İkinci El Avant_Tecno 423 Satın Al (82)

Durum: mükemmel (kullanılmış), güç: 150 kW (203,94 bg), yakıt türü: dizel, renk: sarı, Üretim yılı: 2012, çalışma saatleri: 4.237 h, Year of manufacture: 2012 Drive type: Wheel Number of cylinders: 6 Unladen weight: 17,000 kg Working width: 427 cm Technical condition: very good Visual condition: very good NEW HOLLAND RG 200 B MOTOR GRADER + RIPPER YOM 2012 HOURS 4237 Iiedpfxew Hqb So Adqog Drive configuration: 6x4 Engine: 6-cylinder turbocharged diesel Net power: 200 HP (150 kW) @ 2,200 rpm Operating weight: 35,274 lbs (16,000 kg) Blade length: 14 ft (4.27 m) Maximum blade lift above ground: 17.7 in (450 mm) Maximum blade drop below ground: 28.5 in (725 mm) Hydraulic flow: 34.3 GPM (130 L/min) Transmission: Full Powershift, 6 forward / 3 reverse gears Turning radius: 24 ft 3 in (7.4 m) Travel speed (forward/reverse): 28 mph (45 km/h) / 19 mph (30 km/h) Follow us on Instagram, Facebook, and TikTok to watch videos of our trucks and machines for sale. WIR SPRECHEN DEUTSCH WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Durum: yeni, boş ağırlık: 15.450 kg, azami yük ağırlığı: 65.550 kg, toplam ağırlık: 80.000 kg, dingil konfigürasyonu: > 3 aks, yükleme alanı uzunluğu: 21.900 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 925 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, Donanım: ABS, Gooseneck: Gooseneck in SNT design for optimised load platform length, approx. 3,700 mm long, rear section with incline approx. 1,000 mm x 10°. Technical fifth wheel load: 30,000 kg. Compatible with tractor units: 4x2, 6x2, and 6x4. Loading Platform: Double-extendable loading platform, approx. 8,800 mm long with rear incline approx. 500 mm x 10°. A central support beam features a welded-on support table approx. 300 mm wide, with elongated holes at the front and rear for optional bridging elements that can be hooked in and repositioned. Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective platform length. Axles and Tyres: BPW axles and suspension, first axle steered passively, all other axles with hydro-mechanical forced steering. The first axle is equipped with an electro-magnetic reverse lock, activated via reverse gear or manually. Technical axle load: 12,000 kg. Air suspension with lift and lower valve. Manufacturer at our discretion. Sockets and Lighting: 24-volt lighting system in accordance with EU regulations. ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets. Complete HRM metallisation. Entire steel construction shot-blasted, then hot-dip refined with ZINACOR 850. Paint Finish: 6-step final treatment: Complete steel structure shot-blasted after welding. One coat of zinc-based primer, one coat of bonding primer. Final paint finish with two layers of single-colour 2-pack paint in DB 7350 Novagrey, followed by cavity sealing with special wax. Accessories: Plug-in steel front wall, approx. 400 mm high. Supply line connection bar to tractor unit, mounted at the height of the outer frame profile. ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets. If your pin configuration differs from ISO standards, please notify us. Isdorigw Repfx Adqeig 3 kW electro-hydraulic power pack for hydraulic operations, excluding hydraulic winches. On the gooseneck, 1 pair of plug-in ALU side walls, approx. 400 mm high, anodised finish. 3.5" kingpin. Gooseneck guide plate for the fifth wheel, approx. 500 mm wide. 2 wheel chocks with mounting bracket in front of the front wall. Mechanical landing legs with 2-speed gearbox and crank. Control valves for hydraulic ramps on the right side of the vehicle. 1 pair of mechanical rear supports. Central lubrication system with 1 pump (BEKAMAX brand) using normal grease (NLGI-2 standard). Removable protection for the central lubrication pump(s). Remote axle steering from the front and rear by cable remote control using push-buttons, with single-track control, without installation in the tractor unit. Under the gooseneck and at the rear end cross-member, left and right, one 7-pin socket with bracket for warning boards. One 7-pin socket at the rear end cross-member. Operating manual and documentation included. One one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm, straight version. Please note that special equipment and accessories will usually increase the unladen weight and accordingly reduce the payload capacity. Warning package: 4 warning boards, approx. 423 x 423 mm, extendable by approx. 1,000 mm, incl. 2 LED position lights and mounting brackets for beacon.

Durum: yeni, azami yük ağırlığı: 49.000 kg, toplam ağırlık: 60.800 kg, dingil konfigürasyonu: > 3 aks, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 r 17.5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with front corners beveled at 45° and rear taper approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable Loading Platform: - Loading platform in extendable design with rear taper approx. 1,000 mm x 8° - 5 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) - c. 48 mm thick hardwood flooring, over the axles with checker plate covering Detachable Two-Part Ramps: - One pair of galvanized, two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding ramp sections, hydraulic lifting unit and hydraulically adjustable - Maximum load per pair: 40,000 kg Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: - BPW axles, two rigid axles, two steering trailing axles, air suspension, with drum brakes, with raise/lower function - The trailing steering axles can be locked electromagnetically via reverse gear or manually - Axle tools Ijdpfxsh Etf Ro Adqoig - Tyres: 235/75 R 17.5 Brake System: - Brake system according to EU regulations with EBS-E (4S3M) Steel Construction: - Steel construction made of high-tensile fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Paintwork: - First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat finish in single-colour Novagrau Electrical System: - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front terminal strip with 24N, 24S & 15-pin sockets Accessories Included: - 2" king pin - One galvanized steel front wall approx. 400 mm high - One spare wheel with holder in front of the headboard - Yellow-red air couplings at the galvanized front terminal strip - 4 chocks with holder at the front wall - Mounting at the rear area of the gooseneck for ALU drive-on ramps - Galvanized folding supports under the taper of the loading platform - Bracket for a rotating beacon - Cover plates to bridge the gap between ramps and loading platform - White reflector tape to EU specification on the sides, red at rear and on extension - Electro-hydraulic power pack - On both sides of the gooseneck and ramps, mounting brackets for warning signs incl. socket outlet - Ramp control valves installed on the right trailer side - One mudguard at the rear of the trailer - Instruction manual and description on USB stick - ALU side walls and end wall, plug-in, on gooseneck approx. 2,440 x 400 mm - The rear galvanized plug-in posts are removable (length of structure approx. 2,560 mm) - 4 pairs of WADER container pockets in the loading platform for one 20ft, 2x 20ft or one 40ft container - 7 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the loading platform - Extensions, galvanized, extendable by approx. 230 mm per side - Lift axle on the front axle with control - Square climbing rails 20 x 20 mm - Central lubrication system BEKAMAX - F

Durum: ikinci el, boş ağırlık: 10.600 kg, azami yük ağırlığı: 39.400 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: > 3 aks, ilk tescil: 09/2024, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 760 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5, renk: gri, Üretim yılı: 2024, işletme ağırlığı: 10.600 kg, Donanım: ABS, Kuğu boynu: -30 mm kalınlığında sert ahşap kaplamalı kuğu boynu -Arka kısımda düz tasarımlı kuğu boynu -3 çift sabitleme halkası (LC 5.000 daN) Çekilebilir tasarımlı yükleme alanı: -Çekilebilir tasarımlı yükleme alanı -Dışa doğru katlanabilen 5 çift sabitleme halkası (LC 5.000 daN) -Dışa doğru katlanabilen 3 çift sabitleme halkası (LC 10.000 daN) -Yükleme alanının önünde yatay konumda bulunan 1 çift sabitleme halkası (LC 10.000 daN) -Yükleme alanının dış çerçevesindeki, germe bantlarının takılması için oyuklar (LC 2.000 daN) -Yaklaşık 48 mm kalınlığında sert ahşap kaplama, aksların üzerinde tırtıklı sac kaplama Dingil destekleri: -24 ton kaldırma kapasitesi (50 ton test yükü) için 2 vitesli şanzımana sahip JOST dingil destekleri (mekanik) Dingiller ve lastikler: -BPW dingiller, iki dingil sabit, iki dingil takip direksiyonlu -Hava süspansiyonlu, tambur frenli, kaldırma/indirme fonksiyonlu -Takip direksiyonlu dingiller, elektro-manyetik geri vites kilidi ile geri vites veya manuel olarak etkinleştirilebilir -Lastikler 205/65 R17.5 Fren sistemi: -AB yönetmeliklerine uygun, EBS-E (4S3M) özellikli fren sistemi Çelik konstrüksiyon: -Yüksek mukavemetli, ince taneli çeliklerden yapılmış çelik konstrüksiyon -Çelik kaliteleri: -S355J2+N/S355MC (Akma dayanımı 355 MPa) Ijdpfx Adsw Adkxoqoig -S690QL/S700MC (Akma dayanımı 690 MPa) Elektrik sistemi: -AB yönetmeliklerine uygun elektrik sistemi, aydınlatma 24 volt, ASPÖCK-NORDIK (ASS3) -Ön bağlantı çubuğundaki ASPÖCK-UNIBOX, 24N, 24S ve 15 kutuplu prizler Boya: -Standart olarak bilye ile püskürtülmüş kaynaklı şasiye uygulanan, iki bileşenli (2K) çinko tozlu astar ile garanti edilen, birinci sınıf ve dayanıklı korozyon koruması -Yüksek kaliteli, tek renkli (Novagrau) iki bileşenli (2K) üst kat boya Pakete dahil aksesuarlar: -Ön duvarın önünde bulunan, bir adet yedek lastik ve taşıyıcı -2" Kral pimi -Yaklaşık 400 mm yüksekliğinde, galvanizli çelik ön duvar -Ön galvanizli bağlantı çubuğunda sarı-kırmızı hava bağlantı elemanları -Ön duvarda bulunan, 4 adet tekerlek takozu ve taşıyıcı -Yükleme alanının eğiminin altında bulunan, galvanizli katlanır destekler -Römorkun arka kısmında, döner lamba için bir tutucu -Galvanizli, her iki tarafta yaklaşık 230 mm kadar uzatılabilen genişleticiler -AB yönetmeliklerine uygun, beyaz reflektör şeridi yanlarda, çekilebilir kısımda ve arkada kırmızı -Kuğu boynunda ve arka sacında, sol ve sağ tarafta, priz dahil olmak üzere uyarı levhaları için birer tutucu -Römorkun arkasında bir çamurluk -Römorkun arkasında, Avrupa reflektör levhaları (Kırmızı-Sarı) -USB bellekte kullanım kılavuzu ve açıklamalar -ECE R 141'e uygun TPMS lastik basıncı kontrol sistemi -Kuğu boynunda, yaklaşık 2.440 x 400 mm boyutlarında, takılabilir ALU yan paneller ve arka panel -Arka, galvanizli takılabilir çerçeveler çıkarılabilir, gövdenin uzunluğu yaklaşık 2.560 mm -7 çift WADER konteyner cebi -Yükleme alanında 1 adet 20 ft konteyner; yükleme alanında 1 adet 40 ft konteyner; kuğu boynunun üzerinde 1 adet 40 ft konteyner; 2 adet 20 ft konteyner -Yükleme alanının dış çerçevesinde, 100 x 50 mm boyutlarında, takılabilir çerçeveler için 7 çift çerçeve cebi -Ön dingilde, mevcut dingil yüküne ve mevcut yük durumuna bağlı olarak TEBS E aracılığıyla kontrol edilen, kaldırma aksı -Aracın arka kısmında, ALU dayama rampaları için kaydırılabilir bir takma çubuğu -Kuğu boynundaki ve yükleme alanındaki tırtıklı sacların üzerinde, kaymayı önleyici bir güvenlik önlemi olarak, boyanmış bir kum tabakası -Yaklaşık 400 mm kadar uzatılab

