kingpin - Galvanised steel front wall approx. 400 mm high - Galvanised connection strip at the front with yellow-red air couplings - 4 wheel chocks with holder on the front wall - Galvanised foldable supports under the taper of the loading platform - Mount for a beacon at the rear of the trailer - Galvanized, extendable width extensions approx. 230 mm per side - White reflective tape according to EU regulations on sides, extension, and rear (red at rear) - At the gooseneck and rear panel, left and right: one holder each for warning signs including socket - Mudflap at the rear - European reflective plates (red-yellow) at the rear of the trailer - TPMS tyre pressure monitoring system according to ECE R 141 - Removable plug-in ALU drop sides and rear wall on the gooseneck approx. 2,440 x 400 mm - Rear, galvanised plug-in stanchions are removable (body length approx. 2,560 mm) - 7 pairs of WADER container pockets: 1 x 20ft container on loading platform; 1 x 40ft container on loading platform; 1 x 40ft container above gooseneck; 2 x 20ft containers - 7 pairs of stake pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading area - Lift axle on front axle with control via TEBS E depending on actual axle load and current load status - Adjustable hook rail for ALU ramp attachments at the rear of the vehicle - Sand layer painted onto checker plates on gooseneck and loading area as slip protection - Four warning panels, extendable by approx. 400 mm, approx. 423 x 423 mm, each with position light - Warning panels equipped with beacon mount - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads, including load diagram - HRM metal coating (High Resistance Metallisation) on the outer frame - Complete steel structure shot-blasted; subsequently, defined visible surfaces hot-metallized with ZINACOR 850 (zinc 85% - aluminium 15%)

Durumu: yeni, azami yük ağırlığı: 47.300 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.600 mm, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment features. Full equipment details available on request. Gooseneck: * Gooseneck with beveled front corners (approx. 45°) and rear bevel of approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Extendable loading platform with rear bevel of approx. 1,000 mm x 8° * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of flat-mounted lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the platform for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate covering over the axles Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for 24t lift capacity (50t test load) Tyres: * Tyres 235/75 R 17.5 3PMSF, brand of our choice Axles: * BPW axles; two fixed, two self-steering, air suspension, with drum brakes and lift/lower function * The self-steering axles have an electro-magnetic reversing lock, activated via reverse gear or manually * Axle tools Brake System: * WABCO braking system according to EU regulations with EBS-E (4S3M), without connection lines to the tractor unit Steel Structure: * High-strength fine-grain steel construction Ncedpfx Aoyvnfgeg Njr * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical System: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connecting rail with 24N, 24S & 15-pin sockets according to ISO (24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098) Paintwork: * Premium, long-lasting corrosion protection for the shot-blasted welded frame, provided by a 2-component (2K) zinc-rich primer * High-quality 2-component (2K) top coat, single-color in RAL 3002 Carmine Red * Rear section metallized and painted RAL 9010 (Pure White) * Rims in silver Accessories: * Spare wheel holder in front of the front wall (without spare wheel) * 2" king pin * Galvanized steel front wall approx. 400 mm high * Yellow-red air couplings on the galvanized front connection rail * Recess at the rear of the gooseneck for ALU loading ramps * Galvanized folding supports under rear bevel of platform * Bracket for warning beacon at trailer rear * Brackets on both sides of gooseneck and rear for warning panels incl. socket * TPMS tyre pressure monitoring system according to ECE R 141 * Removable ALU side and rear boards on gooseneck, approx. 2,440 x 400 mm (L x H); galvanized rear posts removable (superstructure length approx. 2,560 mm) * Galvanized toolbox integrated in the beveled gooseneck * 3 pairs of WADER container pockets in the platform for one 20' (30') or one 40' container * Adjustable mounting rails for ALU loading ramps at the vehicle rear * 6 pairs of stake pockets for removable stakes approx. 100 x 50 mm in the outer frame of the platform * Galvanized outriggers extendable by approx. 230 mm per side * Lift axle on the front axle with TEBS E control depending on current axle load and load condition * 2 LED reversing lights mounted on rear panel * 2 pairs of ferry-

Durumu: yeni, boş ağırlık: 11.000 kg, azami yük ağırlığı: 38.500 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Platform: - Telescopic loading platform with rear chamfer approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm Njdsup U Hzepfx Ag Nscr - Wheel recesses with 15 x 15 mm square climbing strips and lower section widenings - Between the 1st and 2nd axle, a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm - Recess in the bevel and extending into loading platform for excavator stick approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the platform (LC 10,000 daN) - 5 pairs of outward-folding lashing rings (LC 5,000 daN) - 2 pairs of outward-folding lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in excavator stick recess (LC 5,000 daN) - Cut-outs in outer frame of loading platform for securing straps (LC 2,000 daN) - Incl. 3-piece removable galvanized covers over wheel recesses – max. point load 3.5 t / each Two-Piece Steel Ramps: - One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm hardwood covering - Ramp with hydraulically folding ramp sections, hydraulic lifting mechanism, and hydraulically shiftable Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock activated via reverse gear and manually - Air suspension with lifting and lowering valve - Axle tools - Tyres 235/75 R 17.5 - TPMS tyre pressure monitoring system in accordance with ECE R 141 Accessories Included: - Brackets for warning panels left and right on gooseneck and rear, incl. socket - One spare wheel - 2" kingpin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on galvanized connection rail at front - 4 wheel chocks - Galvanized, extendable widenings by approx. 230 mm per side - Galvanized folding supports under rear bevel of platform - Bracket for beacon at rear of trailer - Cover plates to bridge the gap between ramps and platform - White reflective tape to EU regulations on sides and extension, red at the rear - Electro-hydraulic unit at rear, under loading platform - Control valves for ramps positioned on right side of trailer - European reflector signs (red-yellow) on rear of trailer - Four extendable warning panels by approx. 400 mm, approx. 423 x 423 mm, with a position light - Mount for beacon on warning panels - Removable ALU sideboards and tailgate on gooseneck approx. 2,440 x 400 mm - Rear galvanized removable stakes (body length approx. 2,560 mm) - 2 pairs WADER container locks in the loading platform for one 20ft or 30ft container - 3 pairs of stake pockets for plug-in stanchions 100 x 50 mm on the outer frame of the platform - One removable galvanized intermediate table with 1 pair WADER container locks - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the platform bevel - Anti-slip coated sand layer on tread plates of gooseneck and platform - 80 km/h speed limit stickers on the rear and on both sides - Load gauge for determining axle loads, including load diagram

Durumu: yeni, boş ağırlık: 14.800 kg, azami yük ağırlığı: 61.700 kg, toplam ağırlık: 76.500 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, lastik boyutu: 235/75/r17,5, renk: gri, Donanım: ABS, Gooseneck: • Gooseneck with rear bevel approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Loading platform: • Extendable loading platform with rear bevel approx. 500 mm x 8° • 9 pairs of outwards folding lashing rings • 1 pair of flat lashing rings at the front of the loading platform • Cut-outs in the outer frame for attaching tension belts • Approx. 48 mm thick hardwood flooring, checker plate covering above axles Landing gear: • JOST mechanical landing legs with 2-speed gearbox, lifting capacity 24 t (test load 50 t) Axles and tyres: • BPW axles and suspension, 1st axle steering, 2nd and 3rd fixed, 4th and 5th trailing axles • Technical axle load: 12,000 kg • 1st, 4th and 5th axle with electro-magnetic reverse lock, activated via reverse gear and manually • Tyres 235/75 R 17.5 3PMSF Braking system: • WABCO brake system in accordance with EU regulations, incl. EBS-E (4S3M) Paintwork: • First class and long-lasting corrosion protection of the standard-shot-blasted welded frame, guaranteed by a 2-component zinc-rich primer • High-quality 2-component top coat, single colour MB 7350 Novagrau • Rear section metallised and painted RAL 9010 (pure white) Steel construction: • Fabricated from high-tensile fine-grained steels • Steel grades: • S355J2+N/S355MC (yield strength 355MPa) • S690QL/S700MC (yield strength 690MPa) Equipment: • One spare wheel with holder in front of the bulkhead • 2" kingpin • Galvanised steel front bulkhead approx. 400 mm high • Yellow-red air couplings on galvanised connection strip at the front • 2 wheel chocks with holder mounted to the bulkhead • Provision at rear of gooseneck for ALU loading ramps • Galvanised extendable deck wideners, approx. 230 mm per side • Bracket for beacon at the rear of the trailer • Galvanised supports under the rear bevel of the loading platform • White reflective tape to EU regulations on sides, extension; red at the rear • Mounting hardware for warning signs with socket at gooseneck and rear, left and right • Detachable ALU side and rear boards on gooseneck, approx. 2,440 x 400 mm • Removable rear galvanised stanchions (body length approx. 2,560 mm) • 3 pairs of WADER container locks in platform for 20ft (30ft) or 40ft container • 7 pairs of stanchion pockets for 100 x 50 mm stanchions in outer frame • Lift axle on front axle with TEBS E control, responsive to axle load and load status • Adjustable mounting rails for ALU loading ramps at rear • 20 x 20 mm square climbing strips every 200 mm on outer frame of the platform bevel • BEKAMAX (Pico) central lubrication system with NLGI-2 grease, removable pump protection • 4 extendable warning signs approx. 423 x 423 mm with position light, extend by approx. 400 mm • Mounting for beacon on warning signs • European reflective plates (red-yellow) at rear of trailer • 80 km/h speed stickers on rear and both sides • Load gauge to determine axle loads including load diagram • HRM Metallisation (High Resistance Metallisation) of outer frame Ncedpjma Hf Rofx Ag Nsr • Complete steel structure shot-blasted; all defined visible areas finished with ZINACOR 850 (85% zinc – 15% aluminium) hot metallisation

Durumu: yeni, boş ağırlık: 10.350 kg, azami yük ağırlığı: 39.150 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Area: - Telescopic loading area with rear incline approx. 1,000 mm x 8° - 1 pair of fixed built-in wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses equipped with 15 x 15 mm square climbing strips and lower-section extensions - 1 pair of fixed wheel recesses between the 1st and 2nd axle, approx. 1,610 x 970 x 400 mm - 3-part removable galvanized covers over wheel recesses (W 670 mm) – max. point load 5 t / pc. - Recess in the ramp and extending into the load area to accommodate an excavator bucket arm approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator arm depression (LC 5,000 daN) - Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) One-piece ALU ramps: - One pair of single-piece ALU ramps approx. 2,500 x 600 mm - Ramps with spring assist and manual lateral adjustment - Maximum load per pair: 24,000 kg Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with raise/lower valve - Axle tools - Tyres 235/75 R 17.5 - TPMS (Tire Pressure Monitoring System) in compliance with ECE R 141 Accessories included: Ncedpfoiu Er Aox Ag Njr - One spare wheel with bracket in front of the bulkhead - 2" kingpin - One galvanized steel bulkhead ca. 400 mm high - Yellow-red air couplings at the galvanized front coupling strip - 4 chocks with bracket at the bulkhead - Accommodation at the rear of the gooseneck for ALU approach ramps - Galvanized extensions, extendable approx. 230 mm per side - Galvanized folding supports under the rear incline of the loading area - Bracket for a rotating beacon at the rear of the trailer - White reflector tape in accordance with EU requirements on sides, red on extension and rear - On the gooseneck and rear panel, bracket for warning boards including socket, left and right - On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm - Removable rear galvanized stanchions (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the load area for a 20ft or 30ft container - 3 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading area - One removable galvanized intermediate table with 1 pair WADER container pockets - 20 x 20 mm square climbing strips every 200 mm along the outer frame of the loading area's rear incline - Non-slip sand coating painted onto the checker plate on the gooseneck and loading area - Four warning boards extendable by approx. 400 mm each, approx. 423 x 423 mm with position light - Bracket for rotating beacon on warning boards - 80 km/h speed stickers on the rear and both sides - Load gauge for axle load determination including load chart - HRM Metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces metallically finished with ZINACOR 850 (Zinc 85% - Alu 15%) hot metalized