Durum: yeni, boş ağırlık: 11.800 kg, azami yük ağırlığı: 36.700 kg, toplam ağırlık: 48.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 855 mm, süspansiyon: hava, lastik boyutu: 245/70 R17.5, renk: gri, Donanım: ABS, Sabit, orta boru tasarımlı kuğu boynu: - Ön köşeler 90° - Germe kayışı için kesiklerle kapalı dış çerçeve - Alüminyum yükleme rampaları için delikli şerit - 2" - Kral pimi - Sürüş yönünde sağda mekanik olarak çalışan BPW destek ayakları - Kuğu boynu sonunda 550 mm uzunluğunda, 8° eğim - Kuğu boynu platformunda gömülü 3 çift yük sabitleme halkası - Kuğu boynu platformunda 100 x 50 mm boyutunda 2 çift kazık yuvası Yükleme alanı: - Germe kayışı için kesikli, kapalı dış çerçeve - Ön sabit bölüm 360 mm - Kaymaz kaplamalı sac zemin - Yük emniyeti için uzun delikli ekskavatör çukuru - 1. dingil önünde sabit monte edilmiş, 390 mm derinliğinde, eğimde tırmanma çıtalı 1 çift tekerlek çukuru - 1. ve 2. dingil arasında sabit monte edilmiş, 390 mm derinliğinde, eğimde tırmanma çıtalı 1 çift tekerlek çukuru - 3.740 mm teknik maksimum uzatma - "Premium" alüminyum tekerlek çukuru kapakları, 600 mm tam genişlikte, 3.000 mm'ye kadar genişletilebilir, 8 t teker yükü - Kapak kullanımıyla farklı teker çukuru derinlikleri (yaklaşık 390 mm ve 260 mm) - 8° eğimli ve 550 mm uzunluğunda arka uç - Rampaların kolay montajı/sökümü için kızaklı yapı - Yükleme sırasında destek için mekanik, yay destekli konforlu destek ayakları - Arka kısımda tam boy çamur koruyucu - Yükleme alanı başlangıcında ortada 1 çift 10.000 daN yükleme noktası - Yükleme alanı arka bölümünde ortada 1 çift 10.000 daN yükleme noktası - Yükleme alanı dış çerçevesinde 7 çift 10.000 daN yükleme noktası 3 akslı şasi: - BPW ECO Max marka, havalı süspansiyonlu aks - 245/70 R17.5 çift lastikli, 12 t aks kapasitesi - Jant üzeri lastik basınç sensörlü Lastik Basıncı İzleme Sistemi (RDKS) - 2x hidrolik zorunlu yönlendirmeli aks ve 1x sabit aks - Knorr marka (AB yönetmeliklerine uygun, EBS-E) fren sistemi - Knorr TIM G2 (Treyler Bilgi Modülü) - RSS (Devrilme Stabilite Desteği) - Standart ikinci yükseklik 895 mm (-100/+100) - Yönlendirme kontrolü; kablosuz uzaktan kumanda veya kuğu boynundaki düğme ile, tek izleme fonksiyonu dahil - 1. aks üzerinde yük bağımlı kaldırma aksı ve ilk kalkış yardımı (Zorunlu aks indirme fonksiyonu TIM üzerinden mümkün) 2 parçalı rampalar: - LxG 4.300 x 800 mm - 38t taşıma kapasitesi; zeminde ladin ağacı kaplama - Taşıma pozisyonunda güvenlik için rampanın kaldırma silindirinde entegre mekanik kilitleme - Rampa işlemleri: kaldırma ve yana kaydırma hidrolik - Uzaktan kumanda hem yönlendirme hem de arka fonksiyonları kontrol edebilir - Rampa kullanımı için elektro-hidrolik ünite Dahil olan aksesuarlar: - Arka duvar için park yeri dahil, yaklaşık 400 mm yüksekliğinde ön duvar - Kuğu boynu önünde dik yedek lastik tutucu, yedek lastik dahil Iedpfxszdzune Adqjig - Takozlar ve tutucuları - 3.000 mm’ye kadar genişletme için traversler - 400 mm yüksekliğinde alüminyum takma yan paneller, 2x yan panel (yaklaşık 3.150 mm uzunluğunda) ve rünlü, galvanizli arka panel - 2 çift 423 mm x 423 mm uyarı levhası, 2 konum lambası ve uyarı lambası için soket yeriyle - Ekskavatör çukuru sonunda takılabilir bir bent sacı - Traffideckgo kauçuk kaplama, yükleme alanı dış bölümünde 8 mm yükseklikte, arka eğim dahil, ön sabit bölüm hariç, kumlamalı - Arka eğimde yan tırmanma çıtaları - Arkada kırmızı kontur işareti - Yanda beyaz kontur işareti - Merkezi yağlama sistemi (yönlendirme ve şasi)

Durum: ikinci el, boş ağırlık: 11.880 kg, azami yük ağırlığı: 49.920 kg, dingil konfigürasyonu: > 3 aks, ilk tescil: 05/2026, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R17.5, renk: gri, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Kuğu boynu: -Yaklaşık 750 mm x 10°'lik arka eğime sahip kuğu boynu -3 çift sabitleme halkası (LC 5.000 daN) -30 mm kalınlığında sert ahşap kaplama Yükleme alanı: -Yaklaşık 1.000 mm x 8°'lik arka eğime sahip, çekilebilir yükleme alanı -Dışa doğru katlanabilen 5 çift sabitleme halkası (LC 5.000 daN) -Dışa doğru katlanabilen 3 çift sabitleme halkası (LC 10.000 daN) -Yükleme alanının önünde yatay konumda bulunan 1 çift sabitleme halkası (LC 10.000 daN) -Gerdirme bantlarının takılması için yükleme alanının dış çerçevesindeki boşluklar (LC 2.000 daN) -Yaklaşık 48 mm kalınlığında sert ahşap kaplama, aksların üzerinde tırtıklı sac kaplama Rampalar: -Yaklaşık 2.750 + 1.400 x 800 mm ölçülerinde, yaklaşık 48 mm kalınlığında sert ahşap kaplamalı, galvanizli iki parçalı çelik rampalar -Hidrolik olarak yukarı ve aşağı hareket ettirilebilen rampa parçalarına, hidrolik kaldırma mekanizmasına ve hidrolik olarak hareket ettirilebilen bir rampaya sahip -Çift başına maksimum yük: 40.000 kg Dorse destek ayakları: -24 ton kaldırma kapasitesine (50 ton test yükü) sahip 2 vitesli şanzımanlı JOST dorse destek ayakları (mekanik) Akslar ve lastikler: -BPW akslar, iki sabit aks, iki takip eden dönen aks -Hava süspansiyonlu, tamburlu frenli, kaldırma/indirme fonksiyonlu -Takip eden dönen akslar, elektro-manyetik geri vites kilidi ile geri vites veya manuel olarak etkinleştirilebilir -ECE R 141'e uygun TPMS lastik basıncı kontrol sistemi -Lastikler 235/75 R17.5 Boya: -Kaplama sisteminin optimum yapışması için korund ile yapılan yüzey hazırlığı -Tüm araç şasisinin ZINACOR 850 (85% çinko/15% alüminyum) ile HRM metalizasyonu -2 kat 2K üst kat boya ile son kat boyama, tek renk DB 7350 Novagrau Standart olarak dahil olan aksesuarlar: -Kuğu boynunda ve arkada, sol ve sağ tarafta, uyarı levhaları için birer adet tutucu, priz dahil -Tutucu ile birlikte bir yedek lastik -2" Kral pim -Yaklaşık 400 mm yüksekliğinde, galvanizli çelik ön panel -Ön taraftaki galvanizli bağlantı şeridinde, sarı-kırmızı hava bağlantı elemanları -4 adet takoz ve tutucu -Yükleme alanının eğiminin altında galvanizli katlanır destek ayakları -Dorrenin arkasında, etrafı aydınlatan bir lamba için bir tutucu -Rampalar ve yükleme alanı arasındaki boşluğu kapatmak için kapak levhaları -AB yönetmeliklerine uygun olarak yanlarda ve açılır kısımda beyaz reflektör şerit, arkada kırmızı -Arka tarafta, yükleme alanının altında elektro-hidrolik ünite -Rampalar için kontrol vanaları, dorse sağ tarafında -Arka tarafta çamurluk -Avrupa reflektör levhaları (kırmızı-sarı), dorse arka tarafında -USB çubuğunda kullanım kılavuzu ve açıklama -Yaklaşık 400 mm açılabilen dört adet uyarı levhası, yaklaşık 423 x 423 mm boyutlarında, bir konum lambası ile -Kuğu boynunda, takılabilir ALU yan duvarlar ve arka duvar, yaklaşık 2.440 x 400 mm -Arka, galvanizli takılabilir çerçeveler çıkarılabilir (yapının uzunluğu yaklaşık 2.560 mm) -Yükleme alanında, 1x 20ft, 2x 20ft veya 1x 40ft konteyner için 4 çift WADER konteyner cebi -Yükleme alanının dış çerçevesinde 100 x 50 mm takılabilir çerçeveler için 7 çift çerçeve cebi -Galvanizli, her iki tarafta yaklaşık 230 mm açılabilen genişletmeler -Ön aks üzerinde, mevcut aks yüküne ve mevcut yükleme durumuna bağlı olarak TEBS-E tarafından kontrol edilen kaldırılabilir aks -Yükleme alanının eğiminin dış çerçevesinde, her 200 mm'de 20 x 20 mm kare tırmanma çıtaları Iiodpfxszp Ntvj Adqjg -Kuğu boynundaki ve yükleme alanındaki tırtıklı saclarda, kaymayı önlemek için yüzeye entegre edilmiş bir kum tabakası -BEKAMAX

Durum: yeni, boş ağırlık: 29.600 kg, azami yük ağırlığı: 72.400 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: > 3 aks, yükleme alanı uzunluğu: 6.650 mm, yükleme alanı genişliği: 2.840 mm, yükleme alanı yüksekliği: 550 mm, lastik boyutu: 285/70 R19.5, renk: gri, işletme ağırlığı: 29.600 kg, Donanım: ABS, Gooseneck: - Gooseneck hydraulically liftable/lowerable and detachable - Length approx. 3,650 mm - For tractor units: 6 x 4 or 8 x 4 2-Axle Front Bogie: - Hook pick-up at front and rear - Chassis length x chassis width approx. 2,200 mm x 2,850 mm Excavator Deck 'BB-A': - Telescopic excavator deck 'BB-A' with drive-over bridge hooks at the front and bolt-eye coupling at the rear - Length x base width approx. 6,650 mm x 2,850 mm - Beam height x beam width approx. 400 mm x 1,350 mm - Loading height 550 mm with ground clearance 150 mm 4-Axle Rear Bogie: - Mechanical bolt-eye coupling for connecting a low-bed at the front, rear cross member at the back - Bogie length x bogie width approx. 5,480 mm x 2,850 mm - Numerous lashing points Pendulum Axle and Tyres (Front and Rear Bogie): - "PENDULUM AXLE", all axles hydromechanically forced-steered - Burst hose valve on axle compensation cylinders with automatic reset function - Hydraulic cylinders with shut-off valves and locking pins to secure in raised position - Final paint of axles with double-layer 2-component paint in MB 7350 Novagrau, single-color finish - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres: 285/70 R19.5 Remote Steering: - Steering from front and rear via cable remote control with push-buttons, including single-track alignment monitoring - Socket for remote steering operation on the gooseneck Iodswcmhaepfx Adqeig - Cable remote control with push-buttons including single-track alignment monitoring Included Accessories: - At the galvanized connection bar at the front: yellow-red air couplings - Steel front wall approx. 400 mm high - 4 wheel chocks - 3.5" kingpin - One 7-pin socket at left and right rear of the gooseneck for warning signs - Support bracket with winch for spare wheel at the front of the gooseneck - Truck hydraulic connection with flow controller (40 l/min), including bracket for suspension of supply lines; tractor unit tank must be at least 80 liters with couplings - Plug-in ALU side and tail boards on the gooseneck, approx. 400 mm high, anodized - Control lever on the gooseneck protected by a fold-down cover - Separate air connection with air gun on the gooseneck - Central lubrication system BEKAMAX, 1x on the gooseneck, 1x on the 2-axle bogie, and 1x on the 4-axle bogie - Variomax tool kit - Multi-coupling hydraulic connections on the gooseneck and in the area of the low-bed hook-up - 2 spare wheels - One 7-pin socket left and right, at the front and rear end of the rear bogie for the warning sign - Front bogie with separate air connection for air tools - Foldable extensions with steel deck inserts, width adjustable from approx. 2,850 mm to approx. 3,250 mm - Steel deck inserts can be placed in 2 positions to create a lowered loading area - Steel mats with 12 mm thick rubber surface - Screw-in option (⌀ 40 mm) every approx. 500 mm on the outside flange of the outer tube of the excavator deck for lashing rings - One locking position every approx. 500 mm at the extension with mechanical lock - Socket for cable remote control of the remote steering at the rear bogie - 2 reversing lights on the rear panel - Four warning signs extendable by approx. 2,000 mm approx. 423 x 423 mm with a position light - 1 work light left/right on the rear panel of the gooseneck with separate on/off switch - Two INOX toolboxes approx. 855 x 340 x 390 mm - 1-cylinder Hatz diesel engine (Silent Pack) - Wireless remote control for the remote steering

Durum: yeni, boş ağırlık: 10.350 kg, azami yük ağırlığı: 39.150 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Area: - Telescopic loading area with rear incline approx. 1,000 mm x 8° - 1 pair of fixed built-in wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses equipped with 15 x 15 mm square climbing strips and lower-section extensions - 1 pair of fixed wheel recesses between the 1st and 2nd axle, approx. 1,610 x 970 x 400 mm - 3-part removable galvanized covers over wheel recesses (W 670 mm) – max. point load 5 t / pc. - Recess in the ramp and extending into the load area to accommodate an excavator bucket arm approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator arm depression (LC 5,000 daN) - Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) One-piece ALU ramps: - One pair of single-piece ALU ramps approx. 2,500 x 600 mm - Ramps with spring assist and manual lateral adjustment - Maximum load per pair: 24,000 kg Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with raise/lower valve - Axle tools - Tyres 235/75 R 17.5 - TPMS (Tire Pressure Monitoring System) in compliance with ECE R 141 Accessories included: - One spare wheel with bracket in front of the bulkhead - 2" kingpin - One galvanized steel bulkhead ca. 400 mm high - Yellow-red air couplings at the galvanized front coupling strip - 4 chocks with bracket at the bulkhead - Accommodation at the rear of the gooseneck for ALU approach ramps - Galvanized extensions, extendable approx. 230 mm per side Iijdpfxsiu Er As Adqog - Galvanized folding supports under the rear incline of the loading area - Bracket for a rotating beacon at the rear of the trailer - White reflector tape in accordance with EU requirements on sides, red on extension and rear - On the gooseneck and rear panel, bracket for warning boards including socket, left and right - On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm - Removable rear galvanized stanchions (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the load area for a 20ft or 30ft container - 3 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading area - One removable galvanized intermediate table with 1 pair WADER container pockets - 20 x 20 mm square climbing strips every 200 mm along the outer frame of the loading area's rear incline - Non-slip sand coating painted onto the checker plate on the gooseneck and loading area - Four warning boards extendable by approx. 400 mm each, approx. 423 x 423 mm with position light - Bracket for rotating beacon on warning boards - 80 km/h speed stickers on the rear and both sides - Load gauge for axle load determination including load chart - HRM Metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces metallically finished with ZINACOR 850 (Zinc 85% - Alu 15%) hot metalized