Durumu: yeni, azami yük ağırlığı: 38.100 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 13.100 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 760 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5 3PMSF, renk: gri, Donanım: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Platform: 5 pairs of fold-out lashing rings on the outside 3 pairs of fold-out lashing rings on the outside 1 pair of horizontal lashing rings at the front end of the platform Cut-outs in the outer frame of the loading platform for attaching tension straps Approx. 48 mm thick hardwood flooring, checker plate flooring above the axles Landing Gears: JOST landing legs with 2-speed gearbox, lifting capacity 24 t Axles and Tyres: BPW axles, two fixed axles, two steered trailing axles, air suspension, drum brakes, raise/lower function Trailing steering axles with electro-magnetic reverse lock, activated via reverse gear or manually Axle tool Tyres 205/65 R17.5 3PMSF Brake System: WABCO brake system according to EU regulations, with EBS-E Steel Construction: High-strength fine-grained steel construction Steel Grades: S355J2+N/S355MC S690QL/S700MC Electrical Equipment: Electrical system according to EU regulations, lighting: 24 Volt ASPÖCK-NORDIK ASPÖCK-UNIBOX at the front connection panel, with 24N, 24S & 15 pin sockets Connections according to ISO Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by 2-component zinc-dust primer Premium 2-component topcoat, single colour in MB 7350 Novagrau No metallic finish possible Rear section metallized and painted RAL 9010 Accessories Included: 1 spare wheel 205/65 R 17.5 TPMS tyre pressure monitoring system according to ECE R 141 Galvanized front connection bar with yellow-red air couplings 4 chocks with holder at the front wall Mounting at rear of gooseneck for ALU loading ramps Galvanized folding supports under the loading platform’s rear chamfer Holder for a warning beacon at the rear of the trailer Height-adjustable tarpaulin superstructure Galvanized front wall with tensioning mechanism for sliding curtains Height-adjustable by approx. 400 mm Roof brand "EDSCHA" sliding forward on ALU roof support profiles, screwed front and rear walls On platform: 3 pairs of adjustable stanchions Rear of superstructure can be hydraulically widened left and right by approx. 750 mm Sliding roof with upward swinging portal beam Sliding tarpaulin with 700 mm length reserve, securing straps at approx. 600 mm intervals Height upper edge of superstructure approx. 3,960 mm Driving with open sliding roof is not permitted and will damage the tarpaulin Suspension rail for ALU loading ramps at the rear of the vehicle At the gooseneck and at the left and right rear panel: each with a bracket for warning boards including socket Ncedpfx Agotphtms Nsr Mudflap at the rear of the trailer European reflector boards at the rear of the trailer 7 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform Lift axle on the front axle with TEBS E control, depending on current axle load and loading status Rear of superstructure with closed ALU wing doors Anti-slip sand finish painted on checker plates on gooseneck and platform Central lubrication system BEKAMAX, standard grease NLGI-2, removable protective cover for pump 80 km/h speed sticker at rear and on both sides Load gauge for axle load determination including load chart