Durum: yeni, boş ağırlık: 9.300 kg, azami yük ağırlığı: 38.700 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 1.200 mm, süspansiyon: hava, lastik boyutu: 385/65 R 22,5, renk: gri-siyah, Donanım: ABS, Loading Platform: • Loading platform in extendable design with pneumatically operated locking mechanism • Loading platform with approx. 30 mm thick wooden floor • 7 pairs of outward-folding lashing rings (LC 5,000 daN) • 3 pairs of outward-folding lashing rings (LC 10,000 daN) • Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Axles and Tyres: • BPW axles and suspension, all axles hydro-mechanically forced steered • Equipped with disc brakes • Technical axle load: 10,000 kg • Air suspension with raise/lower valve • Axle tools • Tyres: 385/65 R 22.5 • TPMS (Tyre Pressure Monitoring System) according to ECE R 141 Brake System: • WABCO brake system compliant with EU regulations, with EBS-E (2S2M) Electrical System: • Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) • ASPÖCK-UNIBOX on the front connection bar with sockets 24N, 24S & 15-pin • Connections according to ISO standards • 24N ISO-1185 • 24S ISO-3731 • 15-pin ISO-12098 Accessories Included: • Remote-controlled steering from front and rear via cable remote with push-button operation, including single-track monitoring of axles • 4 wheel chocks with holders mounted on the front wall • 2" kingpin • One galvanized steel front wall approx. 1,600 mm high • Yellow-red air couplings mounted on the galvanized front connection bar • White reflective tape according to EU regulations on the sides, at extension and at the rear of the trailer in red • European reflective plates (red-yellow) on the rear of the trailer • One mudflap at the rear of the trailer Iijdpfx Adjiu Etroqsg • Manual and description • Mounting bracket for a beacon at the rear of the trailer • Loading platform with approx. 30 mm thick wooden floor enclosed in omega profiles • 10 pairs of stake pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading platform • 1 spare wheel holder under the right side of the loading platform in the direction of travel • Electro-hydraulic unit • On the gooseneck and rear apron left and right, each with a bracket for warning boards including socket • Painted sand layer for anti-slip protection on the main beam • 6 pairs of WADER container locks on the loading platform, for 1x20ft, 2x 20ft, or 1x 40ft container; in the extension, an additional locking position is provided for a 45ft container • 4 pairs of crosswise mounted stake pocket bars on the loading platform for plug-in stanchions 100 x 50 mm • Access ladder mounted on the right in the direction of travel • One HDPE toolbox approx. 1,200 x 500 x 480 mm in front under the loading platform on the left in the direction of travel • BEKAMAX central lubrication system (Pico) with removable pump guard • Lift axle on the front axle controlled by TEBS E depending on current axle load and loading condition • Wireless remote control for the rear steering in addition to the cable remote, with indicator lights on the receiver for single-track monitoring • Four extendable warning plates approx. 400 mm extension, size approx. 423 x 423 mm with position light • Bracket for beacon on the warning plates • 80 km/h speed stickers on the rear and both sides • Load pressure gauge to determine axle loads, including load diagram • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then the defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) hot-finished

Durum: yeni, boş ağırlık: 9.300 kg, azami yük ağırlığı: 30.100 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, süspansiyon: hava, lastik boyutu: 235/75 R17.5, Donanım: ABS, Kuğu boynu: •Yaklaşık 750 mm x 10°'lik arka eğime sahip kuğu boynu •3 çift bağlama halkası (LC 5.000 daN) •30 mm kalınlığında sert ahşap kaplama Çekilebilir tasarımlı yük platformu: •Yaklaşık 1.000 mm x 8°'lik arka eğime sahip çekilebilir tasarımlı yük platformu •Dışa doğru katlanabilen 5 çift bağlama halkası (LC 5.000 daN) •Dışa doğru katlanabilen 3 çift bağlama halkası (LC 10.000 daN) •Yük platformunun ön tarafında yatar pozisyonda 1 çift bağlama halkası (LC 10.000 daN) •Gergi bantlarının takılması için yük platformunun dış çerçevesindeki boşluklar (LC 2.000 daN) •Yaklaşık 48 mm kalınlığında sert ahşap kaplama, aksların üzerinde tırtıklı sac kaplama Akslar ve lastikler: •BPW akslar, hidro-mekanik olarak zorunlu olarak yönlendirilir •Teknik aks yükü: 12.000 kg •Kaldırma ve indirme valfli hava süspansiyonu •ECE R 141'e uygun TPMS lastik basıncı kontrol sistemi •Lastikler 235/75 R17.5 3PMSF Boya: •Kaynak yapıldıktan sonra tüm çelik yapı, kum püskürtme makinesiyle otomatik olarak temizlenir •Kaplama sisteminin optimum yapışması için ikinci kum püskürtme işlemi korundum ile yapılır •En iyi korozyon korumasını sağlamak için tüm araç şasisinin HRM metalizasyonu ZINACOR 850 (85% çinko / 15% alüminyum) ile yapılır •Son kat boya, 2 kat 2K üst kat boya ile tek renk olarak DB 7350 Novagrau renginde uygulanır •Arka kısım metalize edilerek RAL 9010 (Saf Beyaz) renginde boyanır •Boya kaplaması, ISO 9227-NSS'ye göre tuzlu su püskürtme testinde test edilir •Boşlukların özel balmumu ile yalıtılması Elektrik sistemi: •AB yönetmeliklerine uygun elektrik sistemi, aydınlatma 24 Volt ASPÖCK-NORDIK (ASS3) •Tüm yan işaret lambaları, sinyal lambası ile birlikte yanıp söner •Ön bağlantı şeridindeki ASPÖCK-UNIBOX, 24N, 24S ve 15 pinli prizlerle donatılmıştır Pakete dahil olan aksesuarlar: •2" Kral mandalı •Yaklaşık 400 mm yüksekliğinde, galvanizli çelik ön duvar •Ön galvanizli bağlantı şeridinde sarı-kırmızı hava bağlantı elemanları •Ön duvara monte edilmiş 2 adet fren pabucu •Ön duvarın önünde bir adet yedek tekerlek ve tutucu •Elektro-hidrolik güç ünitesi •Önden ve arkadan, kablolu uzaktan kumanda ile basınç düğmeleri aracılığıyla çalıştırılabilen yardımcı direksiyon, aksların tek şerit kontrolü ile •Römorkun arkasında Avrupa reflektör tabelaları (Kırmızı-Sarı) •AB yönetmeliklerine uygun beyaz reflektör bandı, yanlarda ve çekilebilir kısımda, arkada kırmızı •Kuğu boynunda ve arka kısımda, sol ve sağ tarafta uyarı panoları için birer tutucu, priz dahil •Aracın arkasındaki ALU rampalar için kaydırılabilir bağlantı şeridi •Yük platformunun eğiminin altında galvanizli katlanır destekler Iijdpfszr Egdox Adqjg •Römorkun arkasında bir çamurluk •Kullanım kılavuzu ve açıklama •BEKAMAX (Pico) merkezi yağlama sistemi, normal yağ NLGI-2 ile ve pompanın etrafındaki çıkarılabilir koruma ile •Kuğu boynunda, takılabilir ALU yan duvarlar ve arka duvar, yaklaşık 2.440 x 400 mm •Arka galvanizli bağlantı elemanları çıkarılabilir (yapının uzunluğu yaklaşık 2.560 mm) •Yük platformunda 3 çift WADER konteyner cepleri, 1x 20 ft, 1x 30 ft veya 1x 40 ft konteyner için •Yük platformunun dış çerçevesinde 100 x 50 mm boyutlarında bağlantı elemanları için 6 çift cep •Sürüş yönünde sağ tarafta, yük platformunun altında INOX 1.500 x 390 x 810 boyutlarında bir alet kutusu •Yaklaşık 400 mm uzatılabilen dört uyarı panosu, yaklaşık 423 x 423 mm boyutlarında, bir konumlandırma lambası ile •Kablolu uzaktan kumandaya ek olarak, tek şerit kontrolü için alıcıda kontrol lambaları bulunan, radyo uzaktan kumandası •Kuğu

Durum: yeni, boş ağırlık: 10.600 kg, azami yük ağırlığı: 39.400 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: > 3 aks, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 760 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5, renk: gri, işletme ağırlığı: 10.600 kg, Donanım: ABS, Swan-neck: - Swan-neck with 30 mm thick hardwood flooring - Swan-neck at the rear in straight design - 3 pairs of lashing rings (LC 5,000 daN) Extendable loading platform: - Loading platform in extendable version - 5 pairs of fold-out lashing rings - 3 pairs of fold-out lashing rings - 1 pair of horizontal lashing rings at the front of the loading platform - Cut-outs in the outer frame of the loading platform for attaching tension belts - Hardwood flooring approx. 48 mm thick, checker plate covering above the axles Landing legs: - JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and tyres: - BPW axles, two fixed and two steering axles - Air suspension, drum brakes, with lift/lower function - The steering axles can be locked electro-magnetically via reverse gear or manually - Axle tools - Tyres: 205/65 R17.5 Brake system: - Brake system according to EU regulations with EBS-E (4S3M) Steel construction: - Steel structure made of high-strength fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations, 24 volt lighting, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection strip, with 24N, 24S & 15-pin sockets - Connections according to ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Paintwork: - First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat, single colour in Nova grey Iiedpfxst Ag Uwo Adqsg - Rear section metallized and painted in RAL 9010 (pure white) Included accessories: - One spare wheel with holder located in front of the bulkhead - 2" king pin - Galvanized steel front wall approx. 400 mm high - Yellow-red air couplings on the front galvanized connection strip - 4 wheel chocks with holder at the bulkhead - Galvanized folding supports under the sloped part of the loading platform - Holder for rotating beacon at the rear of the trailer - Galvanized, extendable width extensions approx. 230 mm per side - White reflective tape according to EU regulations on sides, at extension section, and red at rear - On swan-neck and rear panel: one mount each for warning panels including socket (left and right) - European reflective warning boards (red-yellow) at the rear of the trailer - TPMS tyre pressure monitoring system in accordance with ECE R 141 - On the swan-neck: removable ALU side panels and tailboard approx. 2,440 x 400 mm - The rear, galvanized stanchions are removable (length of superstructure approx. 2,560 mm) - 7 pairs of WADER container locks - 1x 20ft container on the loading platform; 1x 40ft container on the loading platform; 1x 40ft container over the swan-neck; 2x 20ft containers - 7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the loading platform - Lift axle at the front axle, controlled by TEBS E in relation to current axle load and loading status - Sliding hook-in rail for ALU loading ramps at the rear of the vehicle - Sanded, anti-slip coating painted onto checker plate on swan-neck and loading platform - Four warning panels extendable by approx. 400 mm each, approx. 423 x 423 mm, with a position lamp - Mount for rotating beacon on warning panels - Speed stickers 80 km/h at the rear and on both sides - Load gauge to determine axle loads, including load chart

Durum: yeni, boş ağırlık: 9.300 kg, azami yük ağırlığı: 30.100 kg, toplam ağırlık: 39.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R17.5, Donanım: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Extendable loading area: - Loading area in extendable design with rear bevel approx. 1,000 mm x 8° - 5 pairs of folding lashing rings to the outside (LC 5,000 daN) - 3 pairs of folding lashing rings to the outside (LC 10,000 daN) - 1 pair of flat lashing rings in the front of the loading area (LC 10,000 daN) - Cutouts in the external frame of the loading area for attaching tension belts (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick; chequer plate flooring over the axles Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lift capacity (50t test load) Iisdpfoyxc Eyjx Adqjg Axles and tires: - BPW axles with hydro-mechanical forced steering - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Axle tools - TPMS tire pressure monitoring system according to ECE R 141 - Tires 235/75 R17.5 3PMSF Accessories included: - 2" kingpin - One galvanized steel front wall approx. 400 mm high - Yellow and red air couplings on the galvanized front connector rail - 2 wheel chocks with holders on the front wall - One spare wheel with holder in front of the front wall - Electro-hydraulic power unit - Rear axle steering operable from front and rear via cable remote control with push buttons, including single-track axle alignment control - European reflector panels (red-yellow) at the trailer rear - White reflective tape according to EU regulations on the sides and extension, rear in red - On the gooseneck and at the rear, left and right, one bracket each for warning signs, including socket - Movable mounting rail for ALU approach ramps at the rear of the vehicle - A bracket for a beacon at the rear of the trailer - Galvanized folding supports under the loading area’s bevel - One mud flap at the rear of the trailer - Operating manual and description on USB stick - Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable cover around the pump - Plug-in ALU side walls and tailboard on the gooseneck, approx. 2,440 x 400 mm - The rear, galvanized plug-in stanchions are removable (structure length approx. 2,560 mm) - 3 pairs of WADER container pockets in the loading area for 1x 20ft, 1x 30ft, or 1x 40ft container - 6 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm in the external frame of the loading area - One INOX toolbox 1,500 x 390 x 810 under the loading area, right side in driving direction - Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm each with a position lamp - Beacon bracket on the warning signs - Radio remote control for rear axle steering, in addition to cable control, with indicator lights on the receiver for single-track alignment check - Sand-coated anti-slip layer painted on chequer plates on the gooseneck and loading area - 80 km/h speed stickers on the rear and both sides - Load manometer for determining axle loads, including a load chart

Durum: yeni, boş ağırlık: 12.300 kg, azami yük ağırlığı: 37.200 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R17.5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 30 mm thick hardwood flooring - 3 pairs of lashing rings Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system - Maximum load per pair: 30,000 kg Loading platform: - Loading platform with rear chamfer approx. 1,000 mm x 8° - Approx. 48 mm hardwood flooring, over the axles with checker plate surface Axles and tires: - BPW axles and suspension, two rigid axles, one self-steering axle - Air suspension with lift and lower valve - Self-steering axle with electro-magnetic reverse lockout, activated via reverse gear or manually - Tires 235/75 R17.5 3PMSF Accessories included: - 1 spare wheel with holder - TPMS tire pressure monitoring system according to ECE R 141 - 2" king pin - One galvanized steel headboard - Yellow-red air couplings on the galvanized connection rail at the front - 4 chocks with holders on the headboard - Mounting at the rear of the gooseneck for ALU drive-on ramps Iiedpfx Adstvfkfsqog - 3 height levels of aluminum planks - Galvanized folding supports under the chamfer of the loading platform - Height-adjustable tarpaulin frame (3,960 mm) - Galvanized headboard with tensioning mechanism for sliding curtain - Height adjustable by approx. 400 mm - Roof brand "EDSCHA" sliding forward on ALU roof rail profiles, bolted to front and rear wall - 3 pairs of sliding stakes in the loading platform - Body rear left and right hydraulically extendable by approx. 750 mm - Sliding roof with pivotable portal beam - Sliding curtain with 700 mm reserve length, with tension belts at spacing approx. 600 mm - Upper edge of structure approx. 3,960 mm high - Driving with open sliding roof is not permitted and will cause damage to the curtain - Cover plates for bridging the gap between ramps and loading platform - Electro-hydraulic unit at the rear, beneath the loading platform - At the gooseneck and at the ramps left and right each a bracket for warning panels incl. socket - Control valves for the ramps positioned on the right trailer side - 6 pairs of stake pockets for insertable stakes 100 x 50 mm in the outer frame of the loading platform - Lift axle at the front axle - Grating surface in the chamfer of the loading platform C40/4 (point load 3.4 t on an area of 20 x 20 cm) - One INOX toolbox 565 x 290 x 810 mm on the right in driving direction between the axles - On the checker plate on the gooseneck and loading platform, a painted sand layer for slip resistance - Central lubrication system BEKAMAX (Pico) with standard lubricant NLGI-2 and removable guard around the pump - Four warning panels extendable by approx. 400 mm, each approx. 423 x 423 mm, with position light - Load pressure gauge for determining axle loads including load chart - HRM metallization (High Resistance Metallization) of the outer frame - Complete steel structure shot-blasted, then visible defined surfaces hot-finished with ZINACOR 850 metallization (zinc 85% - alu 15%)

Durum: yeni, azami yük ağırlığı: 38.800 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5 3PMSF, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with front corners chamfered at 45° and rear bevel approximately 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable Loading Platform: - Extendable loading platform with rear bevel approximately 1,000 mm x 8° - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, over-axle areas with checker plate Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 self-tracking axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear or manually - Air suspension with raise/lower valve - Axle tools - 235/75 R 17.5 3PMSF Brake System: - WABCO braking system complying with EU regulations, with EBS-E (2S2M) Landing Legs: - JOST mechanical landing legs with 2-speed gearbox, 24 t lifting capacity (50 t test load) Accessories Included: - One spare wheel with holder in front of the front wall - 2" kingpin - Galvanised steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanised front connection strip - 4 wheel chocks with holders on the front wall - Bracket for beacon at rear of trailer - Recess at rear of gooseneck for ALU entry ramps - Galvanised folding supports under the loading platform's rear bevel - Cover plates to bridge gap between ramps and loading platform - White reflective tape according to EU regulations on sides, extendable section, and rear in red - Electro-hydraulic unit at the rear, under the loading platform - Brackets for warning signs on both left/right of gooseneck and ramps, with socket - Ramp control valves fitted on right-hand side of trailer - Mudflap at the trailer rear Iedeuqlmnepfx Adqoig - Manual and documentation on USB stick - ALU side boards and rear wall on gooseneck approx. 2,440 x 400 mm - Rear galvanised plug-in stanchions, removable (superstructure length approx. 2,560 mm) - Four approx. 400 mm extendable warning signs, approx. 423 x 423 mm, each with a position light - 3 pairs of WADER container locks in the loading platform for 20ft, 30ft or 40ft container - 6 pairs of stake pockets 100x50 mm in outer frame of loading platform - Galvanised extendable width extensions, approx. 230 mm per side - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading platform bevel - Sanded, painted anti-slip layer on checker plates over kingpin and loading platform - Holder for beacon on warning signs - European reflector boards (red-yellow) at the rear - 80 km/h speed limit stickers on rear and both sides - Load manometer for determining axle loads including load chart - HRM Metallisation (High Resistance Metallisation) of outer frame - Complete steel structure shot-blasted, then defined visible surfaces metallised with ZINACOR 850 (Zinc 85% - Aluminium 15%) hot-finished

Durum: yeni, boş ağırlık: 11.000 kg, azami yük ağırlığı: 38.500 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Platform: - Telescopic loading platform with rear chamfer approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and lower section widenings - Between the 1st and 2nd axle, a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm - Recess in the bevel and extending into loading platform for excavator stick approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the platform (LC 10,000 daN) - 5 pairs of outward-folding lashing rings (LC 5,000 daN) - 2 pairs of outward-folding lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in excavator stick recess (LC 5,000 daN) - Cut-outs in outer frame of loading platform for securing straps (LC 2,000 daN) - Incl. 3-piece removable galvanized covers over wheel recesses – max. point load 3.5 t / each Two-Piece Steel Ramps: - One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm hardwood covering - Ramp with hydraulically folding ramp sections, hydraulic lifting mechanism, and hydraulically shiftable Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock activated via reverse gear and manually - Air suspension with lifting and lowering valve - Axle tools - Tyres 235/75 R 17.5 - TPMS tyre pressure monitoring system in accordance with ECE R 141 Accessories Included: - Brackets for warning panels left and right on gooseneck and rear, incl. socket - One spare wheel - 2" kingpin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on galvanized connection rail at front - 4 wheel chocks - Galvanized, extendable widenings by approx. 230 mm per side - Galvanized folding supports under rear bevel of platform - Bracket for beacon at rear of trailer - Cover plates to bridge the gap between ramps and platform - White reflective tape to EU regulations on sides and extension, red at the rear - Electro-hydraulic unit at rear, under loading platform - Control valves for ramps positioned on right side of trailer - European reflector signs (red-yellow) on rear of trailer - Four extendable warning panels by approx. 400 mm, approx. 423 x 423 mm, with a position light - Mount for beacon on warning panels Ijdpfeup U Hzjx Adqsig - Removable ALU sideboards and tailgate on gooseneck approx. 2,440 x 400 mm - Rear galvanized removable stakes (body length approx. 2,560 mm) - 2 pairs WADER container locks in the loading platform for one 20ft or 30ft container - 3 pairs of stake pockets for plug-in stanchions 100 x 50 mm on the outer frame of the platform - One removable galvanized intermediate table with 1 pair WADER container locks - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the platform bevel - Anti-slip coated sand layer on tread plates of gooseneck and platform - 80 km/h speed limit stickers on the rear and on both sides - Load gauge for determining axle loads, including load diagram