Durumu: kullanılmış, makine/araç numarası: YAFTL413000014309, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2013, toplam uzunluk: 18.600 mm, toplam genişlik: 2.750 mm, toplam yükseklik: 3.250 mm, süspansiyon: hidrolik, lastik boyutu: 285/70 R19.5, renk: diğer, Üretim yılı: 2013, = Additional Options and Accessories = - Steering axle - Drum brakes = Notes = Chassis Nedpfx Ajxtp Rveg Nscr Diameter of kingpin / fifth-wheel coupling: 2 inch Drum brake: ✓ Body Year of manufacture: 2013 Special transport Detachable gooseneck: ✓ Length over axles: 540 cm Loading platform length: 665 cm Low-loader: ✓ Maximum width: 3 cm (275 cm) Extendable: ✓ = Further Information = Tyre size: 285/70 R19.5 Axle make: SAF Brakes: Drum brakes Suspension: Hydraulic suspension Front axle: Twin tyres; Steered; Left outer tyre tread: 50%; Right outer tyre tread: 65% First middle axle: Twin tyres; Steered; Left inner tyre tread: 15%; Right inner tyre tread: 15% Second middle axle: Twin tyres; Steered; Left outer tyre tread: 20%; Right outer tyre tread: % Rear axle: Twin tyres; Steered; Left inner tyre tread: 45%; Right inner tyre tread: % Body make: Faymonville STBZ-4VA = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Durumu: kullanılmış, makine/araç numarası: YAFTL410000011078, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2010, toplam uzunluk: 18.200 mm, toplam genişlik: 2.750 mm, toplam yükseklik: 2.550 mm, süspansiyon: hava, renk: diğer, Üretim yılı: 2010, Special Transport Length over axles: 560 cm Loading area length: 750 cm Gooseneck length: 500 cm Low loader: ✓ Maximum width: 313 cm Extendable: ✓ Telescopic: ✓ = Further Information = Axle make: SAF Brakes: Drum brakes Suspension: Air suspension Front axle: Twin tyres; Steered; Left outer tyre tread: 80%; Right outer tyre tread: 75% First middle axle: Twin tyres; Steered; Left outer tyre tread: 80%; Right outer tyre tread: 75% Second middle axle: Twin tyres; Steered; Left outer tyre tread: 90%; Right outer tyre tread: 90% Rear axle: Twin tyres; Steered; Left outer tyre tread: 90%; Right outer tyre tread: 90% Gross vehicle weight: 80,000 kg Ncjdpfx Agewid Dle Ner Registration number: Y0101796 = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Durumu: yeni, azami yük ağırlığı: 45.820 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Full specifications available upon request. Gooseneck: * Gooseneck with chamfered front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading platform, extendable design: * Loading platform with extendable section and rear chamfer approx. 1,000 mm x 8° * 5 pairs of outward folding lashing rings (LC 5,000 daN) * 3 pairs of outward folding lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame for attaching tension belts (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate over axles Axles: * BPW axles and suspension * 1st axle rigid, all other axles hydro-mechanically forced steered Njdpfx Aexbmpfeg Necr * Technical axle load: 12,000 kg per axle * Air suspension with raise/lower valve * Axle tools included Tyres: * Tyres 245/70 R 17.5 3PMSF, load index (146/146 F) * Manufacturer at our discretion * TPMS tyre pressure monitoring system according to ECE R 141 * Data transmission to tractor unit via standardised EBS interface per ISO 11992 * For correct display, the tractor unit must support transmitting and displaying these data Landing legs: * JOST landing legs (mechanical), 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Brake system: * Wabco brake system according to EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit Paintwork: * Complete steel structure shot-blasted automatically after welding * Second blasting using corundum for optimum coating adhesion * Final coating with 2 layers of 2K top coat, single color RAL 3002 Carmine Red as per RAL System 841GL * Rims in silver-grey * Rear section metalized and painted in RAL 9010 (pure white) * Metallic paint not available * Coating tested in salt spray test according to ISO 9227-NSS * Cavities sealed with special wax Steel structure: * Steel construction made from high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system according to EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with indicators * ASPÖCK-UNIBOX located on the front connection strip, with 24N, 24S & 15-pin sockets according to ISO * 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Including the following additional equipment: * 2-inch kingpin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings on front galvanized connection strip * Electro-hydraulic unit * Forced steering front/rear via cable remote control (push buttons), with single-track control of the axles (no installation in the tractor unit) * Galvanized folding supports under the rear chamfer of the platform * 1 pair of recessed lashing rings along the rear central member in the chamfer (LC 10,000 daN) * Plug-in aluminium side and rear walls on the gooseneck, approx. 2,440 x 400 mm (L x H) * Rear galvanized plug-in stanchions removable (superstructure length approx. 2,560 mm) * Galvanised toolbox integrated into the chamfered gooseneck * 3 pairs of WADER container pockets in the platform for one 20' (30?) or

Durumu: yeni, azami yük ağırlığı: 39.670 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Ncsdpfx Agsxarlvo Njr Summary of equipment. Full equipment details available upon request. Gooseneck: * Gooseneck with approx. 30 mm thick hardwood flooring * Gooseneck at the rear, straight design * 3 pairs of lashing rings (LC 5,000 daN) Loading Area: * Extendable loading area * 5 pairs of fold-out lashing rings on the outside (LC 5,000 daN) * 3 pairs of fold-out lashing rings on the outside (LC 10,000 daN) * 1 pair of lying lashing rings at the front of the loading area (LC 10,000 daN) * Cutouts in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) * Approx. 48 mm thick hardwood flooring, diamond plate over the axles Landing Legs: JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, two fixed and two self-steering axles * Air suspension with lifting/lowering function * Self-steering axles with electromagnetic reversing lock, can be activated via reverse gear or manually * Drum brakes * Axle tools Tyres: * 205/65 R 17.5 * Brand of our choice * TPMS tyre pressure monitoring system according to ECE R 141 * Data transmission to the tractor via standardised EBS interface according to ISO 11992 * For correct display, the tractor unit must be able to transmit and display this data Brake System: * Brake system in compliance with EU regulations with EBS-E (4S3M), without connector lines to the tractor unit Steel Construction: * Steel structure made from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Painting: * Entire steel structure automatically shot-blasted after welding * Secondary blast treatment with corundum for optimal coating adhesion * HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection * Final paint finish with 2 coats of 2K topcoat, single colour in RAL 3002 carmine red, according to RAL 841GL * Rims in silver * Rear section metallised and painted in RAL 9010 (pure white) * Metallic paints not possible * Paint system tested in salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Electrical System: * Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * All LED side marker lights flash with the indicators * ASPÖCK-UNIBOX on the front connection rail with 24N, 24S & 15-pin sockets; connections according to ISO (24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098) Accessories included: * 2-inch king pin * One spare wheel holder in front of the bulkhead * Yellow-red air couplings on the galvanised front connection rail * Galvanised drop supports under the ramped section of the loading area * One galvanised steel bulkhead (EN12642-XL), approx. 1,600 mm high * Removable ALU side boards and rear gate approx. 2,440 x 400 mm (L x H) on the gooseneck * Rear galvanised plug-in stanchions are removable (body length approx. 2,560 mm) * Support block with 1 pair of WADER container pockets; fifth wheel load approx. 20,000 kg * 7 pairs of WADER container pockets for 1x 20' container in the loading area * 1x 40' container in the loading area, 1x 40' container above the gooseneck, 2x 20' container * 7 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading area * One galvanised crosswise holder under...