Durum: yeni, boş ağırlık: 14.350 kg, azami yük ağırlığı: 53.450 kg, toplam ağırlık: 67.800 kg, dingil konfigürasyonu: > 3 aks, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, hidrolik arka platform, Gooseneck: - Gooseneck in SNT design to optimize the loading deck length, length approx. 3,700 mm - Gooseneck rear with chamfer approx. 1,000 mm x 10° - Suitable for tractor units: 6x2, 6x4, 8x4 short Loading Platform: - Loading platform with extendable design, length approx. 8,800 mm, with rear chamfer approx. 500 mm x 10° - Recess in the loading platform as well as extending into the chamfer for accommodating the excavator dipper stick, approx. 3,850 x 750 x 210/290 mm Two-Part Steel Ramps: - One pair of two-part steel ramps, each approx. 4,350 mm long and approx. 900 mm wide - Ramps with rubber covering - Ramps can be hydraulically adjusted individually approx. 235 mm outward and approx. 215 mm inward - "Super Grip" rubber flooring 25 mm and steel plate flooring approx. 5 mm as additional reinforcement on the chamfer of the platform - Square climbing strips 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles, suspension, and tires: - BPW axles and suspension, 1st axle steered, all other axles forced steered hydromechanically - Technical axle load: 12,000 kg - 1st axle with electromagnetic reversing lock, can be activated via reverse gear and manually - Air suspension with lifting and lowering valve - Tires 235/75 R 17.5 - TPMS tire pressure monitoring system compliant with ECE R141 - TPMS tire pressure sensors fitted on all wheels including spare wheels Surface Treatment: - Complete steel construction automatically shot-blasted with blasting machine after welding - Second blasting process with corundum for optimal adhesion of the coating system - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure best possible corrosion protection - Final coating with 2 layers of single-color 2-component topcoat in MB 7350 Novagrau Included Accessories: - Steel front wall, plug-in, approx. 400 mm high - 3kW electric-hydraulic power unit for hydraulic controls, except for hydraulic winches - 1 spare wheel - External beam on gooseneck with mounting holes for screwable lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings at the rear area of the gooseneck Iijdpfx Ajya E A Njdqog - On the gooseneck, 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized - On the gooseneck, 1 plug-in ALU rear board, approx. 400 mm high, anodized - Approx. 40 mm thick hardwood floor on the gooseneck, checker plate at the king pin area - 2" king pin - Round NATO socket at the front connector strip - 4 wheel chocks - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross beam - 8 pairs of recessed lashing rings in the outer frame of the loading platform, foldable outward - Extensions (galvanized) extendable by approx. 230 mm per side - Wheel recesses with square climbing strips, 15 x 15 mm, continuously open in front of the axles up to the cross beam of the gooseneck, approx. 700 x 410 mm - Wheel recesses with square climbing strips, 15 x 15 mm, between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - ALU covers for the wheel recesses, also usable as bridging elements for the extension or as extension beams - 1 pair of mechanical rear supports - Remote control (radio and cable) - Lifting axle at the front axle - Square climbing strips 20 x 30 mm, approx. every 200 mm - Central lubrication system with 1 pump - Wabco Smart Board system - 4 warning boards, approx. 423 x 423 mm

Durum: yeni, boş ağırlık: 7.900 kg, azami yük ağırlığı: 41.600 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, işletme ağırlığı: 7.900 kg, Donanım: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Area: - Loading area with rear bevel approx. 1,000 mm x 8° - Recess in the bevel and extending into the loading area for accommodating the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm - Cut-outs in the outer frame of the loading area for attaching tensioning straps - Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Landing Gear: - JOST landing legs (mechanical) with 2-speed gearbox, lifting capacity 24 t (test load 50 t) Axles and Tyres: - BPW axles and suspension, 2 fixed axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with lift and lower valve - TPMS tyre pressure monitoring system as per ECE R 141 - Tyres: 235/75 R 17.5 Paintwork: - Complete steel structure automatically blasted with shot blasting machine after welding - Second blasting with corundum for optimal coating adhesion - Final painting with 2 coats of 2K topcoat, single colour RAL MB 7350 Novagrau - Rims painted silver - Rear section metallised and painted RAL 9010 (Pure White) - Cavities sealed with special wax Electrical System: Isdjunrapjpfx Adqsig - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connection bar with sockets: 2 x 7-pin & 1 x 15-pin Accessories Included: - Numerous lashing positions - 2" king pin - One galvanised steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanised front connection bar - 4 wheel chocks with holder on the front wall - Holder at the rear of the gooseneck for ALU loading ramps - Galvanised folding support legs under the rear bevel of the loading area - Holder for rotating beacon at the rear of the trailer - Galvanised, extendable widenings approx. 230 mm per side - White reflective tape to EU regulations on the sides, red at the rear - Holders for warning panels with socket at the gooseneck and rear crossmember, left and right - Removable ALU sideboards and rear board on the gooseneck, approx. 2,440 x 400 mm - Removable rear galvanised stakes - 2 pairs of WADER container pockets in the loading area for a 20ft container - 6 pairs of post pockets (for 100 x 50 mm stakes) in the outer frame of the loading area - Movable mounting bar for ALU loading ramps at the rear of the vehicle - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading area bevel - Anti-slip sand coating applied to checker plates on gooseneck and loading area - Four extendable warning signs, approx. 400 mm extension, size 423 x 423 mm, each with a position light - Bracket for rotating beacon on the warning signs - 80 km/h speed stickers at rear and on both sides - European reflector panels (red/yellow) at rear of trailer - Manual and operating instructions on USB stick - HRM metallisation (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then all defined visible surfaces hot-finish metallised with ZINACOR 850 (zinc 85% - alu 15%)

Durum: iyi (kullanılmış), Üretim yılı: 2005, çalışma saatleri: 11.110 h, kaldırma yüksekliği: 14.750 mm, yakıt türü: dizel, motor üreticisi: Diesel - Cummins QSM11, Eğilebilir serpici Ön lastikler: 4 x 18.00-25 / hava / %40 - 60 Arka lastikler: 2 x 18.00-25 / hava / %40 - 60 Iijdpfxsut Rdds Adqjg Linde, yükün devrilerek boşaltılmasını sağlayan eğilebilir bir serpiciye sahiptir; kamera, merkezi yağlama sistemi Yanal kaydırıcı = Daha Fazla Bilgi = Şanzıman: 27 vites Kaldırma kapasitesi: 39.500 kg Teknik durum: iyi Görsel durum: iyi Ön lastik durumu: %40 - 60 Arka lastik durumu: %40 - 60 Ön lastikler: 18.00-25 Arka lastikler: 18.00-25 Daha fazla bilgi için Marco Levermann ile iletişime geçin.

Durum: yeni, boş ağırlık: 10.900 kg, azami yük ağırlığı: 37.100 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 890 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, işletme ağırlığı: 10.900 kg, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimizing the loading platform length, approx. 3,700 mm long, rear with approx. 1,000 mm x 6° chamfer - Technical fifth wheel load: 18,000 kg - For tractor units: 4 x 2 and 6 x 2 Loading Platform: - Loading area, approx. 9,600 mm long, with chamfer at the rear approx. 900 mm x 6° - Loading area behind the gooseneck hydraulically raiseable and lowerable, approx. 3,000 mm long, loadable up to approx. 9,000 kg - Grating surface and approx. 5 mm steel plate as additional reinforcement on the chamfered section of the loading area Ramps: - One pair of two-piece AXS steel ramps, approx. 4,675 mm long, approx. 900 mm wide - Grating surface - Hydraulically folding ramp tips - Ramps hydraulically adjustable individually approx. 235 mm outwards and approx. 365 mm inwards - Painted sand coating on the outer frame of the ramp as well as on the ramp tip Ijdjuadk Nspfx Adqeig - Flashing lights on the outer side of the ramp tips with switch next to the ramp control - Ramp locking in transport position with quick-release fastener Axles, Suspension and Tyres: - BPW axles and suspension, 1st and 2nd axle fixed, 3rd axle self-steering - 1st axle with starting aid - Operated via the brake pedal of the tractor unit - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - 235/75 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 - TPMS tyre pressure sensors fitted on all wheels including spares Brake System: - WABCO EBS-E braking system according to EU regulations Paintwork: - Trailer painted MB 7350 Novagrau grey Accessories Included: - Plug-in steel front wall, approx. 400 mm high - 3 kW electric hydraulic power pack for controlling hydraulic operations, except hydraulic winches - Guide plate from gooseneck for the fifth wheel plate, approx. 500 mm wide - JOST Module B – static test load = 50,000 kg - Continuous grating surface with 5 mm steel plate underneath as additional reinforcement - Painted sand coating - Cut-outs in the outer frame of the loading platform and lifting bed for attaching hydraulic ramp control valves on the right side of the vehicle - 2" king pin - Central lubrication system with one pump, brand BEKAMAX - On gooseneck, 1 pair of plug-in side ALU folding walls, approx. 400 mm high, anodized - Electric cable winch, approx. 5,400 kg pulling force, with radio remote control - Steel rope approx. 24 m long, rope ø approx. 9.5 mm, incl. rope press roller - WABCO Smart Board system - 4 extendable warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm

Durum: yeni, azami yük ağırlığı: 92.045 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: > 3 aks, Donanım: ABS, Donanım Özelliklerinden Özet Tam donanım talebe bağlıdır. Ijdpfx Ajzzhfnjdqjig * 1 x MAX710-Hals-V-30-2.70 kuğu boynu * Kuğu boynu hidrolik olarak kaldırılabilir/alçaltılabilir ve ayrıca geri çekilebilir * Uzunluk yaklaşık 3.650 mm. SZM 6x4 veya 8x4 için * Çelik ön duvar, yaklaşık 400 mm yüksekliğinde * Kuğu boynuna takılabilen ALU yan paneller ve arka panel, yaklaşık 400 mm yüksekliğinde, eloksal kaplama * 3,5 inç King pin * Debı kontrol cihazlı kamyon hidrolik bağlantısı (20 l/dk) * Besleme hatlarını asmak için kancalar dahil * SZM tankı en az 80 litre kapasiteye sahip olmalı ve MAX römork bağlantı parçalarına sahip olmalıdır; aksi takdirde bağlantı parçaları müşteri tarafından sağlanmalıdır * BEKA-MAX merkezi yağlama sistemi, normal yağ NLGI-2 ile çalışan bir kuğu boynu için * TPMS lastik basıncı kontrol sistemi * İki adet INOX alet kutusu, yaklaşık 855 x 340 x 390 mm, kuğu boynunun sol ve sağ tarafında (± 48 kg) * 1 silindirli Hatz dizel motor (Silent Pack), elektrikli marş ve marş aküsü ile * Kuğu boynundaki güç ünitesi ve bağlantı plakası arasındaki hidrolik bağlantı hatları * Uzaktan kumanda: Güç ünitesinin çalıştırılması, dizel motorun başlatılması/durdurulması * Kablo uzaktan kumandanın yanı sıra destekli direksiyonun çalıştırılması * Alıcıda tek şerit kontrolü için 2 adet LED kontrol lambası * Kuğu boynunun kaldırılması/alçaltılması * Süspansiyon sisteminin kaldırılması/alçaltılması * Kuğu boynundaki çoklu bağlantı hidrolik bağlantıları * Kuğu boynunun arka plakasında, sol ve sağ tarafta, ayrı bir açma/kapama anahtarına sahip 1 adet LED çalışma projektörü * Yaklaşık 423 x 423 mm boyutlarında, LED konum lambası ve döner lamba tutucusu olan, ± 2.000 mm'ye kadar uzayabilen dört adet uyarı panosu. (± 122 kg) * 1 x 3 akslı kompakt ön aks * MAX710-Aks-PA-F-3-19.5-1.36-2.85 * Ön ve arka tarafta kanca bağlantısı * Uzunluk: yaklaşık 3.560 mm * Aks genişliği: yaklaşık 2.850 mm * Ön aks, hava kompresörü için ayrı bir hava bağlantısına sahip * Normal yağ NLGI-2 ile çalışan 3 akslı bir aks için BEKA-MAX merkezi yağlama sistemi. * Ön aksın sol ve sağ arka tarafında, uyarı panoları için bir adet 7 kutuplu priz * TPMS lastik basıncı kontrol sistemi, ECE R 1411'e uygun * Ön aksın arka tarafında, ayrı bir açma/kapama anahtarına sahip, sol ve sağ tarafta LED çalışma projektörü * Ön aks yüzeyi, kaymayı önlemek için tek kat boyalı kum kaplama ile kaplı * Ön aks üzerindeki çoklu bağlantı hidrolik bağlantıları. * 1 x damperli römork şasisi: MAX710-Düşük Yataklı-BB-A-7.15-(430)-2.85 * Üzerinden geçilebilen köprü kancaları ön tarafta ve cıvatalı flanş bağlantısı arka tarafta olan, teleskopik damperli römork şasisi BB-A * Taban genişliği: yaklaşık 2.850 mm, Uzunluk: yaklaşık 7.150 mm * Destek yüksekliği: yaklaşık 430 mm, Destek genişliği: yaklaşık 1.350 mm * Yaklaşık 580 mm yükseklikte, yaklaşık 150 mm yerden yükseklikte * Yaklaşık 1.000 mm, 1 çift yaklaşık 500 mm boyutlarında altı çift çelik mat ve kauçuk zemin (± 1.660 kg) * Damperli römork şasisinin dış borusunun üst kordunda, yaklaşık 500 mm aralıklarla, cıvata halkaları için (LC 16.000 daN) yaklaşık 40 mm çapında vida yuvası * Damperli römork şasisinin iç borusunda, cıvata halkalarının monte edilmesi için yaklaşık 1.000 - 1.200 mm aralıklarla M30 vida yuvası (LC 10.000 daN) * Katlanabilir genişletmeler, çelik matlarla, yaklaşık 2.850 mm'den yaklaşık 3.250 mm'ye kadar genişlikte ayarlanabilir * TPMS lastik basıncı kontrol sistemi * Kletterleisten'li, yaklaşık 1.200 x 450 x 50/400 mm boyutlarında, HeProLen plastik takoz

Durum: yeni, boş ağırlık: 12.800 kg, azami yük ağırlığı: 36.200 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.850 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 375 mm, lastik boyutu: 245/70 R 17.5, renk: gri, işletme ağırlığı: 12.800 kg, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimized load bed length, approx. 3,750 mm long - Gooseneck hydraulically lift/lowerable and detachable - Technical fifth wheel load: 25,000 kg - Suitable for tractor units: 4x2, 6x2, and 6x4 Load bed: - Low bed with external beams, designed as a telescopic boiler bridge in low-profile construction with front extension - Length 6,850 mm x width 2,540 mm - One locking point approximately every 1,000 mm on the extension Rear running gear: - Rear running gear with closed outer frame with chequer plate cover and continuous prism-shaped excavator recess approx. 1,250/700 x 505 mm, open at the rear Axles, Suspension, and Tires: - "PENDULUM AXLE", all axles hydro-mechanically steered - Hose rupture valve on axle compensation cylinder with automatic reset function - Hydraulic cylinders with shut-off valves and securing pin for safe retention in raised position - Final coat of axles in 2-layer acrylic paint (2K), single color "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tires: 245/70 R 17.5 - TPMS tire pressure monitoring system according to ECE R 14 - TPMS pressure sensors mounted in all wheels, including spares Included accessories: - Plug-in steel front wall, approx. 400 mm high - 3 kW electro-hydraulic unit for controlling hydraulic functions, except for hydraulic winches - One spare wheel with mounting adapter Iijdpfevy Edcex Adqjg - Gooseneck outer beams with mounting holes for bolt-on lashing rings - Removable ALU side panels, approx. 400 mm high, anodized, on the gooseneck - One removable ALU rear panel, approx. 400 mm high, anodized, on the gooseneck - Chequer plate cover over the gooseneck - Gooseneck guide plate for the fifth wheel, approx. 500 mm wide - Gooseneck operation lighting with on/off switch - Hydraulic crossbeam to support the gooseneck on the tractor unit or a dolly - 2" king pin - Anti-slip sticker on the left chamfer of the gooseneck - Gooseneck closed at the rear upper area with a removable cover - 4 chocks with holders - Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings - 1 pair of steel ramps with climbing strips and retaining bolts for bridging the reception hooks of the low bed - The ramps can be placed above or between the hooks - Mounting facility for steel drive-on ramps at the rear between the outer beams of the gooseneck - Prepared for bolt-on container supports for 1x20ft on the outer beams - Mechanical pin and strap connection from low bed to running gear for load bed exchange or installation of extension beams - With electro-pneumatic-hydraulic couplings - Outer beams of the low bed with integrated sand coating as anti-slip protection - Removable loading floor (galvanized), can be inserted in 3 elements between the outer beams, with hardwood covering - Folding extensions, approx. 230 mm per side - Hook-in rail at the front of the rear running gear to the low bed for loose approach ramps - 2 pairs of stake pockets recessed in the external frame of the running gear, for plug-in stakes approx. 100 x 50 mm - Hook-in rail for loose ALU approach ramps on the rear cross member of the vehicle - Central lubrication system with 2 pumps - Remote control (radio and cable) - 4 extensible warning signs approx. 423 mm x 423 mm - Extensive lashing positions