Durumu: yeni, azami yük ağırlığı: 36.360 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck: * Gooseneck with front chamfered corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Telescopic loading platform with rear chamfer approx. 1,000 mm x 8° * 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm (L x W x D) * Wheel recesses with square climbing strips approx. 15 x 15 mm as well as lower area widenings * Between the 1st and 2nd axle, one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) * Incl. 3-piece removable galvanized covers over the wheel recesses (width approx. 670 mm) – max. point load 5 t each * Recess in the chamfer and protruding into the loading platform to accommodate an excavator bucket handle (approx. 2,900 x 750 x 210/290 mm – L x W x H) * 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) * 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) * 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN) * 2 pairs of lashing rings in the excavator bucket recess (LC 5,000 daN) * Cutouts in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) Nodsyhkq Uopfx Ag Nocr Two-part steel ramps: * One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering * Ramps with hydraulically foldable ramp sections and hydraulic lifting gear, hydraulically adjustable * Maximum load per pair: 40,000 kg Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 fixed axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lockout via reverse gear and manual activation * Air suspension with lift and lower valve Tyres: * Tyres 235/75 R 17.5 3PMSF – make at our discretion TPMS: * TPMS Tyre Pressure Monitoring System according to ECE R 141 Brake system: * WABCO brake system in accordance with EU regulations with EBS-E (2S2M) Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure optimal corrosion protection * Final coating with two layers of 2K topcoat, single-color in RAL 3002 Carmine Red, according to RAL System 841GL * Rims in silver-grey Incl. the following additional features: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * 3 pairs of recessed lashing rings along the central beam (LC 5,000 daN) * Electro-hydraulic unit at the rear, under the loading platform * On the gooseneck, plug-in aluminum side and rear panels, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable. (Body length approx. 2,560 mm) * One galvanized toolbox, integrated into the chamfered gooseneck * 2 pairs of WADER container pockets in the loading platform for a 20' or 30' container * 3 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading platform * 3 pairs of additional removable, galvanized covers over the wheel recesses – max. point load 3.5 t each * One removable galvanized intermediate table with 1 pair of WADER container pockets * 1 additional hook-on intermediate table, ap

Durumu: yeni, azami yük ağırlığı: 37.075 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment details. Complete specification available upon request. Gooseneck: * Gooseneck with front corners chamfered approx. 45°, with rear bevel approx. 750 mm x 10° * 3 pairs lashing rings (LC 5,000 daN) Ncjdpfx Agsyhkrrj Nsr * Hardwood flooring, approx. 30 mm thick Loading platform: * Loading area aft of the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8° * 6 pairs outward-folding lashing rings (LC 5,000 daN) * 2 pairs outward-folding lashing rings (LC 10,000 daN) * 1 pair inward-folding lashing rings at the central beam front (LC 10,000 daN) * Cutouts in the external frame of the loading area for securing strap hooks (LC 2,000 daN) * Grating floor covering C40/4 (point load approx. 2.3 t over an area of approx. 20 x 20 cm), checker plate floor covering above the axles Two-piece steel ramps: * One pair galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t over an area of approx. 20 x 20 cm) * Ramp with hydraulically foldable ramp sections * Hydraulic lifting unit, hydraulically adjustable * Maximum load capacity per pair: approx. 40,000 kg Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steered axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lifting and lowering valve Brake system: * WABCO brake system according to EU regulations with EBS-E (2S2M) Tyres: Tyres 235/75 R 17.5 3PMSF – make at our discretion TPMS: * Tire Pressure Monitoring System (TPMS) according to ECE R 141 Paintwork: * HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection * Final coating with two layers of 2K top coat, single color in RAL 3002 Carmine Red in accordance with RAL System 841GL * Wheels in silver grey Accessories included: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * Grating floor covering in the gooseneck bevel C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * Grating floor covering in the loading platform bevel C40/4 (point load approx. 3.4 t over an area of approx. 20 x 20 cm) * Electro-hydraulic unit at the rear beneath the loading area * On the gooseneck – plug-in aluminum side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized stake pockets are removable (body length approx. 2,560 mm) * One electric cable winch with remote control, approx. 5,400 kg pulling force, incl. wire rope approx. 9.5 mm thick, approx. 24 m long, with guide roller * Bolted approx. 5t ring for winch cable insertion on the gooseneck without deflection roller * One galvanized toolbox, integrated in the gooseneck bevel with an opening for a winch * Grating floor covering on the gooseneck C30/3 (point load approx. 2t over an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stanchions approx. 100 x 50 mm in the external frame of the loading area * Lift axle on the front axle, controlled via TEBS E in accordance with current axle load and loading condition * 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs at the r

Durumu: yeni, azami yük ağırlığı: 37.075 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment list. Full specifications available on request. Gooseneck: * Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approx. 30 mm thick Loading Platform: * Platform behind the gooseneck hydraulically liftable and lowerable, approx. 2,800 mm long, with rear chamfer approx. 1,000 mm x 8° * 6 pairs of fold-out lashing rings (LC 5,000 daN) * 2 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of fold-in lashing rings on the central beam at the front (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching tension belts (LC 2,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over axles with checker plate Two-piece Steel Ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding and unfolding ramp sections. Hydraulic lifting, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing Gear: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lift and lower valve Brake System: Ncsdoyhkqzopfx Ag Nsr * WABCO braking system in accordance with EU regulations, with EBS-E (2S2M) Tires: * Tires 235/75 R 17.5 3PMSF – brand at our discretion TPMS: * TPMS tire pressure monitoring system in accordance with ECE R 141 Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) ensuring optimal corrosion protection * Final paint with 2 layers of 2K top coat, single color in RAL 3002 carmine red, in accordance with RAL System 841GL * Wheels in silver-gray Accessories included: * 2-inch kingpin * Galvanized steel front wall approx. 400 mm high * Grating surface in the gooseneck chamfer C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating surface in the loading platform chamfer C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Painted sand layer as anti-slip on the checker plates above the kingpin and platform * Electro-hydraulic unit at rear beneath the loading platform * On the gooseneck: plug-in aluminum side boards and rear board, approx. 2,440 x 400 mm (L x H). The rear galvanized stakes are removable. (Body length approx. 2,560 mm) * Electric cable winch with radio remote control, lifting force approx. 5,400 kg, incl. approx. 9.5 mm thick wire cable, approx. 24 m long, with cable guiding roller * Bolted approx. 5 t ring for redirecting the winch cable on the gooseneck without guide pulley * One galvanized toolbox integrated in the chamfered gooseneck with an opening for a cable winch * Grating surface on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stakes, approx. 100 x 50 mm, in the outer frame of the loading platform * Lift axle on the front axle, controlled via TEBS E based on current axle load and loading status * 7 pairs inst...