Durum: yeni, boş ağırlık: 17.250 kg, azami yük ağırlığı: 48.700 kg, toplam ağırlık: 66.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.550 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 375 mm, lastik boyutu: 245/70 R 17.5, renk: gri, işletme ağırlığı: 17.250 kg, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimized load platform length, approximately 3,750 mm long - Gooseneck hydraulically liftable/lowerable and detachable - Suitable for tractor units: 6 x 4 and 8 x 4 (or 6 x 4 with optional 1-axle dolly) Low bed: - Low bed with external beams, configured as a telescopic vessel bridge in low construction with extension at the front - Length x width approx. 7,550 mm x 2,740 mm - Mechanical locking of the extension Chassis: - Rear chassis with closed outer frame - Tread plate covering and continuous prismatic excavator recess approx. 1,450/900 x 505 mm, open at the rear Axles, Suspension, and Tyres: - “PENDEL-AXLE”, all axles hydromechanically forced steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and locking pins for securing in raised position - Final coating of axles with 2 layers of single-colour 2-component paint in "FAY-Grey-34-0260" - Technical axle load 12,000 kg - Hydraulic axle compensation - 245/70 R 17.5 tyres Iodpfx Aeh Hm Tzodqoig Accessories: - Detachable steel front wall, approx. 400 mm high - 4 wheel chocks - Gooseneck closed at the rear upper section with a removable cover - 1 pair of steel ramps with climbing strips and fixing bolts for bridging the low bed uptake hooks - Ramps can be placed over or between the hooks - Mounting points for steel loading ramps at the rear between the external beams of the gooseneck - One locking position approximately every 1,000 mm on the extension - 1 lashing ring each left and right on the front cross member - Supply line connection strip to the tractor unit, fitted at the height of the outer frame profile - 6 pairs of threaded blocks on the outside of the inner beams of the load platform for mounting screw-on M24 rings - 6 pairs of recessed lashing rings on the outside of the outer beams of the load platform, foldable inwards and outwards - 1 pair of threaded blocks at the front and rear of the outer beams of the load platform for mounting screw-on M24 rings - Insertion strip for loose ALU approach ramps on the rear cross member of the vehicle - Central lubrication system with 2 pumps, brand BEKAMAX - Remote steering from front and rear, operable via cable remote control, with single-track control of axles - 3 kW electro-hydraulic power pack for operating hydraulic functions, except hydraulic winches - Removable load floor (galvanised), can be inserted in 3 elements between the outer beams, with hardwood covering - Folding extensions, approx. 230 mm per side - Loose widening boards, framed in steel - 4 warning panels approx. 423 x 423 mm - Radio remote control for remote steering operation - 3.5" kingpin - Anti-slip stickers on the left bevel of the gooseneck - Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings - Guiding plate from gooseneck for the fifth wheel plate, approx. 800 mm wide - 1 spare wheel with mounting adapter - Parking position on the gooseneck for warning panels when not in use - 2 pairs of stanchion pockets recessed in the outer frame of the chassis for insertable stanchions approx. 100 x 50 mm - Rear section of the chassis with a detachable plate closing the bucket arm recess at the rear - Trailer colour MB 7350 Novagrau

Durum: yeni, boş ağırlık: 10.300 kg, azami yük ağırlığı: 39.200 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Area: - Loading area after the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8° - Cut-outs in the outer frame of the loading area for securing tension straps (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, chequer plate flooring above the axles Two-part Steel Ramps: - One pair of galvanized, two-part steel ramps approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding and unfolding ramp sections, hydraulic lifting mechanism, and hydraulically adjustable - Maximum load per pair: 40,000 kg Axles, Suspension and Tyres: - BPW axles and suspension, 2 axles rigid, 1 axle trailing steer - Technical axle load: 12,000 kg - Electro-magnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lowering valve - Axle tools - Tyres 235/75 R 17.5 3PMSF - TPMS tyre pressure monitoring system according to ECE R 141 Included Accessories: - One spare wheel with holder in front of the bulkhead - 2" kingpin - One galvanized steel front wall approx. 400 mm high Iiodpfou Hp Hrsx Adqeg - Yellow-red air couplings at the galvanized connection rail at the front - 4 wheel chocks - Galvanized folding supports under the chamfer of the loading area - One holder for a beacon at the rear of the trailer - Cover plates to bridge the gap between the ramps and the loading area - White reflective tape according to EU regulations on the sides of the trailer and red on the rear - Electro-hydraulic unit at the rear, under the loading area - Holder for warning signs left and right on the gooseneck and ramps, including socket - Control valves for the ramps located on the right side of the trailer - European reflective boards (red-yellow) at the rear of the trailer - Manual and description on USB stick - On the gooseneck, ALU drop-in side boards and rear wall approx. 2,440 x 400 mm - The rear, galvanized drop-in stakes are removable (length of superstructure approx. 2,560 mm) - An electric cable winch with radio remote control, approx. 5,400 kg lifting force, including 9.5 mm thick steel cable, 24 m long with cable guide roller - Bolted 5t ring for running the winch cable on the gooseneck without pulley - 2 pairs of WADER container pockets in the loading area for one 20ft container - 6 pairs of stake pockets for drop-in stakes 100 x 50 mm in the outer frame of the loading area - Lift axle on the front axle controlled by TEBS E depending on the current axle load and load status - 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN) - 1 pair of recessed lashing rings along the central beam at the rear in the chamfer (LC 10,000 daN) - On the chequer plates on the gooseneck and the loading area, painted sand layer as slip resistance - BEKAMAX centralized lubrication system (Pico) with standard grease NLGI-2 and removable guard for the pump - Four warning boards extendable by approx. 400 mm, size approx. 423 x 423 mm - 80 km/h speed stickers at the rear and on both sides - Load gauge to determine axle loads, including load diagram - HRM metallization (High Resistance Metallization) of the outer frame - Complete steel structure shot blasted, then defined visible surfaces hot-coated in metallization with ZINACOR 850 (85% zinc - 15% aluminium)

Durum: yeni, azami yük ağırlığı: 96.500 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: > 3 aks, yükleme alanı uzunluğu: 26.900 mm, toplam genişlik: 2.750 mm, Donanım: ABS, Our complete range of vehicles, including those available immediately and at short notice, can be found on our website. Excerpt from the equipment features. Full equipment details available on request. Gooseneck: * Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm * For tractors: 6 x 4 or 8 x 4 * Truck hydraulic connection with flow regulator (20 l/min), including gallows for suspension of supply lines. The tractor's tank must have a minimum capacity of 80 L * With MAX Trailer couplings, otherwise coupling parts to be supplied ex works by the customer * Gallows with winch for spare wheel located at the front of the gooseneck * 3.5 inch kingpin * Steel front wall approx. 400 mm high * Plug-in aluminium side and rear boards for the gooseneck, approx. 400 mm high, anodized finish * Operating levers on the gooseneck protected by a foldable cover * Illuminated controls at the gooseneck, with on/off switch * One 7-pin socket left and right at the rear of the gooseneck for warning sign * BEKA-MAX central lubrication system for a gooseneck using standard grease NLGI-2 * Hydraulic couplings from gooseneck to lowbed deck with screw-type couplers * Access steps to the gooseneck * Four warning panels extendable approx. 1,000 mm, approx. 423 x 423 mm, with one LED marker light and bracket for rotating beacon * Mounting adapter for 2 spare wheels * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 HP) at 3,000 rpm * Hydraulic connection lines between the power pack and the connector plate at the gooseneck * One LED work light left and right at the rear plate of the gooseneck with separate on/off switches * Radio remote control: - Operation of the power pack, start/stop of the diesel engine. - Operation of steering, in addition to cable remote control, with 2 LED indicators on the receiver for single-track monitoring. - Operation of raising/lowering the gooseneck. - Operation of raising/lowering suspension of running gear. Iisdpfozahp Ssx Adqeg 2-Axle Front Bogie: * Pin-eye coupling front and rear. Length: approx. 2,970 mm; bogie width: approx. 2,750 mm * BEKA-MAX central lubrication system for a 2-axle bogie with standard grease NLGI-2 (not connected to the tie rods) * One 7-pin socket left and right at the rear of the front bogie for warning panels * Bogie surface finished with painted-in sand coating for slip-resistance * Yellow reflective tape according to EU regulations on the side, at extension and at the rear of the trailer * One 7-pin socket for warning panels, left and right at the front bogie, in the axle area * Extendable extensions of approx. 230 mm per side for a 2-axle bogie * 1 pair of M42 threaded blocks between the axles of the front bogie * 1 pair of brackets for warning panels to be inserted into the stake pockets on the outer frame of the load bed Load Bed: * 6-axle, double telescopic load bed with pin-eye coupling at the front and a rear bevel of approx. 500 mm x 8° * Load bed length: approx. 11,000 mm * Technically extendable by approx. 8,200 + 7,700 mm * Axle spacing: approx. 1,500 mm * Standard width: approx. 2,750 mm * Hydraulic coupling pin * BEKA-MAX central lubrication system for the load bed with standard grease NLGI-2 * Load bed surface finished with painted-in sand coating for slip-resistance * 11 pairs of recessed lashing rings in the outer frame of the load bed, foldable outwards (LC 10,000 daN) * Permanently welded intermediate platform, approx.

Durum: ikinci el, Üretim yılı: 2016, boş ağırlık: 104 kg, 600 mm yük merkezinde 2500 kg taşıma kapasitesi, çatal kesiti 150 x 45 mm, çatal uzunluğu: 1200 mm, askı: FEM2A, kendi ağırlık merkezi: 423 mm, ikinci el KAUP yan kaydırıcı 2T151P2 genişlik 1150 mm, taşıma kapasitesi 2500 kg / yük merkezi 600 mm, yapı genişliği 1150 mm, askı FEM2, ağırlık merkezi mesafesi 43 mm, kendi ağırlığı 97 kg, ön yapı ölçüsü 72 mm, DURWEN DURWEN TGZ 25, temel uzunluk 1200 mm, taşıma kapasitesi 2.500 kg / 600 mm, FEM II A, çatal uzunluğu: 1200, yük merkezi: 600, kendi ağırlık merkezi: 423. Ijdoxyhbyspfx Adqsig