Durumu: yeni, azami yük ağırlığı: 38.800 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5 3PMSF, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with front corners chamfered at 45° and rear bevel approximately 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable Loading Platform: - Extendable loading platform with rear bevel approximately 1,000 mm x 8° - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, over-axle areas with checker plate Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 self-tracking axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear or manually - Air suspension with raise/lower valve - Axle tools - 235/75 R 17.5 3PMSF Brake System: - WABCO braking system complying with EU regulations, with EBS-E (2S2M) Nodpfeuqlmnox Ag Njcr Landing Legs: - JOST mechanical landing legs with 2-speed gearbox, 24 t lifting capacity (50 t test load) Accessories Included: - One spare wheel with holder in front of the front wall - 2" kingpin - Galvanised steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanised front connection strip - 4 wheel chocks with holders on the front wall - Bracket for beacon at rear of trailer - Recess at rear of gooseneck for ALU entry ramps - Galvanised folding supports under the loading platform's rear bevel - Cover plates to bridge gap between ramps and loading platform - White reflective tape according to EU regulations on sides, extendable section, and rear in red - Electro-hydraulic unit at the rear, under the loading platform - Brackets for warning signs on both left/right of gooseneck and ramps, with socket - Ramp control valves fitted on right-hand side of trailer - Mudflap at the trailer rear - Manual and documentation on USB stick - ALU side boards and rear wall on gooseneck approx. 2,440 x 400 mm - Rear galvanised plug-in stanchions, removable (superstructure length approx. 2,560 mm) - Four approx. 400 mm extendable warning signs, approx. 423 x 423 mm, each with a position light - 3 pairs of WADER container locks in the loading platform for 20ft, 30ft or 40ft container - 6 pairs of stake pockets 100x50 mm in outer frame of loading platform - Galvanised extendable width extensions, approx. 230 mm per side - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading platform bevel - Sanded, painted anti-slip layer on checker plates over kingpin and loading platform - Holder for beacon on warning signs - European reflector boards (red-yellow) at the rear - 80 km/h speed limit stickers on rear and both sides - Load manometer for determining axle loads including load chart - HRM Metallisation (High Resistance Metallisation) of outer frame - Complete steel structure shot-blasted, then defined visible surfaces metallised with ZINACOR 850 (Zinc 85% - Aluminium 15%) hot-finished

Durumu: yeni, boş ağırlık: 10.600 kg, azami yük ağırlığı: 39.400 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 760 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5, renk: gri, işletme ağırlığı: 10.600 kg, Donanım: ABS, Swan-neck: - Swan-neck with 30 mm thick hardwood flooring - Swan-neck at the rear in straight design - 3 pairs of lashing rings (LC 5,000 daN) Extendable loading platform: - Loading platform in extendable version - 5 pairs of fold-out lashing rings - 3 pairs of fold-out lashing rings - 1 pair of horizontal lashing rings at the front of the loading platform - Cut-outs in the outer frame of the loading platform for attaching tension belts - Hardwood flooring approx. 48 mm thick, checker plate covering above the axles Landing legs: - JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and tyres: - BPW axles, two fixed and two steering axles - Air suspension, drum brakes, with lift/lower function - The steering axles can be locked electro-magnetically via reverse gear or manually - Axle tools - Tyres: 205/65 R17.5 Brake system: - Brake system according to EU regulations with EBS-E (4S3M) Steel construction: - Steel structure made of high-strength fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations, 24 volt lighting, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection strip, with 24N, 24S & 15-pin sockets - Connections according to ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Paintwork: - First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat, single colour in Nova grey - Rear section metallized and painted in RAL 9010 (pure white) Included accessories: - One spare wheel with holder located in front of the bulkhead - 2" king pin - Galvanized steel front wall approx. 400 mm high - Yellow-red air couplings on the front galvanized connection strip - 4 wheel chocks with holder at the bulkhead - Galvanized folding supports under the sloped part of the loading platform - Holder for rotating beacon at the rear of the trailer - Galvanized, extendable width extensions approx. 230 mm per side - White reflective tape according to EU regulations on sides, at extension section, and red at rear - On swan-neck and rear panel: one mount each for warning panels including socket (left and right) - European reflective warning boards (red-yellow) at the rear of the trailer - TPMS tyre pressure monitoring system in accordance with ECE R 141 - On the swan-neck: removable ALU side panels and tailboard approx. 2,440 x 400 mm - The rear, galvanized stanchions are removable (length of superstructure approx. 2,560 mm) - 7 pairs of WADER container locks - 1x 20ft container on the loading platform; 1x 40ft container on the loading platform; 1x 40ft container over the swan-neck; 2x 20ft containers - 7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the loading platform - Lift axle at the front axle, controlled by TEBS E in relation to current axle load and loading status Ncodpfx Ajt Ag Uwjg Njr - Sliding hook-in rail for ALU loading ramps at the rear of the vehicle - Sanded, anti-slip coating painted onto checker plate on swan-neck and loading platform - Four warning panels extendable by approx. 400 mm each, approx. 423 x 423 mm, with a position lamp - Mount for rotating beacon on warning panels - Speed stickers 80 km/h at the rear and on both sides - Load gauge to determine axle loads, including load chart

Durumu: yeni, boş ağırlık: 7.900 kg, azami yük ağırlığı: 41.600 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, işletme ağırlığı: 7.900 kg, Donanım: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Area: - Loading area with rear bevel approx. 1,000 mm x 8° - Recess in the bevel and extending into the loading area for accommodating the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm - Cut-outs in the outer frame of the loading area for attaching tensioning straps - Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Landing Gear: - JOST landing legs (mechanical) with 2-speed gearbox, lifting capacity 24 t (test load 50 t) Axles and Tyres: - BPW axles and suspension, 2 fixed axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with lift and lower valve - TPMS tyre pressure monitoring system as per ECE R 141 - Tyres: 235/75 R 17.5 Paintwork: - Complete steel structure automatically blasted with shot blasting machine after welding - Second blasting with corundum for optimal coating adhesion - Final painting with 2 coats of 2K topcoat, single colour RAL MB 7350 Novagrau - Rims painted silver - Rear section metallised and painted RAL 9010 (Pure White) - Cavities sealed with special wax Electrical System: - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connection bar with sockets: 2 x 7-pin & 1 x 15-pin Accessories Included: - Numerous lashing positions - 2" king pin - One galvanised steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanised front connection bar - 4 wheel chocks with holder on the front wall - Holder at the rear of the gooseneck for ALU loading ramps - Galvanised folding support legs under the rear bevel of the loading area - Holder for rotating beacon at the rear of the trailer - Galvanised, extendable widenings approx. 230 mm per side - White reflective tape to EU regulations on the sides, red at the rear - Holders for warning panels with socket at the gooseneck and rear crossmember, left and right - Removable ALU sideboards and rear board on the gooseneck, approx. 2,440 x 400 mm - Removable rear galvanised stakes - 2 pairs of WADER container pockets in the loading area for a 20ft container - 6 pairs of post pockets (for 100 x 50 mm stakes) in the outer frame of the loading area - Movable mounting bar for ALU loading ramps at the rear of the vehicle - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading area bevel - Anti-slip sand coating applied to checker plates on gooseneck and loading area - Four extendable warning signs, approx. 400 mm extension, size 423 x 423 mm, each with a position light - Bracket for rotating beacon on the warning signs Nodpfsunrapsx Ag Nscr - 80 km/h speed stickers at rear and on both sides - European reflector panels (red/yellow) at rear of trailer - Manual and operating instructions on USB stick - HRM metallisation (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then all defined visible surfaces hot-finish metallised with ZINACOR 850 (zinc 85% - alu 15%)

Durumu: kullanılmış, azami yük ağırlığı: 39.780 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2023, bir sonraki muayene (TÜV): 01/2027, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our entire stock of vehicles, including those available for immediate or short-term delivery, on our website. Extract from the equipment list. Complete specification upon request. Gooseneck: * Gooseneck with approx. 45° chamfered front corners and a rear chamfer of approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Extendable loading bed * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the loading bed (LC 10,000 daN) * Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, chequer plate flooring above the axles Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: * Tyre size 205/65 R 17.5, twin-mounted Nsdpfjx Uvlrjx Ag Nscr Axles: * BPW axles, two fixed axles, two air-suspended self-steering axles, with drum brakes and lift/lower function * The self-steering axles have an electromagnetically controlled reverse lock, operable via reverse gear or manually Brake system: * Brake system compliant with EU regulations with EBS-E (4S3M), without connection lines to the tractor unit Steel structure: * High-strength fine-grained steel construction * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * Premium and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer * High-quality single-colour 2-component (2K) top coat in RAL 3002 Carmine Red * Rear section metallised and painted in RAL 9010 Pure White * Rims in silver Electrical system: * Electrical system according to EU regulations Lighting: * 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connection strip with sockets 24N, 24S & 15-pin connection per ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Included accessories: * 2-inch kingpin * Galvanised steel front wall approx. 400 mm high * Spare wheel carrier in front of the front wall * Yellow-red air couplings mounted on the galvanised connection rail at the front * 4 wheel chocks with holders on the front wall * Mountings at the rear of the gooseneck for aluminium loading ramps * Galvanised folding supports under the rear slope of the loading area * Bracket for a beacon at the rear of the trailer * Yellow reflective tape as per EU regulations at sides, extension, and rear * Mounts for warning plates, left and right on the gooseneck and rear panel, including socket * Mudflap at the rear of the trailer * Manual and documentation on USB stick * European reflective plates (Red-Yellow) at the rear * 80 km/h speed stickers at the rear and both sides * Audible reverse warning signal * Load pressure gauge for axle load determination, including load chart

Durumu: yeni, azami yük ağırlığı: 37.820 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory with immediately or short-term available vehicles on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck: Gooseneck with front corners beveled at approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Load platform: * 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) * Wheel recesses with square climbing strips approx. 15 x 15 mm and widenings at the lower section * Between the 1st and 2nd axle: one pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D) * Incl. 3-piece removable galvanized covers over the wheel recesses (width approx. 670 mm) - max. point load approx. 5 t/each * Recess in the beveled area and extending into the load platform for accommodating the excavator dipper stick (approx. 2,900 x 750 x 210/290 mm (L x W x H)) * 1 pair of horizontally mounted lashing rings at the front of the loading area (LC 10,000 daN) * 5 pairs of outward foldable lashing rings (LC 5,000 daN) * 3 pairs of outward foldable lashing rings (LC 10,000 daN) * 2 pairs of lashing rings in the excavator boom recess (LC 5,000 daN) * Cut-outs in the outer frame of the load platform for attaching tensioning straps (LC 2,000 daN) One-piece steel ramps: * 1 pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering * Ramp with hydraulic lifting system, hydraulically adjustable * Maximum load per pair: 40,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not have to be included in the vehicle length when in driving position Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: Ncedpfxow Tpqwo Ag Njr * BPW axles and suspension, 2 axles rigid, 1 axle self-steering * Technical axle load: 12,000 kg each * Electromagnetic reversing lock, can be engaged via reverse gear and manually * Air suspension with lift and lower valve * Axle tools Tyres: * Tyres 235/75 R 17.5 3PMSF – Brand of our choice * TPMS tyre pressure monitoring system as per ECE R 141. Data transfer to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be capable of both receiving and displaying this data Brake system: * WABCO brake system in compliance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system as per EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection bar with 24N, 24S, and 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Coating: * Complete steel structure automatically shot-blasted with turbine system after welding * Second sandblasting with corundum for optimum adhesion of the coating system * HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure the best corrosion protection * Final coating with two layers of 2K topcoat, plain color RAL 3002 Carmine Red in accordance with RAL system 841GL * Rims in silver * Rear section metalliz

Durumu: yeni, azami yük ağırlığı: 38.140 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Partial equipment list. Full specifications available on request. Gooseneck: - Gooseneck with approx. 45° chamfered front corners and a rear bevel of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approx. 30 mm thick Loading area: - Telescopic loading area with rear bevel approx. 1,000 mm x 8° - Between the 1st and 2nd axle, one pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece removable, galvanized wheel recess covers (approx. 670 mm wide - max. point load 5 t each) - 1 pair of recessed lashing rings at the front of the loading deck (LC 10,000 daN) - 4 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - Cut-outs in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: Tyres 235/75 R17.5 3PMSF, brand at our discretion - TPMS tyre pressure monitoring system according to ECE R 141 - Data transmission to the truck via the standardised EBS interface per ISO 11992 - For correct display, the truck must be capable of transmitting and displaying this data. Axles: - BPW axles and suspension, 2 fixed axles, 3rd axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activatable via reverse gear and manually - Air suspension with lift and lower valve. Axle tools Brake system: Ncsdpjw Tpq Djfx Ag Njr - WABCO braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Electrical system: - Electrical system in accordance with EU regulations - LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel structure: Steel frame made of high-strength fine-grain steels. - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Entire steel structure is automatically blasted after welding using a turbine blasting system - Second blasting with corundum for optimal coating adhesion - HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure top corrosion protection - Final painting with two coats of 2K paint, solid colour in RAL 3002 Carmine Red, rear section metallised and painted in RAL 9010 Pure White - No metallic paint possible - Paint finish tested in salt spray test per ISO 9227-NSS - Sealing of cavities with special wax Including the following accessories: - Mounts for warning signs on both sides at the gooseneck and at the rear, including socket - Spare wheel holder in front of the front wall (without spare wheel) - 2-inch kingpin - Galvanized steel front bulkhead, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection panel - Galvanized folding supports under the loading area bevel - Hardwood impact protection on the rear wall from gooseneck to loading platform - 1 pair of recessed lashing rings along the central frame at the rear on the bevel (LC 10,000 daN) - Aluminium side walls and tailboard on the gooseneck

Durumu: yeni, azami yük ağırlığı: 33.865 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, You can find our complete vehicle stock, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck * Gooseneck with chamfered front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Load Platform * Double extendable version with rear chamfer approx. 500 mm x 8° * 6 pairs of outward folding lashing rings (LC 5,000 daN) * 4 pairs of outward folding lashing rings (LC 10,000 daN) * 1 pair of recess-mounted lashing rings at the front of the loading area (LC 10,000 daN) * 1 cross table approx. 250 mm * Hardwood flooring approx. 48 mm thick, with checker plate coverage over the axles * Cutouts in the outer frame of the loading area for inserting tensioning straps (LC 2,000 daN) Axles * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg per axle * Air suspension with lift and lower valve * Axle tool kit Tyres: * Tyres 245/70 R 17.5, load index (146/146 F) * Brand of our choice Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Brake System: * Brake system compliant with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Paintwork: High-quality, durable corrosion protection * High-quality 2-component (2K) topcoat painted in RAL 3002 carmine red Ncsdpfxew Tprzj Ag Nsr * Rear section metallized and painted in RAL 9010 (pure white) Steel Construction: Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical System: * Electrical system according to EU regulations * Lighting 24 volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Including the following additional equipment: * 2-inch king pin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings at the galvanized front wiring panel * Spare wheel carrier in front of the front wall * Electro-hydraulic power unit * Remote steering from the front and rear via cable remote control with push buttons, with single-track axle alignment (without installation in the tractor unit) * Rear gooseneck mounting point for aluminum loading ramps * Rear hanging rail for aluminum loading ramps * Galvanized folding supports under the rear chamfer of the load platform * On the gooseneck: removable aluminum side boards and rear board, approx. 2,440 x 400 mm (L x H) * Removable galvanized rear stanchions (body length approx. 2,560 mm) * Tool box, galvanized, integrated in the chamfered gooseneck * 4 pairs of WADER container pockets in the load area for 1x 20', 2x 20', 40', or 45' containers * 8 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the cargo area * Galvanized wideners, extendable by approx. 230 mm per side * Movable hanging rails for aluminum loading ramps at the rear of the vehicle * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * Central lubrication system with 2 BEKAMAX (Pico) pumps using NLGI-2 standard grease and removable protection around the pump * 2 LED reversing lamps mounted on the rear panel * HRM Metallization (High Resistance Metallisation). Complete steel structure sh